Add missing nodes for the flexcom blocks and a node for the SGPIO
block. Then add basic support for the Kontron KSwitch D10.
Microchip, please take a closer look at the compatible strings of
the newly added nodes.
changes since v2:
- add second kontron board variant and moved common stuff into a
new dtsi
- moved the uart/i2c nodes inside of the flexcom node
- moved sgpio child nodes inside of the sgpio node
changes since v1:
- fixed indendation
- keep compatible, reg first, move #address-cells and #size-cells
towards the end
Michael Walle (7):
ARM: dts: lan966x: swap dma channels for crypto node
ARM: dts: lan966x: add sgpio node
ARM: dts: lan966x: add missing uart DMA channel
ARM: dts: lan966x: add all flexcom usart nodes
ARM: dts: lan966x: add flexcom SPI nodes
ARM: dts: lan966x: add flexcom I2C nodes
ARM: dts: lan966x: add basic Kontron KSwitch D10 support
arch/arm/boot/dts/Makefile | 4 +-
...lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts | 77 ++++++
.../lan966x-kontron-kswitch-d10-mmt-8g.dts | 13 +
.../dts/lan966x-kontron-kswitch-d10-mmt.dtsi | 75 ++++++
arch/arm/boot/dts/lan966x.dtsi | 227 +++++++++++++++++-
5 files changed, 392 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
create mode 100644 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
create mode 100644 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
--
2.30.2