This patchset adds support for ltrf216a Ambient Light Sensor
and documents the DT bindings for the same.
Changes in v2
- Add support for 25ms and 50ms integration time.
- Rename some of the macros as per names given in datasheet
- Add a comment for the mutex lock
- Use read_avail callback instead of attributes and set the
appropriate _available bit.
- Use FIELD_PREP() at appropriate places.
- Add a constant lookup table for integration time and reg val
- Use BIT() macro for magic numbers.
- Improve error handling at few places.
- Use get_unaligned_le24() and div_u64()
- Use probe_new() callback and devm functions
- Return errors in probe using dev_err_probe()
- Use DEFINE_SIMPLE_DEV_PM_OPS()
- Correct the formula for lux to use 0.45 instead of 0.8
- Add interrupt and power supply property in DT bindings
- Add vendor prefix name as per the alphabetical order.
Shreeya Patel (3):
dt-bindings: vendor-prefixes: Add 'ltr' as deprecated vendor prefix
dt-bindings: Document ltrf216a light sensor bindings
iio: light: Add support for ltrf216a sensor
.../bindings/iio/light/liteon,ltrf216a.yaml | 52 +++
.../devicetree/bindings/vendor-prefixes.yaml | 3 +
drivers/iio/light/Kconfig | 10 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/ltrf216a.c | 349 ++++++++++++++++++
5 files changed, 415 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
create mode 100644 drivers/iio/light/ltrf216a.c
--
2.30.2
From: Zhigang Shi <[email protected]>
Add initial support for ltrf216a ambient light sensor.
Datasheet: gitlab.steamos.cloud/shreeya/iio/-/blob/main/LTRF216A.pdf
Co-developed-by: Shreeya Patel <[email protected]>
Signed-off-by: Shreeya Patel <[email protected]>
Signed-off-by: Zhigang Shi <[email protected]>
---
Changes in v2
- Add support for 25ms and 50ms integration time.
- Rename some of the macros as per names given in datasheet
- Add a comment for the mutex lock
- Use read_avail callback instead of attributes and set the
appropriate _available bit.
- Use FIELD_PREP() at appropriate places.
- Add a constant lookup table for integration time and reg val
- Use BIT() macro for magic numbers.
- Improve error handling at few places.
- Use get_unaligned_le24() and div_u64()
- Use probe_new() callback and devm functions
- Return errors in probe using dev_err_probe()
- Use DEFINE_SIMPLE_DEV_PM_OPS()
- Correct the formula for lux to use 0.45 instead of 0.8
drivers/iio/light/Kconfig | 10 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/ltrf216a.c | 349 +++++++++++++++++++++++++++++++++++
3 files changed, 360 insertions(+)
create mode 100644 drivers/iio/light/ltrf216a.c
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index a62c7b4b8678..33d2b24ba1da 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -318,6 +318,16 @@ config SENSORS_LM3533
changes. The ALS-control output values can be set per zone for the
three current output channels.
+config LTRF216A
+ tristate "Liteon LTRF216A Light Sensor"
+ depends on I2C
+ help
+ If you say Y or M here, you get support for Liteon LTRF216A
+ Ambient Light Sensor.
+
+ If built as a dynamically linked module, it will be called
+ ltrf216a.
+
config LTR501
tristate "LTR-501ALS-01 light sensor"
depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index d10912faf964..8fa91b9fe5b6 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o
obj-$(CONFIG_ISL29125) += isl29125.o
obj-$(CONFIG_JSA1212) += jsa1212.o
obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
+obj-$(CONFIG_LTRF216A) += ltrf216a.o
obj-$(CONFIG_LTR501) += ltr501.o
obj-$(CONFIG_LV0104CS) += lv0104cs.o
obj-$(CONFIG_MAX44000) += max44000.o
diff --git a/drivers/iio/light/ltrf216a.c b/drivers/iio/light/ltrf216a.c
new file mode 100644
index 000000000000..de6d2e2e7f08
--- /dev/null
+++ b/drivers/iio/light/ltrf216a.c
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LTRF216A Ambient Light Sensor
+ *
+ * Copyright (C) 2021 Lite-On Technology Corp (Singapore)
+ * Author: Shi Zhigang <[email protected]>
+ *
+ * IIO driver for LTRF216A (7-bit I2C slave address 0x53).
