2022-03-10 13:06:02

by Oleksij Rempel

[permalink] [raw]
Subject: [PATCH net-next v1 1/4] net: usb: asix: unify ax88772_resume code

The only difference is the reset code, so remove not needed duplicates.

Signed-off-by: Oleksij Rempel <[email protected]>
---
drivers/net/usb/asix.h | 1 +
drivers/net/usb/asix_devices.c | 32 ++++++++------------------------
2 files changed, 9 insertions(+), 24 deletions(-)

diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
index 4334aafab59a..b5ac693cebf2 100644
--- a/drivers/net/usb/asix.h
+++ b/drivers/net/usb/asix.h
@@ -177,6 +177,7 @@ struct asix_rx_fixup_info {
struct asix_common_private {
void (*resume)(struct usbnet *dev);
void (*suspend)(struct usbnet *dev);
+ int (*reset)(struct usbnet *dev, int in_pm);
u16 presvd_phy_advertise;
u16 presvd_phy_bmcr;
struct asix_rx_fixup_info rx_fixup_info;
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 6ea44e53713a..bb09181596c5 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -625,27 +625,13 @@ static void ax88772_resume(struct usbnet *dev)
int i;

for (i = 0; i < 3; i++)
- if (!ax88772_hw_reset(dev, 1))
+ if (!priv->reset(dev, 1))
break;

if (netif_running(dev->net))
phy_start(priv->phydev);
}

-static void ax88772a_resume(struct usbnet *dev)
-{
- struct asix_common_private *priv = dev->driver_priv;
- int i;
-
- for (i = 0; i < 3; i++) {
- if (!ax88772a_hw_reset(dev, 1))
- break;
- }
-
- if (netif_running(dev->net))
- phy_start(priv->phydev);
-}
-
static int asix_resume(struct usb_interface *intf)
{
struct usbnet *dev = usb_get_intfdata(intf);
@@ -763,9 +749,14 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)

chipcode &= AX_CHIPCODE_MASK;

- ret = (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
- ax88772a_hw_reset(dev, 0);
+ priv->resume = ax88772_resume;
+ priv->suspend = ax88772_suspend;
+ if (chipcode == AX_AX88772_CHIPCODE)
+ priv->reset = ax88772_hw_reset;
+ else
+ priv->reset = ax88772a_hw_reset;

+ ret = priv->reset(dev, 0);
if (ret < 0) {
netdev_dbg(dev->net, "Failed to reset AX88772: %d\n", ret);
return ret;
@@ -780,13 +771,6 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)

priv->presvd_phy_bmcr = 0;
priv->presvd_phy_advertise = 0;
- if (chipcode == AX_AX88772_CHIPCODE) {
- priv->resume = ax88772_resume;
- priv->suspend = ax88772_suspend;
- } else {
- priv->resume = ax88772a_resume;
- priv->suspend = ax88772_suspend;
- }

ret = ax88772_init_mdio(dev);
if (ret)
--
2.30.2


2022-03-11 10:36:59

by Oleksij Rempel

[permalink] [raw]
Subject: [PATCH net-next v1 3/4] net: usb: asix: make use of mdiobus_get_phy and phy_connect_direct

In most cases we use own mdio bus, there is no need to create and store
string for the PHY address.

Signed-off-by: Oleksij Rempel <[email protected]>
---
drivers/net/usb/asix.h | 1 -
drivers/net/usb/asix_devices.c | 19 ++++++++++---------
2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
index 691f37f45238..072760d76a72 100644
--- a/drivers/net/usb/asix.h
+++ b/drivers/net/usb/asix.h
@@ -184,7 +184,6 @@ struct asix_common_private {
struct mii_bus *mdio;
struct phy_device *phydev;
u16 phy_addr;
- char phy_name[20];
bool embd_phy;
u8 chipcode;
};
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 34622c1adacf..fb617eb551bb 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -661,15 +661,16 @@ static int ax88772_init_phy(struct usbnet *dev)
struct asix_common_private *priv = dev->driver_priv;
int ret;

