For SoundWire Frame sync to be generated correctly we need both MCLK
and MCLKx2 (npl). Without pm runtime enabled these two clocks will remain on,
however after adding pm runtime support its possible that NPl clock could be
turned off even when SoundWire controller is active.
Fix this by enabling mclk and npl clk when SoundWire clks are enabled.
Signed-off-by: Srinivas Kandagatla <[email protected]>
---
sound/soc/codecs/lpass-wsa-macro.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/lpass-wsa-macro.c b/sound/soc/codecs/lpass-wsa-macro.c
index ac5f94fff0a9..2586d6350f20 100644
--- a/sound/soc/codecs/lpass-wsa-macro.c
+++ b/sound/soc/codecs/lpass-wsa-macro.c
@@ -2260,6 +2260,13 @@ static int wsa_swrm_clock(struct wsa_macro *wsa, bool enable)
struct regmap *regmap = wsa->regmap;
if (enable) {
+ int ret;
+
+ ret = clk_prepare_enable(wsa->mclk);
+ if (ret) {
+ dev_err(wsa->dev, "failed to enable mclk\n");
+ return ret;
+ }
wsa_macro_mclk_enable(wsa, true);
/* reset swr ip */
@@ -2284,6 +2291,7 @@ static int wsa_swrm_clock(struct wsa_macro *wsa, bool enable)
regmap_update_bits(regmap, CDC_WSA_CLK_RST_CTRL_SWR_CONTROL,
CDC_WSA_SWR_CLK_EN_MASK, 0);
wsa_macro_mclk_enable(wsa, false);
+ clk_disable_unprepare(wsa->mclk);
}
return 0;
@@ -2354,7 +2362,7 @@ static int wsa_macro_register_mclk_output(struct wsa_macro *wsa)
struct clk_init_data init;
int ret;
- parent_clk_name = __clk_get_name(wsa->mclk);
+ parent_clk_name = __clk_get_name(wsa->npl);
init.name = clk_name;
init.ops = &swclk_gate_ops;
--
2.21.0