The MDIO controller has support to release the internal PHYs from reset
by specifying a second memory resource. This is different between the
currently supported SparX-5 and the LAN966x. Add a new compatible to
distiguish between these two.
Signed-off-by: Michael Walle <[email protected]>
---
Documentation/devicetree/bindings/net/mscc-miim.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/mscc-miim.txt b/Documentation/devicetree/bindings/net/mscc-miim.txt
index 7104679cf59d..a9efff252ca6 100644
--- a/Documentation/devicetree/bindings/net/mscc-miim.txt
+++ b/Documentation/devicetree/bindings/net/mscc-miim.txt
@@ -2,7 +2,7 @@ Microsemi MII Management Controller (MIIM) / MDIO
=================================================
Properties:
-- compatible: must be "mscc,ocelot-miim"
+- compatible: must be "mscc,ocelot-miim" or "mscc,lan966x-miim"
- reg: The base address of the MDIO bus controller register bank. Optionally, a
second register bank can be defined if there is an associated reset register
for internal PHYs
--
2.30.2