As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
Signed-off-by: Stephen Kitt <[email protected]>
---
drivers/clk/clk-si570.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/clk/clk-si570.c b/drivers/clk/clk-si570.c
index eea50121718a..1ff8f32f734d 100644
--- a/drivers/clk/clk-si570.c
+++ b/drivers/clk/clk-si570.c
@@ -398,11 +398,20 @@ static const struct regmap_config si570_regmap_config = {
.volatile_reg = si570_regmap_is_volatile,
};
-static int si570_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static const struct i2c_device_id si570_id[] = {
+ { "si570", si57x },
+ { "si571", si57x },
+ { "si598", si59x },
+ { "si599", si59x },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, si570_id);
+
+static int si570_probe(struct i2c_client *client)
{
struct clk_si570 *data;
struct clk_init_data init;
+ const struct i2c_device_id *id = i2c_match_id(si570_id, client);
u32 initial_fout, factory_fout, stability;
bool skip_recall;
int err;
@@ -495,15 +504,6 @@ static int si570_remove(struct i2c_client *client)
return 0;
}
-static const struct i2c_device_id si570_id[] = {
- { "si570", si57x },
- { "si571", si57x },
- { "si598", si59x },
- { "si599", si59x },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, si570_id);
-
static const struct of_device_id clk_si570_of_match[] = {
{ .compatible = "silabs,si570" },
{ .compatible = "silabs,si571" },
@@ -518,7 +518,7 @@ static struct i2c_driver si570_driver = {
.name = "si570",
.of_match_table = clk_si570_of_match,
},
- .probe = si570_probe,
+ .probe_new = si570_probe,
.remove = si570_remove,
.id_table = si570_id,
};
--
2.27.0
On Thu, Apr 07, 2022 at 05:18:30PM +0200, Stephen Kitt wrote:
> As part of the ongoing i2c transition to the simple probe
> ("probe_new"), this patch uses i2c_match_id to retrieve the
> driver_data for the probed device. The id parameter is thus no longer
> necessary and the simple probe can be used instead.
>
> Signed-off-by: Stephen Kitt <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Quoting Stephen Kitt (2022-04-07 08:18:30)
> As part of the ongoing i2c transition to the simple probe
> ("probe_new"), this patch uses i2c_match_id to retrieve the
> driver_data for the probed device. The id parameter is thus no longer
> necessary and the simple probe can be used instead.
>
> Signed-off-by: Stephen Kitt <[email protected]>
> ---
Applied to clk-next