The antenna information is missing in rtl8xxxu and txrate is NULL
in 8188cu and 8192cu. Fill up the missing information for iw
commands.
Chris Chiu (2):
rtl8xxxu: feed antenna information for cfg80211
rtl8xxxu: fill up txrate info for gen1 chips
.../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 75 +++++++++++++++++++
1 file changed, 75 insertions(+)
--
2.20.1
Fill up the available TX/RX antenna so the iw commands can show
correct antenna information for different chips.
Signed-off-by: Chris Chiu <[email protected]>
---
.../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 06d59ffb7444..d225a1257530 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -1607,6 +1607,7 @@ static void rtl8xxxu_print_chipinfo(struct rtl8xxxu_priv *priv)
static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
{
struct device *dev = &priv->udev->dev;
+ struct ieee80211_hw *hw = priv->hw;
u32 val32, bonding;
u16 val16;
@@ -1684,6 +1685,9 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
priv->has_wifi = 1;
}
+ hw->wiphy->available_antennas_tx = BIT(priv->tx_paths) - 1;
+ hw->wiphy->available_antennas_rx = BIT(priv->rx_paths) - 1;
+
switch (priv->rtl_chip) {
case RTL8188E:
case RTL8192E:
@@ -4282,6 +4286,17 @@ static void rtl8xxxu_cam_write(struct rtl8xxxu_priv *priv,
rtl8xxxu_debug = tmp_debug;
}
+static
+int rtl8xxxu_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
+{
+ struct rtl8xxxu_priv *priv = hw->priv;
+
+ *tx_ant = BIT(priv->tx_paths) - 1;
+ *rx_ant = BIT(priv->rx_paths) - 1;
+
+ return 0;
+}
+
static void rtl8xxxu_sw_scan_start(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, const u8 *mac)
{
@@ -6472,6 +6487,7 @@ static const struct ieee80211_ops rtl8xxxu_ops = {
.set_key = rtl8xxxu_set_key,
.ampdu_action = rtl8xxxu_ampdu_action,
.sta_statistics = rtl8xxxu_sta_statistics,
+ .get_antenna = rtl8xxxu_get_antenna,
};
static int rtl8xxxu_parse_usb(struct rtl8xxxu_priv *priv,
--
2.20.1
RTL8188CUS/RTL8192CU(gen1) don't support rate adatptive report hence
no real txrate info can be retrieved. The vendor driver reports the
highest rate in HT capabilities from the IEs to avoid empty txrate.
This commit initiates the txrate information with the highest supported
rate negotiated with AP. The gen2 chip keeps update the txrate from
the rate adaptive reports, and gen1 chips at least have non-NULL txrate
after associated.
Signed-off-by: Chris Chiu <[email protected]>
---
.../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index d225a1257530..285acf303e3d 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4473,6 +4473,35 @@ void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv)
priv->rx_buf_aggregation = 1;
}
+static struct ieee80211_rate rtl8xxxu_legacy_ratetable[] = {
+ {.bitrate = 10, .hw_value = 0x00,},
+ {.bitrate = 20, .hw_value = 0x01,},
+ {.bitrate = 55, .hw_value = 0x02,},
+ {.bitrate = 110, .hw_value = 0x03,},
+ {.bitrate = 60, .hw_value = 0x04,},
+ {.bitrate = 90, .hw_value = 0x05,},
+ {.bitrate = 120, .hw_value = 0x06,},
+ {.bitrate = 180, .hw_value = 0x07,},
+ {.bitrate = 240, .hw_value = 0x08,},
+ {.bitrate = 360, .hw_value = 0x09,},
+ {.bitrate = 480, .hw_value = 0x0a,},
+ {.bitrate = 540, .hw_value = 0x0b,},
+};
+
+static void rtl8xxxu_desc_to_mcsrate(u16 rate, u8 *mcs, u8 *nss)
+{
+ if (rate <= DESC_RATE_54M)
+ return;
+
+ if (rate >= DESC_RATE_MCS0 && rate <= DESC_RATE_MCS15) {
+ if (rate < DESC_RATE_MCS8)
+ *nss = 1;
+ else
+ *nss = 2;
+ *mcs = rate - DESC_RATE_MCS0;
+ }
+}
+
static void rtl8xxxu_set_basic_rates(struct rtl8xxxu_priv *priv, u32 rate_cfg)
{
struct ieee80211_hw *hw = priv->hw;
@@ -4534,9 +4563,12 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct rtl8xxxu_priv *priv = hw->priv;
struct device *dev = &priv->udev->dev;
struct ieee80211_sta *sta;
+ struct rtl8xxxu_ra_report *rarpt;
u32 val32;
u8 val8;
+ rarpt = &priv->ra_report;
+
if (changed & BSS_CHANGED_ASSOC) {
dev_dbg(dev, "Changed ASSOC: %i!\n", bss_conf->assoc);
@@ -4545,6 +4577,10 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
if (bss_conf->assoc) {
u32 ramask;
int sgi = 0;
+ u8 highest_rate;
+ u8 mcs = 0, nss = 0;
+ u32 bit_rate;
+
rcu_read_lock();
sta = ieee80211_find_sta(vif, bss_conf->bssid);
@@ -4569,6 +4605,29 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
sgi = 1;
rcu_read_unlock();
+ highest_rate = fls(ramask) - 1;
+ if (highest_rate < DESC_RATE_MCS0) {
+ rarpt->txrate.legacy =
+ rtl8xxxu_legacy_ratetable[highest_rate].bitrate;
+ } else {
+ rtl8xxxu_desc_to_mcsrate(highest_rate,
+ &mcs, &nss);
+ rarpt->txrate.flags |= RATE_INFO_FLAGS_MCS;
+
+ rarpt->txrate.mcs = mcs;
+ rarpt->txrate.nss = nss;
+
+ if (sgi) {
+ rarpt->txrate.flags |=
+ RATE_INFO_FLAGS_SHORT_GI;
+ }
+
+ rarpt->txrate.bw |= RATE_INFO_BW_20;
+ }
+ bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
+ rarpt->bit_rate = bit_rate;
+ rarpt->desc_rate = highest_rate;
+
priv->vif = vif;
priv->rssi_level = RTL8XXXU_RATR_STA_INIT;
--
2.20.1