The following properties are not supported and causing dtbs_check
warnings.
- vdda-phy-max-microamp
- vdda-pll-max-microamp
- vddp-ref-clk-max-microamp
- vddp-ref-clk-always-on
arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dt.yaml: phy@627000:
'vdda-phy-max-microamp', 'vddp-ref-clk-always-on', 'vddp-ref-clk-max-microamp'
do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
Drop them from QMP PHY nodes for 'msm8996-xiaomi' dts.
Cc: Bjorn Andersson <[email protected]>
Cc: Rob Herring <[email protected]>
Signed-off-by: Bhupesh Sharma <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 5 -----
1 file changed, 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 7a9fcbe9bb31..f6f6b2e89a36 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -337,12 +337,7 @@ &ufsphy {
vdda-phy-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
- vdda-phy-max-microamp = <18380>;
- vdda-pll-max-microamp = <9440>;
-
vddp-ref-clk-supply = <&vreg_l25a_1p2>;
- vddp-ref-clk-max-microamp = <100>;
- vddp-ref-clk-always-on;
};
&venus {
--
2.35.1
On Mon, Feb 28, 2022 at 06:00:14PM +0530, Bhupesh Sharma wrote:
> The following properties are not supported and causing dtbs_check
> warnings.
>
> - vdda-phy-max-microamp
> - vdda-pll-max-microamp
> - vddp-ref-clk-max-microamp
> - vddp-ref-clk-always-on
>
> arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dt.yaml: phy@627000:
> 'vdda-phy-max-microamp', 'vddp-ref-clk-always-on', 'vddp-ref-clk-max-microamp'
> do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
>
> Drop them from QMP PHY nodes for 'msm8996-xiaomi' dts.
>
> Cc: Bjorn Andersson <[email protected]>
> Cc: Rob Herring <[email protected]>
> Signed-off-by: Bhupesh Sharma <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 5 -----
> 1 file changed, 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
> index 7a9fcbe9bb31..f6f6b2e89a36 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
> @@ -337,12 +337,7 @@ &ufsphy {
> vdda-phy-supply = <&vreg_l28a_0p925>;
> vdda-pll-supply = <&vreg_l12a_1p8>;
>
> - vdda-phy-max-microamp = <18380>;
> - vdda-pll-max-microamp = <9440>;
> -
> vddp-ref-clk-supply = <&vreg_l25a_1p2>;
I do not see this is supported by qmp-phy driver. Maybe we should drop
it from bindings and clean up from DTS as well?
Shawn
> - vddp-ref-clk-max-microamp = <100>;
> - vddp-ref-clk-always-on;
> };
>
> &venus {
> --
> 2.35.1
>