From: Peng Li <[email protected]>
After disable sriov, VF still has some config and info need to be
cleaned, which configured by PF. This patch clean the HW config
and SW struct vport->vf_info.
Fixes: fa8d82e853e8 ("net: hns3: Add support of .sriov_configure in HNS3 driver")
Signed-off-by: Peng Li<[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 3 ++
.../net/ethernet/hisilicon/hns3/hns3_enet.c | 18 +++++++
.../hisilicon/hns3/hns3pf/hclge_main.c | 50 +++++++++++++++++++
3 files changed, 71 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index 6f18c9a03231..d44dd7091fa1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -537,6 +537,8 @@ struct hnae3_ae_dev {
* Get 1588 rx hwstamp
* get_ts_info
* Get phc info
+ * clean_vf_config
+ * Clean residual vf info after disable sriov
*/
struct hnae3_ae_ops {
int (*init_ae_dev)(struct hnae3_ae_dev *ae_dev);
@@ -730,6 +732,7 @@ struct hnae3_ae_ops {
struct ethtool_ts_info *info);
int (*get_link_diagnosis_info)(struct hnae3_handle *handle,
u32 *status_code);
+ void (*clean_vf_config)(struct hnae3_ae_dev *ae_dev, int num_vfs);
};
struct hnae3_dcb_ops {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 530ba8bef503..14dc12c2155d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -3060,6 +3060,21 @@ static int hns3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return ret;
}
+/**
+ * hns3_clean_vf_config
+ * @pdev: pointer to a pci_dev structure
+ * @num_vfs: number of VFs allocated
+ *
+ * Clean residual vf config after disable sriov
+ **/
+static void hns3_clean_vf_config(struct pci_dev *pdev, int num_vfs)
+{
+ struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev);
+
+ if (ae_dev->ops->clean_vf_config)
+ ae_dev->ops->clean_vf_config(ae_dev, num_vfs);
+}
+
/* hns3_remove - Device removal routine
* @pdev: PCI device information struct
*/
@@ -3098,7 +3113,10 @@ static int hns3_pci_sriov_configure(struct pci_dev *pdev, int num_vfs)
else
return num_vfs;
} else if (!pci_vfs_assigned(pdev)) {
+ int num_vfs_pre = pci_num_vf(pdev);
+
pci_disable_sriov(pdev);
+ hns3_clean_vf_config(pdev, num_vfs_pre);
} else {
dev_warn(&pdev->dev,
"Unable to free VFs because some are assigned to VMs.\n");
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 279a1771fe7c..2a5e6a241d52 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -12724,6 +12724,55 @@ static int hclge_get_link_diagnosis_info(struct hnae3_handle *handle,
return 0;
}
+/* After disable sriov, VF still has some config and info need clean,
+ * which configed by PF.
+ */
+static void hclge_clear_vport_vf_info(struct hclge_vport *vport, int vfid)
+{
+ struct hclge_dev *hdev = vport->back;
+ struct hclge_vlan_info vlan_info;
+ int ret;
+
+ /* after disable sriov, clean VF rate configured by PF */
+ ret = hclge_tm_qs_shaper_cfg(vport, 0);
+ if (ret)
+ dev_err(&hdev->pdev->dev,
+ "failed to clean vf%d rate config, ret = %d\n",
+ vfid, ret);
+
+ vlan_info.vlan_tag = 0;
+ vlan_info.qos = 0;
+ vlan_info.vlan_proto = ETH_P_8021Q;
+ ret = hclge_update_port_base_vlan_cfg(vport,
+ HNAE3_PORT_BASE_VLAN_DISABLE,
+ &vlan_info);
+ if (ret)
+ dev_err(&hdev->pdev->dev,
+ "failed to clean vf%d port base vlan, ret = %d\n",
+ vfid, ret);
+
+ ret = hclge_set_vf_spoofchk_hw(hdev, vport->vport_id, false);
+ if (ret)
+ dev_err(&hdev->pdev->dev,
+ "failed to clean vf%d spoof config, ret = %d\n",
+ vfid, ret);
+
+ memset(&vport->vf_info, 0, sizeof(vport->vf_info));
+}
+
+static void hclge_clean_vport_config(struct hnae3_ae_dev *ae_dev, int num_vfs)
+{
+ struct hclge_dev *hdev = ae_dev->priv;
+ struct hclge_vport *vport;
+ int i;
+
+ for (i = 0; i < num_vfs; i++) {
+ vport = &hdev->vport[i + HCLGE_VF_VPORT_START_NUM];
+
+ hclge_clear_vport_vf_info(vport, i);
+ }
+}
+
static const struct hnae3_ae_ops hclge_ops = {
.init_ae_dev = hclge_init_ae_dev,
.uninit_ae_dev = hclge_uninit_ae_dev,
@@ -12825,6 +12874,7 @@ static const struct hnae3_ae_ops hclge_ops = {
.get_rx_hwts = hclge_ptp_get_rx_hwts,
.get_ts_info = hclge_ptp_get_ts_info,
.get_link_diagnosis_info = hclge_get_link_diagnosis_info,
+ .clean_vf_config = hclge_clean_vport_config,
};
static struct hnae3_ae_algo ae_algo = {
--
2.33.0