Changes since v7:
* added newlines and fixed indentations suggested by Shawn (see v6)
Abel Vesa (8):
arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl
dt-bindings: fsl: scu: Add i.MX8DXL ocotp and scu-pd binding
dt-bindings: arm: Document i.MX8DXL EVK board binding
dt-bindings: mmc: imx-esdhc: Add i.MX8DXL compatible string
dt-bindings: net: fec: Add i.MX8DXL compatible string
dt-bindings: phy: mxs-usb-phy: Add i.MX8DXL compatible string
dt-bindings: usb: ci-hdrc-usb2: Add i.MX8DXL compatible string
dt-bindings: usb: usbmisc-imx: Add i.MX8DXL compatible string
Jacky Bai (5):
arm64: dts: freescale: Add the top level dtsi support for imx8dxl
arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi
arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl
arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl
arm64: dts: freescale: Add i.MX8DXL evk board support
.../bindings/arm/freescale/fsl,scu.txt | 4 +-
.../devicetree/bindings/arm/fsl.yaml | 6 +
.../bindings/mmc/fsl-imx-esdhc.yaml | 1 +
.../devicetree/bindings/net/fsl,fec.yaml | 4 +
.../devicetree/bindings/phy/mxs-usb-phy.txt | 1 +
.../devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 +
.../devicetree/bindings/usb/usbmisc-imx.txt | 1 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 269 ++++++++++++++++++
.../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 52 ++++
.../boot/dts/freescale/imx8dxl-ss-conn.dtsi | 134 +++++++++
.../boot/dts/freescale/imx8dxl-ss-ddr.dtsi | 37 +++
.../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 78 +++++
arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 241 ++++++++++++++++
14 files changed, 829 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi
--
2.34.1
From: Jacky Bai <[email protected]>
On i.MX8DXL, the LSIO subsystem includes below devices:
1x Inline Encryption Engine (IEE)
1x FlexSPI
4x Pulse Width Modulator (PWM)
5x General Purpose Timer (GPT)
8x GPIO
14x Message Unit (MU)
256KB On-Chip Memory (OCRAM)
compared to the common imx8-ss-lsio dtsi, some nodes' interrupt
property need to be updated.
Signed-off-by: Jacky Bai <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
---
.../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 78 +++++++++++++++++++
1 file changed, 78 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
new file mode 100644
index 000000000000..6aec2ec3a848
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+&lsio_gpio0 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio1 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio2 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio3 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio4 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio5 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio6 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio7 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu0 {
+ compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu1 {
+ compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu2 {
+ compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu3 {
+ compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu4 {
+ compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu5 {
+ compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu13 {
+ compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+};
--
2.34.1
From: Jacky Bai <[email protected]>
Add i.MX8DXL EVK board support.
Signed-off-by: Jacky Bai <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 269 ++++++++++++++++++
2 files changed, 270 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 851e6faf8c05..e6ccfee3371f 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -48,6 +48,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
new file mode 100644
index 000000000000..108f4420ffd3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8dxl.dtsi"
+
+/ {
+ model = "Freescale i.MX8DXL EVK";
+ compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl";
+
+ chosen {
+ stdout-path = &lpuart0;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /*
+ * 0x8800_0000 ~ 0x8FFF_FFFF is reserved for M4
+ * Shouldn't be used at A core and Linux side.
