LinuxLists.cc - [PATCH v3] Input/i8042: Merge quirk tables and add Clevo devices

2022-03-09 00:01:37

Subject: [PATCH v3] Input/i8042: Merge quirk tables and add Clevo devices

Following a suggestion by Hans de Goede, I reworked the quirk tables in the
i8042 driver. Now all quirks only use a single table. This makes quirks
easier to search by device and reduces code line count and memory usage.

The 2nd patch adds new debug output to make it easy to see if a specific
quirk got applied or not.

The third patch adds a list of Clevo devices that need multiple quirks.
With the reworked table they don't need to be inserted multiple times now,
which was required in v1 and v2 of this patch.

I also included the extra quirk for the Clevo NS7xMU, which was a separate
patch before.

2022-03-09 00:32:18

by Werner Sembach

[permalink] [raw]

Subject: [PATCH v3 3/3] input/i8042: Add TUXEDO/Clevo devices to i8042 quirk tables

A lot of modern Clevo barebones have touchpad and/or keyboard issues after
suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them
have an external PS/2 port so this can safely be set for all of them.

I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use. No negative effects could be
observed when setting all four.

The list is quite massive as neither the TUXEDO nor the Clevo dmi strings
have been very consistent historically. I tried to keep the list as short
as possible without risking on missing an affected device.

This is revision 3. The Clevo N150CU barebone is still removed as it might
have problems with the fix and needs further investigations. The
SchenkerTechnologiesGmbH System-/Board-Vendor string variations are
added. This is now based in the quirk table refactor. This now also
includes the additional noaux flag for the NS7xMU.

Signed-off-by: Werner Sembach <[email protected]>
Cc: [email protected]
---
drivers/input/serio/i8042-x86ia64io.h | 638 ++++++++++++++++++++++++++
1 file changed, 638 insertions(+)

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index e41b0819277c..d9913e502ebf 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -978,6 +978,218 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
},
.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
},
+ /*
+ * A lot of modern Clevo barebones have touchpad and/or keyboard issues
+ * after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
+ * none of them have an external PS/2 port so this can savely be set for
+ * all of them.
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ /*
+ * At least one modern Clevo barebone has the touchpad connected both
+ * via PS/2 and i2c interface. This causes a race condition between the
+ * psmouse and i2c-hid driver. Since the full capability of the touchpad
+ * is available via the i2c interface and the device has no external
+ * PS/2 port, it is save to just ignore all ps2 mouses here to avoid
+ * this issue. The know affected device is the
+ * TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU which comes with one of
+ * the different dmi string combinations below.
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
{
/* OQO Model 01 */
.matches = {
@@ -1023,6 +1235,219 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
},
.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
},
+ /*
+ * A lot of modern Clevo barebones have touchpad and/or keyboard issues
+ * after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
+ * none of them have an external PS/2 port so this can savely be set for
+ * all of them. This is for barebones that have the "Notebook" dmi
+ * String overwritten with "SchenkerTechnologiesGmbH".
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ /*
+ * At least one modern Clevo barebone has the touchpad connected both
+ * via PS/2 and i2c interface. This causes a race condition between the
+ * psmouse and i2c-hid driver. Since the full capability of the touchpad
+ * is available via the i2c interface and the device has no external
+ * PS/2 port, it is save to just ignore all ps2 mouses here to avoid
+ * this issue. The know affected device is the
+ * TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU which comes with one of
+ * the different dmi string combinations below.
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
{
/* Sharp Actius MM20 */
.matches = {
@@ -1095,6 +1520,219 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
},
.driver_data = (void *)(SERIO_QUIRK_NOMUX)
},
+ /*
+ * A lot of modern Clevo barebones have touchpad and/or keyboard issues
+ * after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
+ * none of them have an external PS/2 port so this can savely be set for
+ * all of them. This is for barebones that have the "Notebook" dmi
+ * String overwritten with "TUXEDO".
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ /*
+ * At least one modern Clevo barebone has the touchpad connected both
+ * via PS/2 and i2c interface. This causes a race condition between the
+ * psmouse and i2c-hid driver. Since the full capability of the touchpad
+ * is available via the i2c interface and the device has no external
+ * PS/2 port, it is save to just ignore all ps2 mouses here to avoid
+ * this issue. The know affected device is the
+ * TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU which comes with one of
+ * the different dmi string combinations below.
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
{
/* Mivvy M310 */
.matches = {
--
2.25.1