The optional mdio property will be used by dsa switch to configure
slave_mii_bus when the driver does not allocate it during setup.
Some drivers already offer/require a similar property but, in some
cases, they rely on a compatible string to identify the mdio bus node.
Each subdriver might decide to keep existing approach or migrate to this
new common property.
Signed-off-by: Luiz Angelo Daros de Luca <[email protected]>
---
Documentation/devicetree/bindings/net/dsa/dsa.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index b9d48e357e77..f9aa09052785 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -32,6 +32,12 @@ properties:
(single device hanging off a CPU port) must not specify this property
$ref: /schemas/types.yaml#/definitions/uint32-array
+ mdio:
+ unevaluatedProperties: false
+ description:
+ Container of PHY and devices on the switches MDIO bus.
+ $ref: /schemas/net/mdio.yaml#
+
patternProperties:
"^(ethernet-)?ports$":
type: object
--
2.35.1
On Mon, Feb 21, 2022 at 05:01:02PM -0300, Luiz Angelo Daros de Luca wrote:
> The optional mdio property will be used by dsa switch to configure
> slave_mii_bus when the driver does not allocate it during setup.
>
> Some drivers already offer/require a similar property but, in some
> cases, they rely on a compatible string to identify the mdio bus node.
> Each subdriver might decide to keep existing approach or migrate to this
> new common property.
Your threading of these two patches is broken. The usual way to do this is
git format-patch HEAD~2
git send-email *.patch
You will then get uniform subject lines and the two emails threaded
together.
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
On Mon, Feb 21, 2022 at 05:01:02PM -0300, Luiz Angelo Daros de Luca wrote:
> The optional mdio property will be used by dsa switch to configure
> slave_mii_bus when the driver does not allocate it during setup.
>
> Some drivers already offer/require a similar property but, in some
> cases, they rely on a compatible string to identify the mdio bus node.
That case will fail with this change. It precludes any binding
referencing dsa.yaml from defining a 'mdio' node with properties other
than what mdio.yaml defines.
The rule is becoming any common schema should not define more than one
level of nodes if those levels can be extended.
> Each subdriver might decide to keep existing approach or migrate to this
> new common property.
>
> Signed-off-by: Luiz Angelo Daros de Luca <[email protected]>
> ---
> Documentation/devicetree/bindings/net/dsa/dsa.yaml | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> index b9d48e357e77..f9aa09052785 100644
> --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> @@ -32,6 +32,12 @@ properties:
> (single device hanging off a CPU port) must not specify this property
> $ref: /schemas/types.yaml#/definitions/uint32-array
>
> + mdio:
> + unevaluatedProperties: false
> + description:
> + Container of PHY and devices on the switches MDIO bus.
> + $ref: /schemas/net/mdio.yaml#
> +
> patternProperties:
> "^(ethernet-)?ports$":
> type: object
> --
> 2.35.1
>
>
> On Mon, Feb 21, 2022 at 05:01:02PM -0300, Luiz Angelo Daros de Luca wrote:
> > The optional mdio property will be used by dsa switch to configure
> > slave_mii_bus when the driver does not allocate it during setup.
> >
> > Some drivers already offer/require a similar property but, in some
> > cases, they rely on a compatible string to identify the mdio bus node.
>
> That case will fail with this change. It precludes any binding
> referencing dsa.yaml from defining a 'mdio' node with properties other
> than what mdio.yaml defines.
Thanks Rob.
I believe any DSA drivers mdio subnodes will reference mdio.yaml. It
doesn't make sense to not to. So, it is fine to restrict that from
dsa.yaml. Are you saying that it will also prevent extra properties
inside that mdio, either declared in dsa.yaml or in any other dsa
driver yaml?
During my tests, it looks like both "mdio", from dsa.yaml or the
<driver>.yaml are validated independently. I can include a new
property or even a "required" on either level and the checks seem to
work fine. I didn't try it harder but I believe I cannot negate/drop a
property or a requirement declared in one YAML file using the other
YAML. But, in this case, dsa.yaml mdio is only referencing mdio.yaml,
just like any dsa driver would do.
And about the compatibile string usage, it is more about code than
schema. I did checked every driver and got these results:
These already uses mdio name:
- drivers/net/dsa/qca8k.c:
of_get_child_by_name(priv->dev->of_node, "mdio");
- drivers/net/dsa/mv88e6xxx/chip.c: of_get_child_by_name(np, "mdio");
- drivers/net/dsa/qca/ar9331.c: of_get_child_by_name(np, "mdio")
This one creates a new mdios container for its two mdio nodes. So,
they are at a different level:
- drivers/net/dsa/sja1105/sja1105_mdio.c:
of_get_compatible_child(mdio_node, "nxp,sja1110-base-tx-mdio");
- drivers/net/dsa/sja1105/sja1105_mdio.c:
of_get_compatible_child(mdio_node, "nxp,sja1110-base-t1-mdio");
realtek-smi, even before yaml conversion required a mdio node
(although code only looks for the compatible strings),
- drivers/net/dsa/realtek/realtek-smi.c
of_get_compatible_child(priv->dev->of_node, "realtek,smi-mdio");
This one is the most problematic one. It only has a TXT that does not
mention an "mdio" node name, although examples do use it.
- drivers/net/dsa/lantiq_gswip.c:
of_get_compatible_child(dev->of_node, "lantiq,xrx200-mdio");
I still don't get why the compatible string is in use when there is a
finite number of (or only one) mdio nodes. Wouldn't it be easier to
use of_get_child_by_name? Anyway, all of them might not collide with
dsa mdio definition.
> The rule is becoming any common schema should not define more than one
> level of nodes if those levels can be extended.
Sorry but I didn't understand what you are suggesting. Should I simply
drop the dsa/mdio doc?
> > Each subdriver might decide to keep existing approach or migrate to this
> > new common property.
> >
> > Signed-off-by: Luiz Angelo Daros de Luca <[email protected]>
> > ---
> > Documentation/devicetree/bindings/net/dsa/dsa.yaml | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> > index b9d48e357e77..f9aa09052785 100644
> > --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> > +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> > @@ -32,6 +32,12 @@ properties:
> > (single device hanging off a CPU port) must not specify this property
> > $ref: /schemas/types.yaml#/definitions/uint32-array
> >
> > + mdio:
> > + unevaluatedProperties: false
> > + description:
> > + Container of PHY and devices on the switches MDIO bus.
> > + $ref: /schemas/net/mdio.yaml#
> > +
> > patternProperties:
> > "^(ethernet-)?ports$":
> > type: object
> > --
> > 2.35.1
> >
> >