platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq() for DT users only.
While at it propagate error code in emac_dev_stop() in case
platform_get_irq_optional() fails.
Signed-off-by: Lad Prabhakar <[email protected]>
---
drivers/net/ethernet/ti/davinci_emac.c | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 31df3267a01a..4b6aed78d392 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1604,6 +1604,7 @@ static int emac_dev_stop(struct net_device *ndev)
int irq_num;
struct emac_priv *priv = netdev_priv(ndev);
struct device *emac_dev = &ndev->dev;
+ int ret = 0;
/* inform the upper layers. */
netif_stop_queue(ndev);
@@ -1618,17 +1619,31 @@ static int emac_dev_stop(struct net_device *ndev)
phy_disconnect(ndev->phydev);
/* Free IRQ */
- while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) {
- for (irq_num = res->start; irq_num <= res->end; irq_num++)
- free_irq(irq_num, priv->ndev);
- i++;
+ if (dev_of_node(&priv->pdev->dev)) {
+ do {
+ ret = platform_get_irq_optional(priv->pdev, i);
+ if (ret < 0 && ret != -ENXIO)
+ break;
+ if (ret > 0) {
+ free_irq(ret, priv->ndev);
+ } else {
+ ret = 0;
+ break;
+ }
+ } while (++i);
+ } else {
+ while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) {
+ for (irq_num = res->start; irq_num <= res->end; irq_num++)
+ free_irq(irq_num, priv->ndev);
+ i++;
+ }
}
if (netif_msg_drv(priv))
dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name);
pm_runtime_put(&priv->pdev->dev);
- return 0;
+ return ret;
}
/**
--
2.17.1