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/mod_devicetable.h>
+#include <linux/bitfield.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <asm/unaligned.h>
+
+#define LTRF216A_DRV_NAME "ltrf216a"
+
+#define LTRF216A_MAIN_CTRL 0x00
+
+#define LTRF216A_ALS_DATA_STATUS BIT(3)
+#define LTRF216A_ALS_ENABLE_MASK BIT(1)
+
+#define LTRF216A_ALS_MEAS_RES 0x04
+#define LTRF216A_MAIN_STATUS 0x07
+#define LTRF216A_CLEAR_DATA_0 0x0A
+
+#define LTRF216A_ALS_DATA_0 0x0D
+
+static const int int_time_mapping[] = { 400000, 200000, 100000, 50000, 25000 };
+
+static const int ltrf216a_int_time_available[5][2] = {
+ {0, 400000},
+ {0, 200000},
+ {0, 100000},
+ {0, 50000},
+ {0, 25000},
+};
+
+static const int ltrf216a_int_time_reg[5][2] = {
+ {400, 0x03},
+ {200, 0x13},
+ {100, 0x22},
+ {50, 0x31},
+ {25, 0x40},
+};
+
+struct ltrf216a_data {
+ struct i2c_client *client;
+ u32 int_time;
+ u8 int_time_fac;
+ u8 als_gain_fac;
+ struct mutex mutex; /* Protect read and write operations */
+};
+
+/* open air. need to update based on TP transmission rate. */
+#define WIN_FAC 1
+
+static const struct iio_chan_spec ltrf216a_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_INT_TIME),
+ .info_mask_separate_available =
+ BIT(IIO_CHAN_INFO_INT_TIME),
+ }
+};
+
+static int ltrf216a_init(struct iio_dev *indio_dev)
+{
+ int ret;
+ struct ltrf216a_data *data = iio_priv(indio_dev);
+
+ ret = i2c_smbus_read_byte_data(data->client, LTRF216A_MAIN_CTRL);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Error reading LTRF216A_MAIN_CTRL\n");
+ return ret;
+ }
+
+ /* enable sensor */
+ ret |= FIELD_PREP(LTRF216A_ALS_ENABLE_MASK, 1);
+ ret = i2c_smbus_write_byte_data(data->client, LTRF216A_MAIN_CTRL, ret);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Error writing LTRF216A_MAIN_CTRL\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ltrf216a_disable(struct iio_dev *indio_dev)
+{
+ int ret;
+ struct ltrf216a_data *data = iio_priv(indio_dev);
+
+ ret = i2c_smbus_write_byte_data(data->client, LTRF216A_MAIN_CTRL, 0);
+ if (ret < 0)
+ dev_err(&data->client->dev, "Error writing LTRF216A_MAIN_CTRL\n");
+
+ return ret;
+}
+
+static void als_ltrf216a_disable(void *data)
+{
+ struct iio_dev *indio_dev = data;
+
+ ltrf216a_disable(indio_dev);
+}
+
+static int ltrf216a_set_int_time(struct ltrf216a_data *data, int itime)
+{
+ int i, ret, index = -1;
+ u8 reg_val;
+
+ for (i = 0; i < ARRAY_SIZE(int_time_mapping); i++) {
+ if (int_time_mapping[i] == itime) {
+ index = i;
+ break;
+ }
+ }
+
+ if (index < 0)
+ return -EINVAL;
+
+ reg_val = ltrf216a_int_time_reg[index][1];
+ data->int_time_fac = ltrf216a_int_time_reg[index][0];
+
+ ret = i2c_smbus_write_byte_data(data->client, LTRF216A_ALS_MEAS_RES, reg_val);
+ if (ret < 0)
+ return ret;
+
+ data->int_time = itime;
+
+ return 0;
+}
+
+static int ltrf216a_get_int_time(struct ltrf216a_data *data, int *val, int *val2)
+{
+ *val = 0;
+ *val2 = data->int_time;
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int ltrf216a_read_data(struct ltrf216a_data *data, u8 addr)
+{
+ int i, ret = -1, tries = 25;
+ u8 buf[3];
+
+ while (tries--) {
+ ret = i2c_smbus_read_byte_data(data->client, LTRF216A_MAIN_STATUS);
+ if (ret < 0)
+ return ret;
+ if (ret & LTRF216A_ALS_DATA_STATUS)
+ break;
+ msleep(20);
+ }
+
+ for (i = 0; i < 3; i++) {
+ ret = i2c_smbus_read_byte_data(data->client, addr);
+ if (ret < 0)
+ return ret;
+ buf[i] = ret;
+ addr++;
+ }
+
+ return get_unaligned_le24(&buf[0]);
+}
+
+static int ltrf216a_get_lux(struct ltrf216a_data *data)
+{
+ int greendata, cleardata;
+ u64 lux, div;
