2022-02-28 12:04:03

by Tudor Ambarus

Subject: [PATCH v2 5/8] mtd: spi-nor: manufacturers: Use spi_nor_read_id() core method

Use spi_nor_read_id() core method to avoid duplication of code. Now the ID
is read on the full SPI_NOR_MAX_ID_LEN instead of
round_up(nor->info->id_len, 2), but it doesn't harm to read more ID bytes,
so the change comes with no secondary effects.

Signed-off-by: Tudor Ambarus <[email protected]>
---
drivers/mtd/spi-nor/micron-st.c | 13 +++----------
drivers/mtd/spi-nor/spansion.c | 13 +++----------
2 files changed, 6 insertions(+), 20 deletions(-)

diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index 8a20475ce77a..41b87868ecf9 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -91,17 +91,10 @@ static int micron_st_nor_octal_dtr_enable(struct spi_nor *nor, bool enable)
return ret;

/* Read flash ID to make sure the switch was successful. */
- op = (struct spi_mem_op)
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_DUMMY(enable ? 8 : 0, 1),
- SPI_MEM_OP_DATA_IN(round_up(nor->info->id_len, 2),
- buf, 1));
-
if (enable)
- spi_nor_spimem_setup_op(nor, &op, SNOR_PROTO_8_8_8_DTR);
-
- ret = spi_mem_exec_op(nor->spimem, &op);
+ ret = spi_nor_read_id(nor, 0, 8, buf, SNOR_PROTO_8_8_8_DTR);
+ else
+ ret = spi_nor_read_id(nor, 0, 0, buf, SNOR_PROTO_1_1_1);
if (ret)
return ret;

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index f24e546e04a5..c5988312cc91 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -98,17 +98,10 @@ static int cypress_nor_octal_dtr_enable(struct spi_nor *nor, bool enable)
return ret;

/* Read flash ID to make sure the switch was successful. */
- op = (struct spi_mem_op)
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1),
- SPI_MEM_OP_ADDR(enable ? 4 : 0, 0, 1),
- SPI_MEM_OP_DUMMY(enable ? 3 : 0, 1),
- SPI_MEM_OP_DATA_IN(round_up(nor->info->id_len, 2),
- buf, 1));
-
if (enable)
- spi_nor_spimem_setup_op(nor, &op, SNOR_PROTO_8_8_8_DTR);
-
- ret = spi_mem_exec_op(nor->spimem, &op);
+ ret = spi_nor_read_id(nor, 4, 3, buf, SNOR_PROTO_8_8_8_DTR);
+ else
+ ret = spi_nor_read_id(nor, 0, 0, buf, SNOR_PROTO_1_1_1);
if (ret)
return ret;

--
2.25.1

2022-03-21 22:58:11

by Pratyush Yadav

Subject: Re: [PATCH v2 5/8] mtd: spi-nor: manufacturers: Use spi_nor_read_id() core method

On 28/02/22 01:17PM, Tudor Ambarus wrote:
> Use spi_nor_read_id() core method to avoid duplication of code. Now the ID
> is read on the full SPI_NOR_MAX_ID_LEN instead of
> round_up(nor->info->id_len, 2), but it doesn't harm to read more ID bytes,
> so the change comes with no secondary effects.
>
> Signed-off-by: Tudor Ambarus <[email protected]>

Reviewed-by: Pratyush Yadav <[email protected]>

--
Regards,
Pratyush Yadav
Texas Instruments Inc.