Introduce MDIO bus frequency support. This way the board can have a
faster (or maybe slower) bus frequency than the hardware default.
changes since v1:
- fail probe if clock-frequency is set, but not clock is given
- rename clk_freq to bus_freq
- add maxItems to interrupts property
- put compatible and reg first in the example
Michael Walle (3):
dt-bindings: net: convert mscc-miim to YAML format
dt-bindings: net: mscc-miim: add clock and clock-frequency
net: phy: mscc-miim: add support to set MDIO bus frequency
.../devicetree/bindings/net/mscc,miim.yaml | 61 +++++++++++++++++++
.../devicetree/bindings/net/mscc-miim.txt | 26 --------
drivers/net/mdio/mdio-mscc-miim.c | 58 +++++++++++++++++-
3 files changed, 117 insertions(+), 28 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/mscc,miim.yaml
delete mode 100644 Documentation/devicetree/bindings/net/mscc-miim.txt
--
2.30.2