+
+ greendata = ltrf216a_read_data(data, LTRF216A_ALS_DATA_0);
+ cleardata = ltrf216a_read_data(data, LTRF216A_CLEAR_DATA_0);
+
+ if (greendata < 0 || cleardata < 0) {
+ return -EINVAL;
+
+ } else {
+ lux = greendata * 45 * WIN_FAC * 100;
+ div = data->als_gain_fac * data->int_time_fac * 100;
+ lux = div_u64(lux, div);
+ }
+
+ return lux;
+}
+
+static int ltrf216a_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ int ret;
+ struct ltrf216a_data *data = iio_priv(indio_dev);
+
+ mutex_lock(&data->mutex);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_PROCESSED:
+ ret = ltrf216a_get_lux(data);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ ret = IIO_VAL_INT;
+ break;
+ case IIO_CHAN_INFO_INT_TIME:
+ ret = ltrf216a_get_int_time(data, val, val2);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static int ltrf216a_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val,
+ int val2, long mask)
+{
+ struct ltrf216a_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_INT_TIME:
+ if (val != 0)
+ return -EINVAL;
+ mutex_lock(&data->mutex);
+ ret = ltrf216a_set_int_time(data, val2);
+ mutex_unlock(&data->mutex);
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ltrf216a_read_available(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_INT_TIME:
+ *length = ARRAY_SIZE(ltrf216a_int_time_available) * 2;
+ *vals = (const int *)ltrf216a_int_time_available;
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info ltrf216a_info = {
+ .read_raw = ltrf216a_read_raw,
+ .write_raw = ltrf216a_write_raw,
+ .read_avail = ltrf216a_read_available,
+};
+
+static int ltrf216a_probe(struct i2c_client *client)
+{
+ struct ltrf216a_data *data;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ data->client = client;
+
+ mutex_init(&data->mutex);
+
+ indio_dev->info = <rf216a_info;
+ indio_dev->name = LTRF216A_DRV_NAME;
+ indio_dev->channels = ltrf216a_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ltrf216a_channels);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = ltrf216a_init(indio_dev);
+ if (ret < 0)
+ return dev_err_probe(&client->dev, ret,
+ "ltrf216a chip init failed\n");
+
+ data->int_time = 100000;
+ data->int_time_fac = 100;
+ data->als_gain_fac = 3;
+
+ ret = devm_add_action_or_reset(&client->dev, als_ltrf216a_disable,
+ indio_dev);
+ if (ret < 0)
+ return ret;
+
+ return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static int ltrf216a_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+
+ return ltrf216a_disable(indio_dev);
+}
+
+static int ltrf216a_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+
+ return ltrf216a_init(indio_dev);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(ltrf216a_pm_ops, ltrf216a_suspend, ltrf216a_resume);
+
+static const struct i2c_device_id ltrf216a_id[] = {
+ { LTRF216A_DRV_NAME, 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ltrf216a_id);
+
+static const struct of_device_id ltrf216a_of_match[] = {
+ { .compatible = "liteon,ltrf216a", },
+ { .compatible = "ltr,ltrf216a", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ltrf216a_of_match);
+
+static struct i2c_driver ltrf216a_driver = {
+ .driver = {
+ .name = LTRF216A_DRV_NAME,
+ .pm = pm_sleep_ptr(<rf216a_pm_ops),
+ .of_match_table = ltrf216a_of_match,
+ },
+ .probe_new = ltrf216a_probe,
+ .id_table = ltrf216a_id,
+};
+
+module_i2c_driver(ltrf216a_driver);
+
+MODULE_AUTHOR("Shi Zhigang <[email protected]>");
+MODULE_DESCRIPTION("LTRF216A ambient light sensor driver");
+MODULE_LICENSE("GPL");
--
2.30.2
Add devicetree bindings for ltrf216a ambient light sensor.