+ *
+ */
+ m4_reserved: m4@88000000 {
+ no-map;
+ reg = <0 0x88000000 0 0x8000000>;
+ };
+
+ /* global autoconfigured region for contiguous allocations */
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0 0x14000000>;
+ alloc-ranges = <0 0x98000000 0 0x14000000>;
+ linux,cma-default;
+ };
+ };
+
+ reg_usdhc2_vmmc: usdhc2-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "SD1_SPWR";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&lsio_gpio4 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ off-on-delay-us = <3480>;
+ };
+};
+
+&lpuart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart0>;
+ status = "okay";
+};
+
+&lpuart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart1>;
+ status = "okay";
+};
+
+&lsio_gpio4 {
+ status = "okay";
+};
+
+&lsio_gpio5 {
+ status = "okay";
+};
+
+&thermal_zones {
+ pmic-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+ trips {
+ pmic_alert0: trip0 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ pmic_crit0: trip1 {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&pmic_alert0>;
+ cooling-device =
+ <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ bus-width = <4>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>;
+ max-frequency = <100000000>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0
+ IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK_PAD 0x000014a0
+ IMX8DXL_SPI3_CS0_ADMA_ACM_MCLK_OUT1 0x0600004c
+ IMX8DXL_SNVS_TAMPER_OUT1_LSIO_GPIO2_IO05_IN 0x0600004c
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ IMX8DXL_SPI1_SCK_ADMA_I2C2_SDA 0x06000021
+ IMX8DXL_SPI1_SDO_ADMA_I2C2_SCL 0x06000021
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ IMX8DXL_SPI1_CS0_ADMA_I2C3_SDA 0x06000021
+ IMX8DXL_SPI1_SDI_ADMA_I2C3_SCL 0x06000021
+ >;
+ };
+
+ pinctrl_lpuart0: lpuart0grp {
+ fsl,pins = <
+ IMX8DXL_UART0_RX_ADMA_UART0_RX 0x06000020
+ IMX8DXL_UART0_TX_ADMA_UART0_TX 0x06000020
+ >;
+ };
+
+ pinctrl_lpuart1: lpuart1grp {
+ fsl,pins = <
+ IMX8DXL_UART1_TX_ADMA_UART1_TX 0x06000020
+ IMX8DXL_UART1_RX_ADMA_UART1_RX 0x06000020
+ IMX8DXL_UART1_RTS_B_ADMA_UART1_RTS_B 0x06000020
+ IMX8DXL_UART1_CTS_B_ADMA_UART1_CTS_B 0x06000020
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
+ IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
+ IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
+ IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
+ IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
+ IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
+ IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
+ IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
+ IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
+ IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
+ IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
+ IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
+ IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ IMX8DXL_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x00000040 /* RESET_B */
+ IMX8DXL_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x00000021 /* WP */
+ IMX8DXL_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x00000021 /* CD */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041
+ IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021
+ IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041
+ IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021
+ IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041
+ IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021
+ IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021
+ >;
+ };
+};
--
2.34.1
Add i.MX8DXL compatible string. It also needs "fsl,imx8qm-fec" compatible.
Signed-off-by: Abel Vesa <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
index 58447095f000..29339d0196ec 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -54,6 +54,7 @@ properties:
- const: fsl,imx8qxp-usdhc
- items:
- enum:
+ - fsl,imx8dxl-usdhc
- fsl,imx8mm-usdhc
- fsl,imx8mn-usdhc
- fsl,imx8mp-usdhc
--
2.34.1
Add i.MX8DXL ocotp and scu-pd compatibles to the SCU bindings
documentation.
Signed-off-by: Abel Vesa <[email protected]>
Acked-by: Rob Herring <[email protected]>
dt-bindings: fsl: scu: Add i.MX8DXL scu-pd binding
Add i.MX8DXL scu-pd compatible to the SCU bindings documentation.
Signed-off-by: Abel Vesa <[email protected]>
---
Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index a87ec15e28d2..27a2d9c45b0b 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -70,6 +70,7 @@ domain binding[2].
Required properties:
- compatible: Should be one of:
+ "fsl,imx8dxl-scu-pd",
"fsl,imx8qm-scu-pd",
"fsl,imx8qxp-scu-pd"
followed by "fsl,scu-pd"
@@ -142,7 +143,8 @@ OCOTP bindings based on SCU Message Protocol
Required properties:
- compatible: Should be one of:
"fsl,imx8qm-scu-ocotp",
- "fsl,imx8qxp-scu-ocotp".
+ "fsl,imx8qxp-scu-ocotp",
+ "fsl,imx8dxl-scu-ocotp".
- #address-cells: Must be 1. Contains byte index
- #size-cells: Must be 1. Contains byte length
--
2.34.1
On Tue, 19 Apr 2022 at 13:35, Abel Vesa <[email protected]> wrote:
>
> Add i.MX8DXL compatible string. It also needs "fsl,imx8qm-fec" compatible.
>
> Signed-off-by: Abel Vesa <[email protected]>
> Acked-by: Rob Herring <[email protected]>
Applied for next, thanks!
Kind regards
Uffe
> ---
> Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> index 58447095f000..29339d0196ec 100644
> --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> @@ -54,6 +54,7 @@ properties:
> - const: fsl,imx8qxp-usdhc
> - items:
> - enum:
> + - fsl,imx8dxl-usdhc
> - fsl,imx8mm-usdhc
> - fsl,imx8mn-usdhc
> - fsl,imx8mp-usdhc
> --
> 2.34.1
>