There is a lot of sparse warnings:
.../icom.c:228:30: warning: cast from restricted __le16
.../icom.c:232:66: warning: incorrect type in assignment (different base types)
.../icom.c:232:66: expected unsigned int [usertype] leBuffer
.../icom.c:232:66: got restricted __le32 [usertype]
.../icom.c:237:30: warning: cast from restricted __le16
...
.../icom.c:1228:22: warning: cast from restricted __le16
And they are correct. So sort them all out by using proper __leXX and
uXX types and the right direction of conversion: le16_to_cpu() instead
of cpu_to_le16(), where appropriate.
Signed-off-by: Jiri Slaby <[email protected]>
---
drivers/tty/serial/icom.c | 31 ++++++++++++++-----------------
drivers/tty/serial/icom.h | 30 +++++++++++++++---------------
2 files changed, 29 insertions(+), 32 deletions(-)
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index fa284f9cbdb0..e1f9d42180ff 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -224,7 +224,7 @@ static int get_port_memory(struct icom_port *icom_port)
if (index < (NUM_XBUFFS - 1)) {
memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area));
icom_port->statStg->xmit[index].leLengthASD =
- (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ);
+ cpu_to_le16(XMIT_BUFF_SZ);
trace(icom_port, "FOD_ADDR", stgAddr);
trace(icom_port, "FOD_XBUFF",
(unsigned long) icom_port->xmit_buf);
@@ -233,7 +233,7 @@ static int get_port_memory(struct icom_port *icom_port)
} else if (index == (NUM_XBUFFS - 1)) {
memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area));
icom_port->statStg->xmit[index].leLengthASD =
- (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ);
+ cpu_to_le16(XMIT_BUFF_SZ);
trace(icom_port, "FOD_XBUFF",
(unsigned long) icom_port->xmit_buf);
icom_port->statStg->xmit[index].leBuffer =
@@ -251,7 +251,7 @@ static int get_port_memory(struct icom_port *icom_port)
stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]);
icom_port->statStg->rcv[index].leLength = 0;
icom_port->statStg->rcv[index].WorkingLength =
- (unsigned short int) cpu_to_le16(RCV_BUFF_SZ);
+ cpu_to_le16(RCV_BUFF_SZ);
if (index < (NUM_RBUFFS - 1) ) {
offset = stgAddr - (unsigned long) icom_port->statStg;
icom_port->statStg->rcv[index].leNext =
@@ -627,7 +627,7 @@ static int icom_write(struct uart_port *port)
trace(icom_port, "WRITE", 0);
- if (cpu_to_le16(icom_port->statStg->xmit[0].flags) &
+ if (le16_to_cpu(icom_port->statStg->xmit[0].flags) &
SA_FLAGS_READY_TO_XMIT) {
trace(icom_port, "WRITE_FULL", 0);
return 0;
@@ -699,8 +699,7 @@ static inline void check_modem_status(struct icom_port *icom_port)
static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
{
- unsigned short int count;
- int i;
+ u16 count, i;
if (port_int_reg & (INT_XMIT_COMPLETED)) {
trace(icom_port, "XMIT_COMPLETE", 0);
@@ -709,8 +708,7 @@ static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
icom_port->statStg->xmit[0].flags &=
cpu_to_le16(~SA_FLAGS_READY_TO_XMIT);
- count = (unsigned short int)
- cpu_to_le16(icom_port->statStg->xmit[0].leLength);
+ count = le16_to_cpu(icom_port->statStg->xmit[0].leLength);
icom_port->uart_port.icount.tx += count;
for (i=0; i<count &&
@@ -732,7 +730,7 @@ static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
{
short int count, rcv_buff;
struct tty_port *port = &icom_port->uart_port.state->port;
- unsigned short int status;
+ u16 status;
struct uart_icount *icount;
unsigned long offset;
unsigned char flag;
@@ -740,19 +738,18 @@ static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
trace(icom_port, "RCV_COMPLETE", 0);
rcv_buff = icom_port->next_rcv;
- status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags);
+ status = le16_to_cpu(icom_port->statStg->rcv[rcv_buff].flags);
