On Sat, Apr 02, 2022 at 02:29:59PM +0200, Krzysztof Kozlowski wrote:
> On 02/04/2022 07:12, Kuldeep Singh wrote:
> > GENI(generic interface) based Qualcomm Universal Peripheral controller
> > can support multiple serial interfaces like spi,uart and i2c.
> >
> > Unlike other i2c controllers, QUP i2c bindings are present in parent
> > schema. Move it out from parent to an individual binding and let parent
> > refer to child schema later on.
> >
> > Please note, current schema isn't complete as it misses out few
> > properties and thus, add these missing properties along the process.
> >
> > Signed-off-by: Kuldeep Singh <[email protected]>
> > ---
> > .../bindings/i2c/qcom,i2c-geni-qcom.yaml | 110 ++++++++++++++++++
> > 1 file changed, 110 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> > new file mode 100644
> > index 000000000000..01a02e680ea3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> > @@ -0,0 +1,110 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: Qualcomm Geni based QUP I2C Controller
> > +
> > +maintainers:
> > + - Andy Gross <[email protected]>
> > + - Bjorn Andersson <[email protected]>
> > +
> > +allOf:
> > + - $ref: /schemas/i2c/i2c-controller.yaml#
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - qcom,geni-i2c
>
> Just const, no enum. There are no other flavors of this (unless you
> think there are?).
There are no other users. Will change it to const.
>
> > +
> > + clocks:
> > + maxItems: 1
> > +
> > + clock-names:
> > + const: se
> > +
> > + clock-frequency:
> > + description: Desired I2C bus clock frequency in Hz
> > + default: 100000
> > +
> > + interconnects:
> > + maxItems: 3
> > +
> > + interconnect-names:
> > + items:
> > + - const: qup-core
> > + - const: qup-config
> > + - const: qup-memory
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + required-opps:
> > + maxItems: 1
>
> I have doubts this is correct property. Usually it is part of the
> opp-table. I see sc7180 needs this, but I think it is a mistake. Do you
> know how it is supposed to work?
Not sure how exactly it works. I took reference from
Documentation/devicetree/bindings/clock/qcom,videocc.yaml on how to add
required-opps.
-Kuldeep
On 02/04/2022 21:44, Kuldeep Singh wrote:
> On Sat, Apr 02, 2022 at 02:29:59PM +0200, Krzysztof Kozlowski wrote:
>> On 02/04/2022 07:12, Kuldeep Singh wrote:
>>> GENI(generic interface) based Qualcomm Universal Peripheral controller
>>> can support multiple serial interfaces like spi,uart and i2c.
>>>
>>> +
>>> + power-domains:
>>> + maxItems: 1
>>> +
>>> + reg:
>>> + maxItems: 1
>>> +
>>> + required-opps:
>>> + maxItems: 1
>>
>> I have doubts this is correct property. Usually it is part of the
>> opp-table. I see sc7180 needs this, but I think it is a mistake. Do you
>> know how it is supposed to work?
>
> Not sure how exactly it works. I took reference from
> Documentation/devicetree/bindings/clock/qcom,videocc.yaml on how to add
> required-opps.
>
I see now that power domains consumer bindings also mention it:
Documentation/devicetree/bindings/power/power_domain.txt
and it might be actually used via __genpd_dev_pm_attach().
Let's keep it then.
Best regards,
Krzysztof