Qcom BAM DT spec expects generic DMA controller node name as
"dma-controller" to enable validations.
Signed-off-by: Kuldeep Singh <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
v3: Add Krzysztof R-b tag
---
v2: No change
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 8cb04aa8ed2f..7e68d4b1527f 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1155,7 +1155,7 @@ vsdcc_fixed: vsdcc-regulator {
regulator-always-on;
};
- sdcc1bam: dma@12402000 {
+ sdcc1bam: dma-controller@12402000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12402000 0x8000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -1165,7 +1165,7 @@ sdcc1bam: dma@12402000 {
qcom,ee = <0>;
};
- sdcc3bam: dma@12182000 {
+ sdcc3bam: dma-controller@12182000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12182000 0x8000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
--
2.25.1