Add support for Toradex Aster, small form-factor with header compatible
with Arduino Uno and Raspberry Pi (RPi) maker boards.
Additional detail available at
https://www.toradex.com/products/carrier-boards/aster-carrier-board
Signed-off-by: Max Krummenacher <[email protected]>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6dl-colibri-aster.dts | 113 +++++++++++++++++++++
2 files changed, 114 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6dl-colibri-aster.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b636bae2b281..4802c8b0ee1a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -452,6 +452,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-aristainetos_7.dtb \
imx6dl-aristainetos2_4.dtb \
imx6dl-aristainetos2_7.dtb \
+ imx6dl-colibri-aster.dtb \
imx6dl-colibri-eval-v3.dtb \
imx6dl-colibri-iris.dtb \
imx6dl-colibri-iris-v2.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/imx6dl-colibri-aster.dts
new file mode 100644
index 000000000000..74e8a6cd8bed
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-aster.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX6DL/S on Colibri Aster Board";
+ compatible = "toradex,colibri_imx6dl-aster", "toradex,colibri_imx6dl",
+ "fsl,imx6dl";
+
+ aliases {
+ i2c0 = &i2c2;
+ i2c1 = &i2c3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+/* Colibri SSP */
+&ecspi4 {
+ cs-gpios = <
+ &gpio5 2 GPIO_ACTIVE_HIGH
+ &gpio5 4 GPIO_ACTIVE_HIGH
+ >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi4 &pinctrl_csi_gpio_2>;
+ status = "okay";
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c3 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &pinctrl_csi_gpio_1
+ &pinctrl_gpio_2
+ &pinctrl_gpio_aster
+ &pinctrl_usbh_oc_1
+ &pinctrl_usbc_id_1
+ &pinctrl_weim_gpio_5
+ >;
+
+ pinctrl_gpio_aster: gpioaster {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
+ >;
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+®_usb_host_vbus {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_host_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+ status = "okay";
+};
--
2.20.1