This patch shold not be merged - dtbs files are not stored in the
kernel tree. We just provide this file so the code can be tested.
This overlay is suitable for testing the driver, it can be compiled with
dtc and put in the /boot/overlays/ folder then specified in config.txt
by putting the lines:
dtoverlay= #suppress loading of default overlay for HAT
dtoverlay=sensehat #load custom overlay
at the beginning before any other lines in config.txt
Co-developed-by: Mwesigwa Guma <[email protected]>
Signed-off-by: Mwesigwa Guma <[email protected]>
Co-developed-by: Joel Savitz <[email protected]>
Signed-off-by: Joel Savitz <[email protected]>
Signed-off-by: Charles Mirabile <[email protected]>
---
sensehat.dtbs | 54 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 sensehat.dtbs
diff --git a/sensehat.dtbs b/sensehat.dtbs
new file mode 100644
index 000000000000..82d129c847fb
--- /dev/null
+++ b/sensehat.dtbs
@@ -0,0 +1,54 @@
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "brcm,bcm2835";
+};
+
+&i2c1 {
+ #address-cells = <0x01>;
+ #size-cells = <0x00>;
+ status = "okay";
+
+ sensehat@46 {
+ #address-cells = <0x01>;
+ #size-cells = <0x00>;
+ compatible = "raspberrypi,sensehat";
+ reg = <0x46>;
+ interrupt-parent = <&gpio>;
+ status = "okay";
+ display {
+ compatible = "raspberrypi,sensehat-display";
+ status = "okay";
+ };
+ joystick {
+ compatible = "raspberrypi,sensehat-joystick";
+ interrupts = <23 1>;
+ status = "okay";
+ };
+ };
+
+ lsm9ds1-magn@1c {
+ compatible = "st,lsm9ds1-magn";
+ reg = <0x1c>;
+ status = "okay";
+ };
+
+ lsm9ds1-accel@6a {
+ compatible = "st,lsm9ds1-accel";
+ reg = <0x6a>;
+ status = "okay";
+ };
+
+ lps25h-press@5c {
+ compatible = "st,lps25h-press";
+ reg = <0x5c>;
+ status = "okay";
+ };
+
+ hts221-humid@5f {
+ compatible = "st,hts221-humid\0st,hts221";
+ reg = <0x5f>;
+ status = "okay";
+ };
+};
--
2.31.1