Some appliances of ktd2692 don't have the AUX pin connected to
a GPIO. Specifically, Samsung Galaxy J5 (2015), which uses ktd2692
for driving the front flash LED, has the pin not connected anywhere on
schematics. Make specifying the AUX pin optional, since it is additional
functionality and only affects amount of current going through the LED.
Also convert the txt device-tree bindings to yaml and pick up maintainership
over the yaml binding and the driver itself.
Markuss Broks (2):
dt-bindings: leds: convert ktd2692 bindings to yaml
leds: ktd2692: Make aux-gpios optional
.../bindings/leds/kinetic,ktd2692.yaml | 87 +++++++++++++++++++
.../devicetree/bindings/leds/leds-ktd2692.txt | 50 -----------
MAINTAINERS | 6 ++
drivers/leds/flash/leds-ktd2692.c | 18 ++--
4 files changed, 103 insertions(+), 58 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
delete mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
--
2.35.1
This patch converts the leds-ktd2692.txt bindings to modern yaml
style device-tree bindings.
Signed-off-by: Markuss Broks <[email protected]>
---
.../bindings/leds/kinetic,ktd2692.yaml | 87 +++++++++++++++++++
.../devicetree/bindings/leds/leds-ktd2692.txt | 50 -----------
2 files changed, 87 insertions(+), 50 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
delete mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
diff --git a/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
new file mode 100644
index 000000000000..e9058316a5ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/kinetic,ktd2692.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: KTD2692 Flash LED Driver from Kinetic Technologies
+
+maintainers:
+ - Markuss Broks <[email protected]>
+
+description: |
+ KTD2692 is the ideal power solution for high-power flash LEDs.
+ It uses ExpressWire single-wire programming for maximum flexibility.
+
+ The ExpressWire interface through CTRL pin can control LED on/off and
+ enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
+ Flash timeout, LVP(low voltage protection).
+
+ Also, When the AUX pin is pulled high while CTRL pin is high,
+ LED current will be ramped up to the flash-mode current level.
+
+properties:
+ compatible:
+ const: kinetic,ktd2692
+
+ ctrl-gpios:
+ maxItems: 1
+ description: Specifier of the GPIO connected to CTRL pin.
+
+ aux-gpios:
+ maxItems: 1
+ description: Specifier of the GPIO connected to CTRL pin.
+
+ vin-supply:
+ maxItems: 1
+ description: "vin" LED supply (2.7V to 5.5V).
+
+ led:
+ type: object
+ $ref: common.yaml#
+ description: Properties for the LED.
+ properties:
+ function: true
+ color: true
+ flash-max-timeout-us:
+ description: Flash LED maximum timeout.
+
+ led-max-microamp:
+ maximum: 300000
+ description: Minimum Threshold for Timer protection
+ is defined internally (Maximum 300mA).
+
+ flash-max-microamp:
+ description: Flash LED maximum current
+ Formula - I(mA) = 15000 / Rset.
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - ctrl-gpios
+ - led
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+
+ ktd2692 {
+ compatible = "kinetic,ktd2692";
+ ctrl-gpios = <&gpc0 1 0>;
+ aux-gpios = <&gpc0 2 0>;
+ vin-supply = <&vbat>;
+
+ led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ flash-max-timeout-us = <250000>;
+ flash-max-microamp = <150000>;
+ led-max-microamp = <25000>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
deleted file mode 100644
index 853737452580..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Kinetic Technologies - KTD2692 Flash LED Driver
-
-KTD2692 is the ideal power solution for high-power flash LEDs.
-It uses ExpressWire single-wire programming for maximum flexibility.
-
-The ExpressWire interface through CTRL pin can control LED on/off and
-enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
-Flash timeout, LVP(low voltage protection).
-
-Also, When the AUX pin is pulled high while CTRL pin is high,
-LED current will be ramped up to the flash-mode current level.
-
-Required properties:
-- compatible : Should be "kinetic,ktd2692".
-- ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
-- aux-gpios : Specifier of the GPIO connected to AUX pin.
-
-Optional properties:
-- vin-supply : "vin" LED supply (2.7V to 5.5V).
- See Documentation/devicetree/bindings/regulator/regulator.txt
-
-A discrete LED element connected to the device must be represented by a child
-node - See Documentation/devicetree/bindings/leds/common.txt
-
-Required properties for flash LED child nodes:
- See Documentation/devicetree/bindings/leds/common.txt
-- led-max-microamp : Minimum Threshold for Timer protection
- is defined internally (Maximum 300mA).
-- flash-max-microamp : Flash LED maximum current
- Formula : I(mA) = 15000 / Rset.
-- flash-max-timeout-us : Flash LED maximum timeout.
-
-Optional properties for flash LED child nodes:
-- label : See Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-ktd2692 {
- compatible = "kinetic,ktd2692";
- ctrl-gpios = <&gpc0 1 0>;
- aux-gpios = <&gpc0 2 0>;
- vin-supply = <&vbat>;
-
- flash-led {
- label = "ktd2692-flash";
- led-max-microamp = <300000>;
- flash-max-microamp = <1500000>;
- flash-max-timeout-us = <1835000>;
- };
-};
--
2.35.1