The test driver uses IRQ and GPIO lines to timestamp using HTE
subsystem. The patch also adds compilation support in Kconfig and
Makefile.
Signed-off-by: Dipen Patel <[email protected]>
---
Changes in v6:
- Merged tegra irq and gpio HTE test drivers.
drivers/hte/Kconfig | 7 +
drivers/hte/Makefile | 2 +-
drivers/hte/hte-tegra194-test.c | 239 ++++++++++++++++++++++++++++++++
3 files changed, 247 insertions(+), 1 deletion(-)
create mode 100644 drivers/hte/hte-tegra194-test.c
diff --git a/drivers/hte/Kconfig b/drivers/hte/Kconfig
index 3bd0fa367e84..cf29e0218bae 100644
--- a/drivers/hte/Kconfig
+++ b/drivers/hte/Kconfig
@@ -23,4 +23,11 @@ config HTE_TEGRA194
systems-on-chip. The driver supports 352 LIC IRQs and 39 AON GPIOs
lines for timestamping in realtime.
+config HTE_TEGRA194_TEST
+ tristate "NVIDIA Tegra194 HTE Test"
+ depends on HTE_TEGRA194
+ help
+ The NVIDIA Tegra194 GTE test driver demonstrates how to use HTE
+ framework to timestamp GPIO and LIC IRQ lines.
+
endif
diff --git a/drivers/hte/Makefile b/drivers/hte/Makefile
index 3ae7c4029991..8cca124849d2 100644
--- a/drivers/hte/Makefile
+++ b/drivers/hte/Makefile
@@ -1,3 +1,3 @@
obj-$(CONFIG_HTE) += hte.o
obj-$(CONFIG_HTE_TEGRA194) += hte-tegra194.o
-
+obj-$(CONFIG_HTE_TEGRA194_TEST) += hte-tegra194-test.o
diff --git a/drivers/hte/hte-tegra194-test.c b/drivers/hte/hte-tegra194-test.c
new file mode 100644
index 000000000000..0682d972fb5a
--- /dev/null
+++ b/drivers/hte/hte-tegra194-test.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021-2022 NVIDIA Corporation
+ *
+ * Author: Dipen Patel <[email protected]>
+ */
+
+#include <linux/version.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/timer.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/hte.h>
+
+/*
+ * This sample HTE GPIO test driver demonstrates HTE API usage by enabling
+ * hardware timestamp on gpio_in and specified LIC IRQ lines.
+ *
+ * Note: gpio_out and gpio_in need to be shorted externally in order for this
+ * test driver to work for the GPIO monitoring. The test driver has been
+ * tested on Jetson AGX Xavier platform by shorting pin 32 and 16 on 40 pin
+ * header.
+ *
+ * Device tree snippet to activate this driver:
+ * tegra_hte_test {
+ * compatible = "nvidia,tegra194-hte-test";
+ * in-gpio = <&gpio_aon TEGRA194_AON_GPIO(BB, 1)>;
+ * out-gpio = <&gpio_aon TEGRA194_AON_GPIO(BB, 0)>;
+ * timestamps = <&tegra_hte_aon TEGRA194_AON_GPIO(BB, 1)>,
+ * <&tegra_hte_lic 0x19>;
+ * timestamp-names = "hte-gpio", "hte-i2c-irq";
+ * status = "okay";
+ * };
+ *
+ * How to run test driver:
+ * - Load test driver.
+ * - For the GPIO, at regular interval gpio_out pin toggles triggering
+ * HTE for rising edge on gpio_in pin.
+ *
+ * - For the LIC IRQ line, it uses 0x19 interrupt which is i2c controller 1.
+ * - Run i2cdetect -y 1 1>/dev/null, this command will generate i2c bus
+ * transactions which creates timestamp data.
+ * - It prints below message for both the lines.
+ * HW timestamp(<line id>:<ts seq number>): <timestamp>, edge: <edge>.
+ * - Unloading the driver disables and deallocate the HTE.
+ */
+
+static struct tegra_hte_test {
+ int gpio_in_irq;
+ struct device *pdev;
+ struct gpio_desc *gpio_in;
+ struct gpio_desc *gpio_out;
+ struct hte_ts_desc *desc;
+ struct timer_list timer;
+ struct kobject *kobj;
+} hte;
+
+static hte_return_t process_hw_ts(struct hte_ts_data *ts, void *p)
+{
+ char *edge;
+ struct hte_ts_desc *desc = p;
+
+ if (!ts || !p)
+ return HTE_CB_HANDLED;
+
+ if (ts->raw_level < 0)
+ edge = "Unknown";
+
+ pr_info("HW timestamp(%u: %llu): %llu, edge: %s\n",
+ desc->attr.line_id, ts->seq, ts->tsc,
+ (ts->raw_level >= 0) ? ((ts->raw_level == 0) ?
