Since the _OUTPUT variable holds a value ending with a trailing slash,
there is no need to add another one when defining BOOTSTRAP_OUTPUT and
LIBBPF_OUTPUT variables.
When defining LIBBPF_INCLUDE and LIBBPF_BOOTSTRAP_INCLUDE, we shouldn't
add an extra slash either for the same reason.
When building libbpf, the value of the DESTDIR argument should also not
end with a trailing slash.
Signed-off-by: Yuntao Wang <[email protected]>
---
tools/bpf/bpftool/Makefile | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile
index ba647aede0d6..9800f966fd51 100644
--- a/tools/bpf/bpftool/Makefile
+++ b/tools/bpf/bpftool/Makefile
@@ -18,19 +18,19 @@ BPF_DIR = $(srctree)/tools/lib/bpf
ifneq ($(OUTPUT),)
_OUTPUT := $(OUTPUT)
else
- _OUTPUT := $(CURDIR)
+ _OUTPUT := $(CURDIR)/
endif
-BOOTSTRAP_OUTPUT := $(_OUTPUT)/bootstrap/
+BOOTSTRAP_OUTPUT := $(_OUTPUT)bootstrap/
-LIBBPF_OUTPUT := $(_OUTPUT)/libbpf/
+LIBBPF_OUTPUT := $(_OUTPUT)libbpf/
LIBBPF_DESTDIR := $(LIBBPF_OUTPUT)
-LIBBPF_INCLUDE := $(LIBBPF_DESTDIR)/include
+LIBBPF_INCLUDE := $(LIBBPF_DESTDIR)include
LIBBPF_HDRS_DIR := $(LIBBPF_INCLUDE)/bpf
LIBBPF := $(LIBBPF_OUTPUT)libbpf.a
LIBBPF_BOOTSTRAP_OUTPUT := $(BOOTSTRAP_OUTPUT)libbpf/
LIBBPF_BOOTSTRAP_DESTDIR := $(LIBBPF_BOOTSTRAP_OUTPUT)
-LIBBPF_BOOTSTRAP_INCLUDE := $(LIBBPF_BOOTSTRAP_DESTDIR)/include
+LIBBPF_BOOTSTRAP_INCLUDE := $(LIBBPF_BOOTSTRAP_DESTDIR)include
LIBBPF_BOOTSTRAP_HDRS_DIR := $(LIBBPF_BOOTSTRAP_INCLUDE)/bpf
LIBBPF_BOOTSTRAP := $(LIBBPF_BOOTSTRAP_OUTPUT)libbpf.a
@@ -44,7 +44,7 @@ $(LIBBPF_OUTPUT) $(BOOTSTRAP_OUTPUT) $(LIBBPF_BOOTSTRAP_OUTPUT) $(LIBBPF_HDRS_DI
$(LIBBPF): $(wildcard $(BPF_DIR)/*.[ch] $(BPF_DIR)/Makefile) | $(LIBBPF_OUTPUT)
$(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(LIBBPF_OUTPUT) \
- DESTDIR=$(LIBBPF_DESTDIR) prefix= $(LIBBPF) install_headers
+ DESTDIR=$(LIBBPF_DESTDIR:/=) prefix= $(LIBBPF) install_headers
$(LIBBPF_INTERNAL_HDRS): $(LIBBPF_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_HDRS_DIR)
$(call QUIET_INSTALL, $@)
@@ -52,7 +52,7 @@ $(LIBBPF_INTERNAL_HDRS): $(LIBBPF_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_HDRS_
$(LIBBPF_BOOTSTRAP): $(wildcard $(BPF_DIR)/*.[ch] $(BPF_DIR)/Makefile) | $(LIBBPF_BOOTSTRAP_OUTPUT)
$(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(LIBBPF_BOOTSTRAP_OUTPUT) \
- DESTDIR=$(LIBBPF_BOOTSTRAP_DESTDIR) prefix= \
+ DESTDIR=$(LIBBPF_BOOTSTRAP_DESTDIR:/=) prefix= \
ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) $@ install_headers
$(LIBBPF_BOOTSTRAP_INTERNAL_HDRS): $(LIBBPF_BOOTSTRAP_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_BOOTSTRAP_HDRS_DIR)
--
2.35.1
On Fri, Feb 25, 2022 at 8:15 AM Yuntao Wang <[email protected]> wrote:
>
> Since the _OUTPUT variable holds a value ending with a trailing slash,
While the change makes sense, I think the description here is not accurate.
Currently, we require OUTPUT to end with trailing slash. However, if
OUTPUT is not defined, _OUTPUT will not hold a trailing slash. Adding
trailing slash to _OUTPUT is one part of this patch, so I think we should not
say that's the reason of this change.
