On 24-02-22, 08:11, Lukasz Luba wrote:
> diff --git a/drivers/opp/of.c b/drivers/opp/of.c
>
> +/*
> + * Callback function provided to the Energy Model framework upon registration.
> + * It provides the power used by @dev at @kHz if it is the frequency of an
> + * existing OPP, or at the frequency of the first OPP above @kHz otherwise
> + * (see dev_pm_opp_find_freq_ceil()). This function updates @kHz to the ceiled
> + * frequency and @mW to the associated power.
> + *
> + * Returns 0 on success or a proper -EINVAL value in case of error.
> + */
> +static int __maybe_unused
> +_get_opp_power(unsigned long *mW, unsigned long *kHz, struct device *dev)
Lets call it _get_dt_opp_power() or _get_dt_power() ?
> +{
> + struct dev_pm_opp *opp;
> + unsigned long opp_freq, opp_power;
> +
> + /* Find the right frequency and related OPP */
> + opp_freq = *kHz * 1000;
> + opp = dev_pm_opp_find_freq_ceil(dev, &opp_freq);
> + if (IS_ERR(opp))
> + return -EINVAL;
> +
> + opp_power = dev_pm_opp_get_power(opp);
As I said in 2/4, this should really give the total instead.
> + dev_pm_opp_put(opp);
> + if (!opp_power)
> + return -EINVAL;
> +
> + *kHz = opp_freq / 1000;
> + *mW = opp_power / 1000;
> +
> + return 0;
> +}
> +
> /*
> * Callback function provided to the Energy Model framework upon registration.
> * This computes the power estimated by @dev at @kHz if it is the frequency
> @@ -1488,6 +1520,24 @@ static int __maybe_unused _get_power(unsigned long *mW, unsigned long *kHz,
> return 0;
> }
>
> +static bool _of_has_opp_microwatt_property(struct device *dev)
> +{
> + unsigned long power, freq = 0;
> + struct dev_pm_opp *opp;
> +
> + /* Check if at least one OPP has needed property */
> + opp = dev_pm_opp_find_freq_ceil(dev, &freq);
> + if (IS_ERR(opp))
> + return false;
> +
> + power = dev_pm_opp_get_power(opp);
> + dev_pm_opp_put(opp);
> + if (!power)
What if this particular frequency has 0 power mentioned for some
reason :)
Instead of this heavy stuff, just pick the first OPP from the opp
table and see its power-value.
> + return false;
> +
> + return true;
> +}
> +
> /**
> * dev_pm_opp_of_register_em() - Attempt to register an Energy Model
> * @dev : Device for which an Energy Model has to be registered
> @@ -1517,6 +1567,14 @@ int dev_pm_opp_of_register_em(struct device *dev, struct cpumask *cpus)
> goto failed;
> }
>
> + /* First, try to find more precised Energy Model in DT */
> + if (_of_has_opp_microwatt_property(dev)) {
> + struct em_data_callback em_dt_cb = EM_DATA_CB(_get_opp_power);
> +
> + return em_dev_register_perf_domain(dev, nr_opp, &em_dt_cb,
> + cpus, true);
> + }
> +
We have another em_dev_register_perf_domain() down the line, lets keep
only one such call and get it a callback that should be set in an
if/else loop.
> np = of_node_get(dev->of_node);
> if (!np) {
> ret = -EINVAL;
> --
> 2.17.1
--
viresh
On 2/24/22 09:13, Viresh Kumar wrote:
> On 24-02-22, 08:11, Lukasz Luba wrote:
>> diff --git a/drivers/opp/of.c b/drivers/opp/of.c
>>
>> +/*
>> + * Callback function provided to the Energy Model framework upon registration.
>> + * It provides the power used by @dev at @kHz if it is the frequency of an
>> + * existing OPP, or at the frequency of the first OPP above @kHz otherwise
>> + * (see dev_pm_opp_find_freq_ceil()). This function updates @kHz to the ceiled
>> + * frequency and @mW to the associated power.
>> + *
>> + * Returns 0 on success or a proper -EINVAL value in case of error.
>> + */
>> +static int __maybe_unused
>> +_get_opp_power(unsigned long *mW, unsigned long *kHz, struct device *dev)
>
> Lets call it _get_dt_opp_power() or _get_dt_power() ?