- snprintf(priv->phy_name, sizeof(priv->phy_name), PHY_ID_FMT,
- priv->mdio->id, priv->phy_addr);
-
- priv->phydev = phy_connect(dev->net, priv->phy_name, &asix_adjust_link,
- PHY_INTERFACE_MODE_INTERNAL);
- if (IS_ERR(priv->phydev)) {
- netdev_err(dev->net, "Could not connect to PHY device %s\n",
- priv->phy_name);
- ret = PTR_ERR(priv->phydev);
+ priv->phydev = mdiobus_get_phy(priv->mdio, priv->phy_addr);
+ if (!priv->phydev) {
+ netdev_err(dev->net, "Could not find PHY\n");
+ return -ENODEV;
+ }
+
+ ret = phy_connect_direct(dev->net, priv->phydev, &asix_adjust_link,
+ PHY_INTERFACE_MODE_INTERNAL);
+ if (ret) {
+ netdev_err(dev->net, "Could not connect PHY\n");
return ret;
}

--
2.30.2

2022-03-11 22:01:57

by Oleksij Rempel

[permalink] [raw]
Subject: [PATCH net-next v1 2/4] net: usb: asix: store chipid to avoid reading it on reset

We already read chipid on probe. There is no need to read it on reset.

Signed-off-by: Oleksij Rempel <[email protected]>
---
drivers/net/usb/asix.h | 1 +
drivers/net/usb/asix_devices.c | 19 +++++++------------
2 files changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
index b5ac693cebf2..691f37f45238 100644
--- a/drivers/net/usb/asix.h
+++ b/drivers/net/usb/asix.h
@@ -186,6 +186,7 @@ struct asix_common_private {
u16 phy_addr;
char phy_name[20];
bool embd_phy;
+ u8 chipcode;
};

extern const struct driver_info ax88172a_info;
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index bb09181596c5..34622c1adacf 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -450,7 +450,6 @@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
struct asix_data *data = (struct asix_data *)&dev->data;
struct asix_common_private *priv = dev->driver_priv;
u16 rx_ctl, phy14h, phy15h, phy16h;
- u8 chipcode = 0;
int ret;

ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
@@ -493,12 +492,7 @@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
goto out;
}

- ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0,
- 0, 1, &chipcode, in_pm);
- if (ret < 0)
- goto out;
-
- if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772B_CHIPCODE) {
+ if (priv->chipcode == AX_AX88772B_CHIPCODE) {
ret = asix_write_cmd(dev, AX_QCTCTRL, 0x8000, 0x8001,
0, NULL, in_pm);
if (ret < 0) {
@@ -506,7 +500,7 @@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
ret);
goto out;
}
- } else if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772A_CHIPCODE) {
+ } else if (priv->chipcode == AX_AX88772A_CHIPCODE) {
/* Check if the PHY registers have default settings */
phy14h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
AX88772A_PHY14H);
@@ -689,8 +683,8 @@ static int ax88772_init_phy(struct usbnet *dev)

static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
{
- u8 buf[ETH_ALEN] = {0}, chipcode = 0;
struct asix_common_private *priv;
+ u8 buf[ETH_ALEN] = {0};
int ret, i;

priv = devm_kzalloc(&dev->udev->dev, sizeof(*priv), GFP_KERNEL);
@@ -741,17 +735,18 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
priv->phy_addr = ret;
priv->embd_phy = ((priv->phy_addr & 0x1f) == 0x10);

- ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
+ ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1,
+ &priv->chipcode, 0);
if (ret < 0) {
netdev_dbg(dev->net, "Failed to read STATMNGSTS_REG: %d\n", ret);
return ret;
}

- chipcode &= AX_CHIPCODE_MASK;
+ priv->chipcode &= AX_CHIPCODE_MASK;

priv->resume = ax88772_resume;
priv->suspend = ax88772_suspend;
- if (chipcode == AX_AX88772_CHIPCODE)
+ if (priv->chipcode == AX_AX88772_CHIPCODE)
priv->reset = ax88772_hw_reset;
else
priv->reset = ax88772a_hw_reset;
--
2.30.2