2022-04-04 04:52:10

by Kuldeep Singh

[permalink] [raw]
Subject: Re: [PATCH 1/5] dt-bindings: i2c: Add Qualcomm Geni based QUP i2c bindings

On Sat, Apr 02, 2022 at 08:24:25PM +0200, Krzysztof Kozlowski wrote:
> On 02/04/2022 07:12, Kuldeep Singh wrote:
> > GENI(generic interface) based Qualcomm Universal Peripheral controller
> > can support multiple serial interfaces like spi,uart and i2c.
> >
>
> Few more comments.
>
> (...)
>
> > +
> > + clock-frequency:
> > + description: Desired I2C bus clock frequency in Hz
>
> Skip description, it's common for I2C controllers.

ok.

>
> > + default: 100000
> > +
> > + interconnects:
> > + maxItems: 3
> > +
> > + interconnect-names:
> > + items:
> > + - const: qup-core
> > + - const: qup-config
> > + - const: qup-memory
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + required-opps:
> > + maxItems: 1
> > +
> > + dmas:
> > + maxItems: 2
> > +
> > + dma-names:
> > + items:
> > + - const: tx
> > + - const: rx
> > +
> > + pinctrl-0: true
> > + pinctrl-1: true
> > +
> > + pinctrl-names:
> > + minItems: 1
> > + items:
> > + - const: default
> > + - const: sleep
> > +
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 0
>
> These are not needed, they come from schema.

Yes. I will update in v2. Thanks!

-Kuldeep