Hi Allen,
On Tue, Mar 22, 2022 at 08:28:45PM +0800, Allen-KH Cheng wrote:
> 1. Set SCP cache size before loading SCP FW. (8KB+8KB)
> 2. Adjust ipi_buf_offset from 0x7bdb0 to 0x3BDB0 for enableing cache
>
> SCP side
> - IPI Buffer: 0x3BDB0 <-> 0x3C000
> - Cache: 0x3C000 <-> 0x40000
>
I would also like to find in this changelog "why" this patch is needed and more
importantly, how it remains compatible with existing implementation. I am
mostly worried about implemenations where the application processor is using
caches while the SCP is not.
I will also need a couple of "Tested-by" tags before moving forward with this
patch.
Thanks,
Mathieu
> Signed-off-by: Allen-KH Cheng <[email protected]>
> ---
> drivers/remoteproc/mtk_scp.c | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
> index 38609153bf64..24065b6b4da8 100644
> --- a/drivers/remoteproc/mtk_scp.c
> +++ b/drivers/remoteproc/mtk_scp.c
> @@ -401,6 +401,14 @@ static int mt8186_scp_before_load(struct mtk_scp *scp)
> writel(0x0, scp->reg_base + MT8186_SCP_L1_SRAM_PD_P1);
> writel(0x0, scp->reg_base + MT8186_SCP_L1_SRAM_PD_p2);
>
> + /*
> + * Set I-cache and D-cache size before loading SCP FW.
> + * SCP SRAM logical address may change when cache size setting differs.
> + */
> + writel(MT8183_SCP_CACHE_CON_WAYEN | MT8183_SCP_CACHESIZE_8KB,
> + scp->reg_base + MT8183_SCP_CACHE_CON);
> + writel(MT8183_SCP_CACHESIZE_8KB, scp->reg_base + MT8183_SCP_DCACHE_CON);
> +
> return 0;
> }
>
> @@ -905,7 +913,7 @@ static const struct mtk_scp_of_data mt8186_of_data = {
> .scp_da_to_va = mt8183_scp_da_to_va,
> .host_to_scp_reg = MT8183_HOST_TO_SCP,
> .host_to_scp_int_bit = MT8183_HOST_IPC_INT_BIT,
> - .ipi_buf_offset = 0x7bdb0,
> + .ipi_buf_offset = 0x3bdb0,
> };
>
> static const struct mtk_scp_of_data mt8192_of_data = {
> --
> 2.18.0
>