while (status & SA_FL_RCV_DONE) {
int first = -1;
trace(icom_port, "FID_STATUS", status);
- count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength);
+ count = le16_to_cpu(icom_port->statStg->rcv[rcv_buff].leLength);
trace(icom_port, "RCV_COUNT", count);
trace(icom_port, "REAL_COUNT", count);
- offset =
- cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) -
+ offset = le32_to_cpu(icom_port->statStg->rcv[rcv_buff].leBuffer) -
icom_port->recv_buf_pci;
/* Block copy all but the last byte as this may have status */
@@ -822,13 +819,13 @@ static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
icom_port->statStg->rcv[rcv_buff].flags = 0;
icom_port->statStg->rcv[rcv_buff].leLength = 0;
icom_port->statStg->rcv[rcv_buff].WorkingLength =
- (unsigned short int) cpu_to_le16(RCV_BUFF_SZ);
+ cpu_to_le16(RCV_BUFF_SZ);
rcv_buff++;
if (rcv_buff == NUM_RBUFFS)
rcv_buff = 0;
- status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags);
+ status = le16_to_cpu(icom_port->statStg->rcv[rcv_buff].flags);
}
icom_port->next_rcv = rcv_buff;
@@ -933,7 +930,7 @@ static unsigned int icom_tx_empty(struct uart_port *port)
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
- if (cpu_to_le16(icom_port->statStg->xmit[0].flags) &
+ if (le16_to_cpu(icom_port->statStg->xmit[0].flags) &
SA_FLAGS_READY_TO_XMIT)
ret = TIOCSER_TEMT;
else
@@ -1224,7 +1221,7 @@ static void icom_set_termios(struct uart_port *port,
icom_port->statStg->rcv[rcv_buff].flags = 0;
icom_port->statStg->rcv[rcv_buff].leLength = 0;
icom_port->statStg->rcv[rcv_buff].WorkingLength =
- (unsigned short int) cpu_to_le16(RCV_BUFF_SZ);
+ cpu_to_le16(RCV_BUFF_SZ);
}
for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) {
diff --git a/drivers/tty/serial/icom.h b/drivers/tty/serial/icom.h
index 26e3aa7b01e2..62d5ba81dcfc 100644
--- a/drivers/tty/serial/icom.h
+++ b/drivers/tty/serial/icom.h
@@ -171,13 +171,13 @@ struct statusArea {
/* Transmit Status Area */
/**********************************************/
struct xmit_status_area{
- u32 leNext; /* Next entry in Little Endian on Adapter */
- u32 leNextASD;
- u32 leBuffer; /* Buffer for entry in LE for Adapter */
- u16 leLengthASD;
- u16 leOffsetASD;
- u16 leLength; /* Length of data in segment */
- u16 flags;
+ __le32 leNext; /* Next entry in Little Endian on Adapter */
+ __le32 leNextASD;
+ __le32 leBuffer; /* Buffer for entry in LE for Adapter */
+ __le16 leLengthASD;
+ __le16 leOffsetASD;
+ __le16 leLength; /* Length of data in segment */
+ __le16 flags;
#define SA_FLAGS_DONE 0x0080 /* Done with Segment */
#define SA_FLAGS_CONTINUED 0x8000 /* More Segments */
#define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */
@@ -189,13 +189,13 @@ struct statusArea {
/* Receive Status Area */
/**********************************************/
struct {
- u32 leNext; /* Next entry in Little Endian on Adapter */
- u32 leNextASD;
- u32 leBuffer; /* Buffer for entry in LE for Adapter */
- u16 WorkingLength; /* size of segment */
- u16 reserv01;
- u16 leLength; /* Length of data in segment */
- u16 flags;
+ __le32 leNext; /* Next entry in Little Endian on Adapter */
+ __le32 leNextASD;
+ __le32 leBuffer; /* Buffer for entry in LE for Adapter */
+ __le16 WorkingLength; /* size of segment */
+ __le16 reserv01;
+ __le16 leLength; /* Length of data in segment */
+ __le16 flags;
#define SA_FL_RCV_DONE 0x0010 /* Data ready */
#define SA_FLAGS_OVERRUN 0x0040
#define SA_FLAGS_PARITY_ERROR 0x0080
@@ -227,7 +227,7 @@ struct icom_port {
int port;
struct statusArea *statStg;
dma_addr_t statStg_pci;
- u32 *xmitRestart;
+ __le32 *xmitRestart;
dma_addr_t xmitRestart_pci;
unsigned char *xmit_buf;
dma_addr_t xmit_buf_pci;
--
2.36.0