Signed-off-by: Shreeya Patel <[email protected]>
---
Changes in v2
- Take over the maintainership for the bindings
- Add interrupt and power supply property in DT bindings
.../bindings/iio/light/liteon,ltrf216a.yaml | 52 +++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
new file mode 100644
index 000000000000..61008bcc6b88
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTRF216A Ambient Light Sensor
+
+maintainers:
+ - Shreeya Patel <[email protected]>
+
+description: |
+ Ambient light sensing with an i2c interface.
+
+properties:
+ compatible:
+ oneOf:
+ - const: liteon,ltrf216a
+ - const: ltr,ltrf216a
+ deprecated: true
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply:
+ description: Regulator that provides power to the sensor.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ light-sensor@53 {
+ compatible = "liteon,ltrf216a";
+ reg = <0x53>;
+ vdd-supply = <&vdd_regulator>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
--
2.30.2
'liteon' is the correct vendor prefix for devices released by
LITE-ON Technology Corp. But one of the released device which uses
ltr216a light sensor exposes the vendor prefix name as 'ltr' through
ACPI.
Hence, add 'ltr' as a deprecated vendor prefix which would suppress the
following warning in case the compatible string used in ltrf216a driver
is "ltr,ltrf216a"
WARNING: DT compatible string vendor "ltr" appears un-documented --
check ./Documentation/devicetree/bindings/vendor-prefixes.yaml
364: FILE: drivers/iio/light/ltrf216a.c:313:
+ { .compatible = "ltr,ltrf216a" },
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Shreeya Patel <[email protected]>
---
Changes in v2
- Add vendor prefix name as per the alphabetical order.
Documentation/devicetree/bindings/vendor-prefixes.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 01430973ecec..02f94fba03b6 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -716,6 +716,9 @@ patternProperties:
description: Loongson Technology Corporation Limited
"^lsi,.*":
description: LSI Corp. (LSI Logic)
+ "^ltr,.*":
+ description: LITE-ON Technology Corp.
+ deprecated: true
"^lwn,.*":
description: Liebherr-Werk Nenzing GmbH
"^lxa,.*":
--
2.30.2
On Thu, 21 Apr 2022 19:31:33 +0530
Shreeya Patel <[email protected]> wrote:
> From: Zhigang Shi <[email protected]>
>
> Add initial support for ltrf216a ambient light sensor.
>
> Datasheet: gitlab.steamos.cloud/shreeya/iio/-/blob/main/LTRF216A.pdf
> Co-developed-by: Shreeya Patel <[email protected]>
> Signed-off-by: Shreeya Patel <[email protected]>
> Signed-off-by: Zhigang Shi <[email protected]>
Hi Shreeya,
Looking pretty good. Just a few minor things in here - I very nearly
just made the changes whilst applying but the one about reusing the
available array is slightly more complex than I like to do without
bouncing it back to the author.
Thanks,
Jonathan
> ---
>
> Changes in v2
> - Add support for 25ms and 50ms integration time.
