The pinctrl device tree binding will be converted to YAML format. Rename
the pin nodes so they end with "-pins" to match the schema.
Signed-off-by: Michael Walle <[email protected]>
---
The YAML conversion patch is alread in
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel
arch/mips/boot/dts/mscc/ocelot.dtsi | 4 ++--
arch/mips/boot/dts/mscc/ocelot_pcb120.dts | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index e51db651af13..cfc219a72bdd 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -225,7 +225,7 @@ uart2_pins: uart2-pins {
function = "uart2";
};
- miim1: miim1 {
+ miim1_pins: miim1-pins {
pins = "GPIO_14", "GPIO_15";
function = "miim";
};
@@ -261,7 +261,7 @@ mdio1: mdio@10700c0 {
reg = <0x10700c0 0x24>;
interrupts = <15>;
pinctrl-names = "default";
- pinctrl-0 = <&miim1>;
+ pinctrl-0 = <&miim1_pins>;
status = "disabled";
};
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
index bd240690cb37..d348742c233d 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
@@ -22,12 +22,12 @@ memory@0 {
};
&gpio {
- phy_int_pins: phy_int_pins {
+ phy_int_pins: phy-int-pins {
pins = "GPIO_4";
function = "gpio";
};
- phy_load_save_pins: phy_load_save_pins {
+ phy_load_save_pins: phy-load-save-pins {
pins = "GPIO_10";
function = "ptp2";
};
@@ -40,7 +40,7 @@ &mdio0 {
&mdio1 {
status = "okay";
pinctrl-names = "default";
- pinctrl-0 = <&miim1>, <&phy_int_pins>, <&phy_load_save_pins>;
+ pinctrl-0 = <&miim1_pins>, <&phy_int_pins>, <&phy_load_save_pins>;
phy7: ethernet-phy@0 {
reg = <0>;
--
2.30.2