This patch fixes a memory corruption that occurred in the
nand_scan() path for Hynix nand device.
On boot, for Hynix nand device will panic at a weird place:
| Unable to handle kernel NULL pointer dereference at virtual
address 00000070
| [00000070] *pgd=00000000
| Internal error: Oops: 5 [#1] PREEMPT SMP ARM
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0
#38
| Hardware name: Generic DT based system
| PC is at nandc_set_reg+0x8/0x1c
| LR is at qcom_nandc_command+0x20c/0x5d0
| pc : [<c088b74c>] lr : [<c088d9c8>] psr: 00000113
| sp : c14adc50 ip : c14ee208 fp : c0cc970c
| r10: 000000a3 r9 : 00000000 r8 : 00000040
| r7 : c16f6a00 r6 : 00000090 r5 : 00000004 r4 :c14ee040
| r3 : 00000000 r2 : 0000000b r1 : 00000000 r0 :c14ee040
| Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
| Control: 10c5387d Table: 8020406a DAC: 00000051
| Register r0 information: slab kmalloc-2k start c14ee000 pointer offset
64 size 2048
| Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
| nandc_set_reg from qcom_nandc_command+0x20c/0x5d0
| qcom_nandc_command from nand_readid_op+0x198/0x1e8
| nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78
| hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454
| hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8
| nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0
| qcom_nandc_probe from platform_probe+0x58/0xac
The problem is that the nand_scan()'s qcom_nand_attach_chip callback
is updating the nandc->max_cwperpage from 1 to 4.This causes the
sg_init_table of clear_bam_transaction() in the driver's
qcom_nandc_command() to memset much more than what was initially
allocated by alloc_bam_transaction().
This patch will update nandc->max_cwperpage 1 to 4 after nand_scan()
returns, and remove updating nandc->max_cwperpage from
qcom_nand_attach_chip call back.
Signed-off-by: Md Sadre Alam <[email protected]>
Signed-off-by: Sricharan R <[email protected]>
---
[V2]
* Freed previously alloacted memory for bam txn before updating
max_cwperpage inside qcom_nand_attach_chip().
* Moved alloc_bam_transaction() inside qcom_nand_attach_chip().
after upding max_cwperpage 4 or 8 based on page size.
drivers/mtd/nand/raw/qcom_nandc.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 1a77542..048b255 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2651,10 +2651,23 @@ static int qcom_nand_attach_chip(struct nand_chip *chip)
ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);
+ /* Free the initially allocated BAM transaction for reading the ONFI params */
+ if (nandc->props->is_bam)
+ free_bam_transaction(nandc);
nandc->max_cwperpage = max_t(unsigned int, nandc->max_cwperpage,
cwperpage);
+ /* Now allocate the BAM transaction based on updated max_cwperpage */
+ if (nandc->props->is_bam) {
+ nandc->bam_txn = alloc_bam_transaction(nandc);
+ if (!nandc->bam_txn) {
+ dev_err(nandc->dev,
+ "failed to allocate bam transaction\n");
+ return -ENOMEM;
+ }
+ }
+
/*
* DATA_UD_BYTES varies based on whether the read/write command protects
* spare data with ECC too. We protect spare data by default, so we set
@@ -2955,17 +2968,6 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
if (ret)
return ret;
- if (nandc->props->is_bam) {
- free_bam_transaction(nandc);
- nandc->bam_txn = alloc_bam_transaction(nandc);
- if (!nandc->bam_txn) {
- dev_err(nandc->dev,
- "failed to allocate bam transaction\n");
- nand_cleanup(chip);
- return -ENOMEM;
- }
- }
-
ret = mtd_device_parse_register(mtd, probes, NULL, NULL, 0);
if (ret)
nand_cleanup(chip);
--
2.7.4
On Thu, Apr 14, 2022 at 05:36:42PM +0200, Miquel Raynal wrote:
> Hi Md,
>
> [email protected] wrote on Thu, 14 Apr 2022 21:00:17 +0530:
>
> > This patch fixes a memory corruption that occurred in the
> > nand_scan() path for Hynix nand device.