Thanks,
Song
> there is no need to add another one when defining BOOTSTRAP_OUTPUT and
> LIBBPF_OUTPUT variables.
>
> When defining LIBBPF_INCLUDE and LIBBPF_BOOTSTRAP_INCLUDE, we shouldn't
> add an extra slash either for the same reason.
>
> When building libbpf, the value of the DESTDIR argument should also not
> end with a trailing slash.
>
> Signed-off-by: Yuntao Wang <[email protected]>
> ---
> tools/bpf/bpftool/Makefile | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile
> index ba647aede0d6..9800f966fd51 100644
> --- a/tools/bpf/bpftool/Makefile
> +++ b/tools/bpf/bpftool/Makefile
> @@ -18,19 +18,19 @@ BPF_DIR = $(srctree)/tools/lib/bpf
> ifneq ($(OUTPUT),)
> _OUTPUT := $(OUTPUT)
> else
> - _OUTPUT := $(CURDIR)
> + _OUTPUT := $(CURDIR)/
> endif
> -BOOTSTRAP_OUTPUT := $(_OUTPUT)/bootstrap/
> +BOOTSTRAP_OUTPUT := $(_OUTPUT)bootstrap/
>
> -LIBBPF_OUTPUT := $(_OUTPUT)/libbpf/
> +LIBBPF_OUTPUT := $(_OUTPUT)libbpf/
> LIBBPF_DESTDIR := $(LIBBPF_OUTPUT)
> -LIBBPF_INCLUDE := $(LIBBPF_DESTDIR)/include
> +LIBBPF_INCLUDE := $(LIBBPF_DESTDIR)include
> LIBBPF_HDRS_DIR := $(LIBBPF_INCLUDE)/bpf
> LIBBPF := $(LIBBPF_OUTPUT)libbpf.a
>
> LIBBPF_BOOTSTRAP_OUTPUT := $(BOOTSTRAP_OUTPUT)libbpf/
> LIBBPF_BOOTSTRAP_DESTDIR := $(LIBBPF_BOOTSTRAP_OUTPUT)
> -LIBBPF_BOOTSTRAP_INCLUDE := $(LIBBPF_BOOTSTRAP_DESTDIR)/include
> +LIBBPF_BOOTSTRAP_INCLUDE := $(LIBBPF_BOOTSTRAP_DESTDIR)include
> LIBBPF_BOOTSTRAP_HDRS_DIR := $(LIBBPF_BOOTSTRAP_INCLUDE)/bpf
> LIBBPF_BOOTSTRAP := $(LIBBPF_BOOTSTRAP_OUTPUT)libbpf.a
>
> @@ -44,7 +44,7 @@ $(LIBBPF_OUTPUT) $(BOOTSTRAP_OUTPUT) $(LIBBPF_BOOTSTRAP_OUTPUT) $(LIBBPF_HDRS_DI
>
> $(LIBBPF): $(wildcard $(BPF_DIR)/*.[ch] $(BPF_DIR)/Makefile) | $(LIBBPF_OUTPUT)
> $(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(LIBBPF_OUTPUT) \
> - DESTDIR=$(LIBBPF_DESTDIR) prefix= $(LIBBPF) install_headers
> + DESTDIR=$(LIBBPF_DESTDIR:/=) prefix= $(LIBBPF) install_headers
>
> $(LIBBPF_INTERNAL_HDRS): $(LIBBPF_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_HDRS_DIR)
> $(call QUIET_INSTALL, $@)
> @@ -52,7 +52,7 @@ $(LIBBPF_INTERNAL_HDRS): $(LIBBPF_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_HDRS_
>
> $(LIBBPF_BOOTSTRAP): $(wildcard $(BPF_DIR)/*.[ch] $(BPF_DIR)/Makefile) | $(LIBBPF_BOOTSTRAP_OUTPUT)
> $(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(LIBBPF_BOOTSTRAP_OUTPUT) \
> - DESTDIR=$(LIBBPF_BOOTSTRAP_DESTDIR) prefix= \
> + DESTDIR=$(LIBBPF_BOOTSTRAP_DESTDIR:/=) prefix= \
> ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) $@ install_headers
>
> $(LIBBPF_BOOTSTRAP_INTERNAL_HDRS): $(LIBBPF_BOOTSTRAP_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_BOOTSTRAP_HDRS_DIR)
> --
> 2.35.1
>
Because the OUTPUT variable ends with a slash but CURDIR doesn't, to keep
the _OUTPUT value consistent, we add a trailing slash to CURDIR when
defining _OUTPUT variable.
Since the _OUTPUT variable holds a value ending with a trailing slash,
there is no need to add another one when defining BOOTSTRAP_OUTPUT and
LIBBPF_OUTPUT variables.
When defining LIBBPF_INCLUDE and LIBBPF_BOOTSTRAP_INCLUDE, we shouldn't
add an extra slash either for the same reason.