> - Rename some of the macros as per names given in datasheet
> - Add a comment for the mutex lock
> - Use read_avail callback instead of attributes and set the
> appropriate _available bit.
> - Use FIELD_PREP() at appropriate places.
> - Add a constant lookup table for integration time and reg val
> - Use BIT() macro for magic numbers.
> - Improve error handling at few places.
> - Use get_unaligned_le24() and div_u64()
> - Use probe_new() callback and devm functions
> - Return errors in probe using dev_err_probe()
> - Use DEFINE_SIMPLE_DEV_PM_OPS()
> - Correct the formula for lux to use 0.45 instead of 0.8
>
>
> drivers/iio/light/Kconfig | 10 +
> drivers/iio/light/Makefile | 1 +
> drivers/iio/light/ltrf216a.c | 349 +++++++++++++++++++++++++++++++++++
> 3 files changed, 360 insertions(+)
> create mode 100644 drivers/iio/light/ltrf216a.c
>
> diff --git a/drivers/iio/light/ltrf216a.c b/drivers/iio/light/ltrf216a.c
> new file mode 100644
> index 000000000000..de6d2e2e7f08
> --- /dev/null
> +++ b/drivers/iio/light/ltrf216a.c
> @@ -0,0 +1,349 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * LTRF216A Ambient Light Sensor
> + *
> + * Copyright (C) 2021 Lite-On Technology Corp (Singapore)
> + * Author: Shi Zhigang <[email protected]>
> + *
> + * IIO driver for LTRF216A (7-bit I2C slave address 0x53).
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/i2c.h>
> +#include <linux/mutex.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
I don't think you are using anything from iio/sysfs.h any more so please
drop this header (unless I'm missing something!)
> +#include <linux/mod_devicetable.h>
> +#include <linux/bitfield.h>
> +#include <linux/pm.h>
> +#include <linux/delay.h>
> +#include <asm/unaligned.h>
> +
Where no other reason to have a particular order for headers IIO preference is
3 blocks of headers. First set are the non IIO related ones in alphabetical order.
Second block typically IIO specific ones. Final block the asm includes
So here best order is something like
#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/mutex.h>
#include <linux/pm.h>
#include <linux/iio/iio.h>
#include <asm/unaligned.h>
> +#define LTRF216A_ALS_DATA_0 0x0D
> +
> +static const int int_time_mapping[] = { 400000, 200000, 100000, 50000, 25000 };
You should use the array below for the same matching purpose as this one and
avoid duplicating data.
> +
> +static const int ltrf216a_int_time_available[5][2] = {
> + {0, 400000},
> + {0, 200000},
> + {0, 100000},
> + {0, 50000},
> + {0, 25000},
> +};
> +
> +static const int ltrf216a_int_time_reg[5][2] = {
> + {400, 0x03},
> + {200, 0x13},
> + {100, 0x22},
> + {50, 0x31},
> + {25, 0x40},
> +};
> +
> +struct ltrf216a_data {
> + struct i2c_client *client;
> + u32 int_time;
> + u8 int_time_fac;
> + u8 als_gain_fac;
> + struct mutex mutex; /* Protect read and write operations */
This could probably have been more descriptive. I think you are also
ensuring that the cached state and the device state are kept in sync.
> +};
> +
> +static int ltrf216a_get_lux(struct ltrf216a_data *data)
> +{
> + int greendata, cleardata;
> + u64 lux, div;
> +
> + greendata = ltrf216a_read_data(data, LTRF216A_ALS_DATA_0);
> + cleardata = ltrf216a_read_data(data, LTRF216A_CLEAR_DATA_0);
> +
> + if (greendata < 0 || cleardata < 0) {
> + return -EINVAL;
As this is an error case and you correctly return directly there is
no need to have else. That will reduce indentation and
allow last line to simply be
return div_u64(lux, div);
> +
> + } else {
> + lux = greendata * 45 * WIN_FAC * 100;
> + div = data->als_gain_fac * data->int_time_fac * 100;
> + lux = div_u64(lux, div);
> + }
> +
> + return lux;
> +}
> +