> >
> > On boot, for Hynix nand device will panic at a weird place:
> > | Unable to handle kernel NULL pointer dereference at virtual
> > address 00000070
> > | [00000070] *pgd=00000000
> > | Internal error: Oops: 5 [#1] PREEMPT SMP ARM
> > | Modules linked in:
> > | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0
> > #38
> > | Hardware name: Generic DT based system
> > | PC is at nandc_set_reg+0x8/0x1c
> > | LR is at qcom_nandc_command+0x20c/0x5d0
> > | pc : [<c088b74c>] lr : [<c088d9c8>] psr: 00000113
> > | sp : c14adc50 ip : c14ee208 fp : c0cc970c
> > | r10: 000000a3 r9 : 00000000 r8 : 00000040
> > | r7 : c16f6a00 r6 : 00000090 r5 : 00000004 r4 :c14ee040
> > | r3 : 00000000 r2 : 0000000b r1 : 00000000 r0 :c14ee040
> > | Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
> > | Control: 10c5387d Table: 8020406a DAC: 00000051
> > | Register r0 information: slab kmalloc-2k start c14ee000 pointer offset
> > 64 size 2048
> > | Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
> > | nandc_set_reg from qcom_nandc_command+0x20c/0x5d0
> > | qcom_nandc_command from nand_readid_op+0x198/0x1e8
> > | nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78
> > | hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454
> > | hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8
> > | nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0
> > | qcom_nandc_probe from platform_probe+0x58/0xac
> >
> > The problem is that the nand_scan()'s qcom_nand_attach_chip callback
> > is updating the nandc->max_cwperpage from 1 to 4.This causes the
> > sg_init_table of clear_bam_transaction() in the driver's
> > qcom_nandc_command() to memset much more than what was initially
> > allocated by alloc_bam_transaction().
> >
> > This patch will update nandc->max_cwperpage 1 to 4 after nand_scan()
> > returns, and remove updating nandc->max_cwperpage from
> > qcom_nand_attach_chip call back.
>
> Please update also the commit log.
>
> Fixes: ?
> Cc: stable ?
Also please add Reported-by to credit Konrad.
Thanks,
Mani
>
> > Signed-off-by: Md Sadre Alam <[email protected]>
> > Signed-off-by: Sricharan R <[email protected]>
> > ---
> > [V2]
>
> Thanks,
> Miqu?l
Hi Md,
[email protected] wrote on Thu, 14 Apr 2022 21:00:17 +0530:
> This patch fixes a memory corruption that occurred in the
> nand_scan() path for Hynix nand device.
>
> On boot, for Hynix nand device will panic at a weird place:
> | Unable to handle kernel NULL pointer dereference at virtual
> address 00000070
> | [00000070] *pgd=00000000
> | Internal error: Oops: 5 [#1] PREEMPT SMP ARM
> | Modules linked in:
> | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0
> #38
> | Hardware name: Generic DT based system
> | PC is at nandc_set_reg+0x8/0x1c
> | LR is at qcom_nandc_command+0x20c/0x5d0
> | pc : [<c088b74c>] lr : [<c088d9c8>] psr: 00000113
> | sp : c14adc50 ip : c14ee208 fp : c0cc970c
> | r10: 000000a3 r9 : 00000000 r8 : 00000040
> | r7 : c16f6a00 r6 : 00000090 r5 : 00000004 r4 :c14ee040
> | r3 : 00000000 r2 : 0000000b r1 : 00000000 r0 :c14ee040
> | Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
> | Control: 10c5387d Table: 8020406a DAC: 00000051
> | Register r0 information: slab kmalloc-2k start c14ee000 pointer offset
> 64 size 2048
> | Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
> | nandc_set_reg from qcom_nandc_command+0x20c/0x5d0
> | qcom_nandc_command from nand_readid_op+0x198/0x1e8
> | nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78
> | hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454
> | hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8
> | nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0
> | qcom_nandc_probe from platform_probe+0x58/0xac
>
> The problem is that the nand_scan()'s qcom_nand_attach_chip callback
> is updating the nandc->max_cwperpage from 1 to 4.This causes the
> sg_init_table of clear_bam_transaction() in the driver's
> qcom_nandc_command() to memset much more than what was initially
> allocated by alloc_bam_transaction().