When building libbpf, the value of the DESTDIR argument should also not
end with a trailing slash.
Signed-off-by: Yuntao Wang <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
---
v1 -> v2: make the commit message more accurate
tools/bpf/bpftool/Makefile | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile
index ba647aede0d6..9800f966fd51 100644
--- a/tools/bpf/bpftool/Makefile
+++ b/tools/bpf/bpftool/Makefile
@@ -18,19 +18,19 @@ BPF_DIR = $(srctree)/tools/lib/bpf
ifneq ($(OUTPUT),)
_OUTPUT := $(OUTPUT)
else
- _OUTPUT := $(CURDIR)
+ _OUTPUT := $(CURDIR)/
endif
-BOOTSTRAP_OUTPUT := $(_OUTPUT)/bootstrap/
+BOOTSTRAP_OUTPUT := $(_OUTPUT)bootstrap/
-LIBBPF_OUTPUT := $(_OUTPUT)/libbpf/
+LIBBPF_OUTPUT := $(_OUTPUT)libbpf/
LIBBPF_DESTDIR := $(LIBBPF_OUTPUT)
-LIBBPF_INCLUDE := $(LIBBPF_DESTDIR)/include
+LIBBPF_INCLUDE := $(LIBBPF_DESTDIR)include
LIBBPF_HDRS_DIR := $(LIBBPF_INCLUDE)/bpf
LIBBPF := $(LIBBPF_OUTPUT)libbpf.a
LIBBPF_BOOTSTRAP_OUTPUT := $(BOOTSTRAP_OUTPUT)libbpf/
LIBBPF_BOOTSTRAP_DESTDIR := $(LIBBPF_BOOTSTRAP_OUTPUT)
-LIBBPF_BOOTSTRAP_INCLUDE := $(LIBBPF_BOOTSTRAP_DESTDIR)/include
+LIBBPF_BOOTSTRAP_INCLUDE := $(LIBBPF_BOOTSTRAP_DESTDIR)include
LIBBPF_BOOTSTRAP_HDRS_DIR := $(LIBBPF_BOOTSTRAP_INCLUDE)/bpf
LIBBPF_BOOTSTRAP := $(LIBBPF_BOOTSTRAP_OUTPUT)libbpf.a
@@ -44,7 +44,7 @@ $(LIBBPF_OUTPUT) $(BOOTSTRAP_OUTPUT) $(LIBBPF_BOOTSTRAP_OUTPUT) $(LIBBPF_HDRS_DI
$(LIBBPF): $(wildcard $(BPF_DIR)/*.[ch] $(BPF_DIR)/Makefile) | $(LIBBPF_OUTPUT)
$(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(LIBBPF_OUTPUT) \
- DESTDIR=$(LIBBPF_DESTDIR) prefix= $(LIBBPF) install_headers
+ DESTDIR=$(LIBBPF_DESTDIR:/=) prefix= $(LIBBPF) install_headers
$(LIBBPF_INTERNAL_HDRS): $(LIBBPF_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_HDRS_DIR)
$(call QUIET_INSTALL, $@)
@@ -52,7 +52,7 @@ $(LIBBPF_INTERNAL_HDRS): $(LIBBPF_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_HDRS_
$(LIBBPF_BOOTSTRAP): $(wildcard $(BPF_DIR)/*.[ch] $(BPF_DIR)/Makefile) | $(LIBBPF_BOOTSTRAP_OUTPUT)
$(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(LIBBPF_BOOTSTRAP_OUTPUT) \
- DESTDIR=$(LIBBPF_BOOTSTRAP_DESTDIR) prefix= \
+ DESTDIR=$(LIBBPF_BOOTSTRAP_DESTDIR:/=) prefix= \
ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) $@ install_headers
$(LIBBPF_BOOTSTRAP_INTERNAL_HDRS): $(LIBBPF_BOOTSTRAP_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_BOOTSTRAP_HDRS_DIR)
--
2.35.1
Hello:
This patch was applied to bpf/bpf-next.git (master)
by Daniel Borkmann <[email protected]>:
On Sun, 27 Feb 2022 00:38:15 +0800 you wrote:
> Because the OUTPUT variable ends with a slash but CURDIR doesn't, to keep
> the _OUTPUT value consistent, we add a trailing slash to CURDIR when
> defining _OUTPUT variable.
>
> Since the _OUTPUT variable holds a value ending with a trailing slash,
> there is no need to add another one when defining BOOTSTRAP_OUTPUT and
> LIBBPF_OUTPUT variables.
>
> [...]
Here is the summary with links:
- [bpf-next,v2] bpftool: Remove redundant slashes
https://git.kernel.org/bpf/bpf-next/c/c62dd8a58d19
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html