Add clock selection code for AST2600. At AST2600 user could
select more than one dispaly timing. Add gfx flags for future
usage.
Signed-off-by: Tommy Haung <[email protected]>
---
drivers/gpu/drm/aspeed/aspeed_gfx.h | 11 +++++++++++
drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c | 14 ++++++++++++++
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 4 ++++
3 files changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
index 4e6a442c3886..eb4c267cde5e 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
@@ -16,6 +16,7 @@ struct aspeed_gfx {
u32 vga_scratch_reg;
u32 throd_val;
u32 scan_line_max;
+ u32 flags;
struct drm_simple_display_pipe pipe;
struct drm_connector connector;
@@ -106,3 +107,13 @@ int aspeed_gfx_create_output(struct drm_device *drm);
/* CRT_THROD */
#define CRT_THROD_LOW(x) (x)
#define CRT_THROD_HIGH(x) ((x) << 8)
+
+/* SCU control */
+#define SCU_G6_CLK_COURCE 0x300
+
+/* GFX FLAGS */
+#define CLK_MASK BIT(0)
+#define CLK_G6 BIT(0)
+
+#define G6_CLK_MASK (BIT(8) | BIT(9) | BIT(10))
+#define G6_USB_40_CLK BIT(9)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
index 827e62c1daba..a24fab22eac4 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
@@ -77,6 +77,18 @@ static void aspeed_gfx_disable_controller(struct aspeed_gfx *priv)
regmap_update_bits(priv->scu, priv->dac_reg, BIT(16), 0);
}
+static void aspeed_gfx_set_clk(struct aspeed_gfx *priv)
+{
+ switch (priv->flags & CLK_MASK) {
+ case CLK_G6:
+ regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK, 0x0);
+ regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK, G6_USB_40_CLK);
+ break;
+ default:
+ break;
+ }
+}
+
static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv)
{
struct drm_display_mode *m = &priv->pipe.crtc.state->adjusted_mode;
@@ -87,6 +99,8 @@ static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv)
if (err)
return;
+ aspeed_gfx_set_clk(priv);
+
#if 0
/* TODO: we have only been able to test with the 40MHz USB clock. The
* clock is fixed, so we cannot adjust it here. */
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index d10246b1d1c2..af56ffdccc65 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -64,6 +64,7 @@ struct aspeed_gfx_config {
u32 vga_scratch_reg; /* VGA scratch register in SCU */
u32 throd_val; /* Default Threshold Seting */
u32 scan_line_max; /* Max memory size of one scan line */
+ u32 gfx_flags; /* Flags for gfx chip caps */
};
static const struct aspeed_gfx_config ast2400_config = {
@@ -72,6 +73,7 @@ static const struct aspeed_gfx_config ast2400_config = {
.vga_scratch_reg = 0x50,
.throd_val = CRT_THROD_LOW(0x1e) | CRT_THROD_HIGH(0x12),
.scan_line_max = 64,
+ .gfx_flags = 0,
};
static const struct aspeed_gfx_config ast2500_config = {
@@ -80,6 +82,7 @@ static const struct aspeed_gfx_config ast2500_config = {
.vga_scratch_reg = 0x50,
.throd_val = CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3c),
.scan_line_max = 128,
+ .gfx_flags = 0,
};
static const struct aspeed_gfx_config ast2600_config = {
@@ -88,6 +91,7 @@ static const struct aspeed_gfx_config ast2600_config = {
.vga_scratch_reg = 0x50,
.throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
.scan_line_max = 128,
+ .gfx_flags = CLK_G6,
};
static const struct of_device_id aspeed_gfx_match[] = {
--
2.17.1