OK, I'll return to _get_dt_power()
>
>> +{
>> + struct dev_pm_opp *opp;
>> + unsigned long opp_freq, opp_power;
>> +
>> + /* Find the right frequency and related OPP */
>> + opp_freq = *kHz * 1000;
>> + opp = dev_pm_opp_find_freq_ceil(dev, &opp_freq);
>> + if (IS_ERR(opp))
>> + return -EINVAL;
>> +
>> + opp_power = dev_pm_opp_get_power(opp);
>
> As I said in 2/4, this should really give the total instead.
make sense
>
>> + dev_pm_opp_put(opp);
>> + if (!opp_power)
>> + return -EINVAL;
>> +
>> + *kHz = opp_freq / 1000;
>> + *mW = opp_power / 1000;
>> +
>> + return 0;
>> +}
>> +
>> /*
>> * Callback function provided to the Energy Model framework upon registration.
>> * This computes the power estimated by @dev at @kHz if it is the frequency
>> @@ -1488,6 +1520,24 @@ static int __maybe_unused _get_power(unsigned long *mW, unsigned long *kHz,
>> return 0;
>> }
>>
>> +static bool _of_has_opp_microwatt_property(struct device *dev)
>> +{
>> + unsigned long power, freq = 0;
>> + struct dev_pm_opp *opp;
>> +
>> + /* Check if at least one OPP has needed property */
>> + opp = dev_pm_opp_find_freq_ceil(dev, &freq);
>> + if (IS_ERR(opp))
>> + return false;
>> +
>> + power = dev_pm_opp_get_power(opp);
>> + dev_pm_opp_put(opp);
>> + if (!power)
>
> What if this particular frequency has 0 power mentioned for some
> reason :)
If that power 0 would be allowed here, then in next step when EM
calls active_power() we check !power and report dev_err().
IPA design would also not accept the power=0
>
> Instead of this heavy stuff, just pick the first OPP from the opp
> table and see its power-value.
It is the first opp: freq=0.
You mean by parsing the the DT node instead, like I had in v2 version?
>
>> + return false;
>> +
>> + return true;
>> +}
>> +
>> /**
>> * dev_pm_opp_of_register_em() - Attempt to register an Energy Model
>> * @dev : Device for which an Energy Model has to be registered
>> @@ -1517,6 +1567,14 @@ int dev_pm_opp_of_register_em(struct device *dev, struct cpumask *cpus)
>> goto failed;
>> }
>>
>> + /* First, try to find more precised Energy Model in DT */
>> + if (_of_has_opp_microwatt_property(dev)) {
>> + struct em_data_callback em_dt_cb = EM_DATA_CB(_get_opp_power);
>> +
>> + return em_dev_register_perf_domain(dev, nr_opp, &em_dt_cb,
>> + cpus, true);
>> + }
>> +
>
> We have another em_dev_register_perf_domain() down the line, lets keep
> only one such call and get it a callback that should be set in an
> if/else loop.
OK
On 24-02-22, 09:33, Lukasz Luba wrote:
> On 2/24/22 09:13, Viresh Kumar wrote:
> > On 24-02-22, 08:11, Lukasz Luba wrote:
> > > diff --git a/drivers/opp/of.c b/drivers/opp/of.c
> > > +static bool _of_has_opp_microwatt_property(struct device *dev)
> > > +{
> > > + unsigned long power, freq = 0;
> > > + struct dev_pm_opp *opp;
> > > +
> > > + /* Check if at least one OPP has needed property */
> > > + opp = dev_pm_opp_find_freq_ceil(dev, &freq);
> > > + if (IS_ERR(opp))
> > > + return false;
> > > +
> > > + power = dev_pm_opp_get_power(opp);
> > > + dev_pm_opp_put(opp);
> > > + if (!power)
> >
> > Instead of this heavy stuff, just pick the first OPP from the opp
> > table and see its power-value.
>
> It is the first opp: freq=0.
> You mean by parsing the the DT node instead, like I had in v2 version?
No, I was thinking if you can simply do:
opp = list_first_entry(&opp_table->opp_list, struct dev_pm_opp, node);
But that requires locking, etc as well. So maybe this is fine.
--
viresh