>
> This patch will update nandc->max_cwperpage 1 to 4 after nand_scan()
> returns, and remove updating nandc->max_cwperpage from
> qcom_nand_attach_chip call back.
Please update also the commit log.
Fixes: ?
Cc: stable ?
> Signed-off-by: Md Sadre Alam <[email protected]>
> Signed-off-by: Sricharan R <[email protected]>
> ---
> [V2]
Thanks,
Miquèl
On 4/14/2022 9:23 PM, Manivannan Sadhasivam wrote:
> WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.
>
> On Thu, Apr 14, 2022 at 05:36:42PM +0200, Miquel Raynal wrote:
>> Hi Md,
>>
>> [email protected] wrote on Thu, 14 Apr 2022 21:00:17 +0530:
>>
>>> This patch fixes a memory corruption that occurred in the
>>> nand_scan() path for Hynix nand device.
>>>
>>> On boot, for Hynix nand device will panic at a weird place:
>>> | Unable to handle kernel NULL pointer dereference at virtual
>>> address 00000070
>>> | [00000070] *pgd=00000000
>>> | Internal error: Oops: 5 [#1] PREEMPT SMP ARM
>>> | Modules linked in:
>>> | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0
>>> #38
>>> | Hardware name: Generic DT based system
>>> | PC is at nandc_set_reg+0x8/0x1c
>>> | LR is at qcom_nandc_command+0x20c/0x5d0
>>> | pc : [<c088b74c>] lr : [<c088d9c8>] psr: 00000113
>>> | sp : c14adc50 ip : c14ee208 fp : c0cc970c
>>> | r10: 000000a3 r9 : 00000000 r8 : 00000040
>>> | r7 : c16f6a00 r6 : 00000090 r5 : 00000004 r4 :c14ee040
>>> | r3 : 00000000 r2 : 0000000b r1 : 00000000 r0 :c14ee040
>>> | Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
>>> | Control: 10c5387d Table: 8020406a DAC: 00000051
>>> | Register r0 information: slab kmalloc-2k start c14ee000 pointer offset
>>> 64 size 2048
>>> | Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
>>> | nandc_set_reg from qcom_nandc_command+0x20c/0x5d0
>>> | qcom_nandc_command from nand_readid_op+0x198/0x1e8
>>> | nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78
>>> | hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454
>>> | hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8
>>> | nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0
>>> | qcom_nandc_probe from platform_probe+0x58/0xac
>>>
>>> The problem is that the nand_scan()'s qcom_nand_attach_chip callback
>>> is updating the nandc->max_cwperpage from 1 to 4.This causes the
>>> sg_init_table of clear_bam_transaction() in the driver's
>>> qcom_nandc_command() to memset much more than what was initially
>>> allocated by alloc_bam_transaction().
>>>
>>> This patch will update nandc->max_cwperpage 1 to 4 after nand_scan()
>>> returns, and remove updating nandc->max_cwperpage from
>>> qcom_nand_attach_chip call back.
>> Please update also the commit log.
>>
>> Fixes: ?
>> Cc: stable ?
> Also please add Reported-by to credit Konrad.
Updated in V3 patch.
>
> Thanks,
> Mani
>
>>> Signed-off-by: Md Sadre Alam <[email protected]>
>>> Signed-off-by: Sricharan R <[email protected]>
>>> ---
>>> [V2]
>> Thanks,
>> Miquèl