Convert rockchip,rk3036-cru.txt to YAML.
Changes against original bindings:
Add clocks and clock-names because the device has to have
at least one input clock.
Signed-off-by: Johan Jonker <[email protected]>
---
.../bindings/clock/rockchip,rk3036-cru.txt | 56 ---------------
.../bindings/clock/rockchip,rk3036-cru.yaml | 72 +++++++++++++++++++
2 files changed, 72 insertions(+), 56 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
deleted file mode 100644
index 20df350b9..000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Rockchip RK3036 Clock and Reset Unit
-
-The RK3036 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3036-cru"
-- reg: physical base address of the controller and length of memory mapped
- region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
- If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "rmii_clkin" - external EMAC clock - optional
-
-Example: Clock controller node:
-
- cru: cru@20000000 {
- compatible = "rockchip,rk3036-cru";
- reg = <0x20000000 0x1000>;
- rockchip,grf = <&grf>;
-
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
-Example: UART controller node that consumes the clock generated by the clock
- controller:
-
- uart0: serial@20060000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x20060000 0x100>;
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&cru SCLK_UART0>;
- };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
new file mode 100644
index 000000000..1376230fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3036-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3036 Clock and Reset Unit (CRU)
+
+maintainers:
+ - Elaine Zhang <[email protected]>
+ - Heiko Stuebner <[email protected]>
+
+description: |
+ The RK3036 clock controller generates and supplies clocks to various
+ controllers within the SoC and also implements a reset controller for SoC
+ peripherals.
+ Each clock is assigned an identifier and client nodes can use this identifier
+ to specify the clock which they consume. All available clocks are defined as
+ preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
+ used in device tree sources. Similar macros exist for the reset sources in
+ these files.
+ There are several clocks that are generated outside the SoC. It is expected
+ that they are defined using standard clock bindings with following
+ clock-output-names:
+ - "xin24m" - crystal input - required
+ - "ext_i2s" - external I2S clock - optional
+ - "rmii_clkin" - external EMAC clock - optional
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk3036-cru
+
+ reg:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: xin24m
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the "general register files" (GRF),
+ if missing pll rates are not changeable, due to the missing pll
+ lock status.
+
+required:
+ - compatible
+ - reg
+ - "#clock-cells"
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ cru: clock-controller@20000000 {
+ compatible = "rockchip,rk3036-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
--
2.20.1
On 30/03/2022 13:48, Johan Jonker wrote:
> Convert rockchip,rk3036-cru.txt to YAML.
>
> Changes against original bindings:
> Add clocks and clock-names because the device has to have
> at least one input clock.
>
> Signed-off-by: Johan Jonker <[email protected]>
> ---
> .../bindings/clock/rockchip,rk3036-cru.txt | 56 ---------------
> .../bindings/clock/rockchip,rk3036-cru.yaml | 72 +++++++++++++++++++
> 2 files changed, 72 insertions(+), 56 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
> create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On Wed, 30 Mar 2022 13:48:45 +0200, Johan Jonker wrote:
> Convert rockchip,rk3036-cru.txt to YAML.
>
> Changes against original bindings:
> Add clocks and clock-names because the device has to have
> at least one input clock.
Applied, thanks!
[1/3] dt-bindings: clock: convert rockchip,rk3036-cru.txt to YAML
commit: de55d1639067b9dd4986bb4885c41867d085defa
[2/3] ARM: dts: rockchip: add clocks property to cru node rk3036
commit: b35fd1af63ffbad76292495d0fd0deefba414a85
Best regards,
--
Heiko Stuebner <[email protected]>