Since a few boards based on QCoM qmp phy use the
'vdda-max-microamp' & 'vdda-pll-max-microamp' properties to
describe the ufs phy nodes, add them to the dt-bindings doc as well.
This fixes the following '$ make dtbs_check' warning(s):
sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000:
'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of
the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
Cc: Bjorn Andersson <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: Rob Herring <[email protected]>
Signed-off-by: Bhupesh Sharma <[email protected]>
---
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index 48cd6b6171a1..70e7cd75e173 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -87,6 +87,14 @@ properties:
minItems: 1
maxItems: 3
+ vdda-max-microamp:
+ description:
+ Specifies max. load that can be drawn from phy supply.
+
+ vdda-pll-max-microamp:
+ description:
+ Specifies max. load that can be drawn from pll supply.
+
vdda-phy-supply:
description:
Phandle to a regulator supply to PHY core block.
--
2.35.1
On Mon, Feb 28, 2022 at 06:00:13PM +0530, Bhupesh Sharma wrote:
> Since a few boards based on QCoM qmp phy use the
> 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties to
> describe the ufs phy nodes, add them to the dt-bindings doc as well.
Does qmp-phy driver actually use them?
Shawn
>
> This fixes the following '$ make dtbs_check' warning(s):
>
> sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000:
> 'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of
> the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
>
> Cc: Bjorn Andersson <[email protected]>
> Cc: Vinod Koul <[email protected]>
> Cc: Rob Herring <[email protected]>
> Signed-off-by: Bhupesh Sharma <[email protected]>
> ---
> Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> index 48cd6b6171a1..70e7cd75e173 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> @@ -87,6 +87,14 @@ properties:
> minItems: 1
> maxItems: 3
>
> + vdda-max-microamp:
> + description:
> + Specifies max. load that can be drawn from phy supply.
> +
> + vdda-pll-max-microamp:
> + description:
> + Specifies max. load that can be drawn from pll supply.
> +
> vdda-phy-supply:
> description:
> Phandle to a regulator supply to PHY core block.
> --
> 2.35.1
>
On Mon, 28 Feb 2022 18:00:13 +0530, Bhupesh Sharma wrote:
> Since a few boards based on QCoM qmp phy use the
> 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties to
> describe the ufs phy nodes, add them to the dt-bindings doc as well.
>
> This fixes the following '$ make dtbs_check' warning(s):
>
> sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000:
> 'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of
> the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
>
> Cc: Bjorn Andersson <[email protected]>
> Cc: Vinod Koul <[email protected]>
> Cc: Rob Herring <[email protected]>
> Signed-off-by: Bhupesh Sharma <[email protected]>
> ---
> Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
Acked-by: Rob Herring <[email protected]>