Add support for the ChromeOS Embedded Controller present on the Asurada
platform. It is connected through the SPI1 bus and offers several
functionalities: base detection, PWM controller, I2C tunneling,
regulators, Type-C connector management, keyboard and Smart Battery
Metrics (SBS).
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
.../boot/dts/mediatek/mt8192-asurada.dtsi | 79 +++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index 3c5b1e475cf6..bd2730ab6266 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -353,6 +353,14 @@ &pio {
"AUD_DAT_MISO0",
"AUD_DAT_MISO1";
+ cros_ec_int: cros-ec-irq-default-pins {
+ pins-ec-ap-int-odl {
+ pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
i2c0_pins: i2c0-default-pins {
pins-bus {
pinmux = <PINMUX_GPIO204__FUNC_SCL0>,
@@ -432,6 +440,74 @@ &spi1 {
mediatek,pad-select = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>;
+
+ cros_ec: ec@0 {
+ compatible = "google,cros-ec-spi";
+ reg = <0>;
+ interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
+ spi-max-frequency = <3000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cros_ec_int>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ base_detection: cbas {
+ compatible = "google,cros-cbas";
+ };
+
+ cros_ec_pwm: ec-pwm {
+ compatible = "google,cros-ec-pwm";
+ #pwm-cells = <1>;
+
+ status = "disabled";
+ };
+
+ i2c_tunnel: i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ google,remote-bus = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mt6360_ldo3_reg: regulator@0 {
+ compatible = "google,cros-ec-regulator";
+ reg = <0>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ mt6360_ldo5_reg: regulator@1 {
+ compatible = "google,cros-ec-regulator";
+ reg = <1>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ typec {
+ compatible = "google,cros-ec-typec";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_c0: connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ label = "left";
+ power-role = "dual";
+ data-role = "host";
+ try-power-role = "source";
+ };
+
+ usb_c1: connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ label = "right";
+ power-role = "dual";
+ data-role = "host";
+ try-power-role = "source";
+ };
+ };
+ };
};
&spi5 {
@@ -446,3 +522,6 @@ &spi5 {
&uart0 {
status = "okay";
};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
--
2.35.1