+ "falling" : "rising") : edge);
+
+ return HTE_CB_HANDLED;
+}
+
+static void gpio_timer_cb(struct timer_list *t)
+{
+ (void)t;
+
+ gpiod_set_value(hte.gpio_out, !gpiod_get_value(hte.gpio_out));
+ mod_timer(&hte.timer, jiffies + msecs_to_jiffies(8000));
+}
+
+static irqreturn_t tegra_hte_test_gpio_isr(int irq, void *data)
+{
+ (void)irq;
+ (void)data;
+
+ return IRQ_HANDLED;
+}
+
+static const struct of_device_id tegra_hte_test_of_match[] = {
+ { .compatible = "nvidia,tegra194-hte-test"},
+ { }
+};
+MODULE_DEVICE_TABLE(of, tegra_hte_test_of_match);
+
+static int tegra_hte_test_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ int i, cnt;
+
+ dev_set_drvdata(&pdev->dev, &hte);
+ hte.pdev = &pdev->dev;
+
+ hte.gpio_out = gpiod_get(&pdev->dev, "out", 0);
+ if (IS_ERR(hte.gpio_out)) {
+ dev_err(&pdev->dev, "failed to get gpio out\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ hte.gpio_in = gpiod_get(&pdev->dev, "in", 0);
+ if (IS_ERR(hte.gpio_in)) {
+ dev_err(&pdev->dev, "failed to get gpio in\n");
+ ret = -EINVAL;
+ goto free_gpio_out;
+ }
+
+ ret = gpiod_direction_output(hte.gpio_out, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set output\n");
+ ret = -EINVAL;
+ goto free_gpio_in;
+ }
+
+ ret = gpiod_direction_input(hte.gpio_in);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set input\n");
+ ret = -EINVAL;
+ goto free_gpio_in;
+ }
+
+ ret = gpiod_to_irq(hte.gpio_in);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to map GPIO to IRQ: %d\n", ret);
+ ret = -ENXIO;
+ goto free_gpio_in;
+ }
+
+ hte.gpio_in_irq = ret;
+ ret = request_irq(ret, tegra_hte_test_gpio_isr,
+ IRQF_TRIGGER_RISING,
+ "tegra_hte_gpio_test_isr", &hte);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to acquire IRQ\n");
+ ret = -ENXIO;
+ goto free_irq;
+ }
+
+ cnt = of_hte_req_count(hte.pdev);
+ if (cnt < 0)
+ goto free_irq;
+
+ dev_info(&pdev->dev, "Total requested lines:%d\n", cnt);
+
+ hte.desc = devm_kzalloc(hte.pdev, sizeof(*hte.desc) * cnt, GFP_KERNEL);
+ if (!hte.desc) {
+ ret = -ENOMEM;
+ goto free_irq;
+ }
+
+ for (i = 0; i < cnt; i++) {
+ if (i == 0)
+ /*
+ * GPIO hte init, line_id and name will be parsed from
+ * the device tree node. The edge_flag is implicitly
+ * set by request_irq call. Only line_data is needed to be
+ * set.
+ */
+ hte_init_line_attr(&hte.desc[i], 0, 0, NULL,
+ hte.gpio_in);
+ else
+ /*
+ * same comment as above except that IRQ does not need
+ * line data.
+ */
+ hte_init_line_attr(&hte.desc[i], 0, 0, NULL, NULL);
+
+ ret = hte_ts_get(hte.pdev, &hte.desc[i], i);
+ if (ret)
+ goto ts_put;
+
+ ret = devm_hte_request_ts_ns(hte.pdev, &hte.desc[i],
+ process_hw_ts, NULL,
+ &hte.desc[i]);
+ if (ret) /* no need to ts_put, request API takes care */
+ goto free_irq;
+ }
+
+ timer_setup(&hte.timer, gpio_timer_cb, 0);
+ mod_timer(&hte.timer, jiffies + msecs_to_jiffies(5000));
+
+ return 0;
+
+ts_put:
+ cnt = i;
+ for (i = 0; i < cnt; i++)
+ hte_ts_put(&hte.desc[i]);
+free_irq:
+ free_irq(hte.gpio_in_irq, &hte);
+free_gpio_in:
+ gpiod_put(hte.gpio_in);
+free_gpio_out:
+ gpiod_put(hte.gpio_out);
+out:
+
+ return ret;
+}
+
+static int tegra_hte_test_remove(struct platform_device *pdev)
+{
+ (void)pdev;
+
+ free_irq(hte.gpio_in_irq, &hte);
+ gpiod_put(hte.gpio_in);
+ gpiod_put(hte.gpio_out);
+ del_timer(&hte.timer);
+
+ return 0;
+}
+
+static struct platform_driver tegra_hte_test_driver = {
+ .probe = tegra_hte_test_probe,
+ .remove = tegra_hte_test_remove,
+ .driver = {
+ .name = "tegra_hte_test",
+ .of_match_table = tegra_hte_test_of_match,
+ },
+};
+module_platform_driver(tegra_hte_test_driver);
+
+MODULE_AUTHOR("Dipen Patel <[email protected]>");
+MODULE_LICENSE("GPL v2");
--
2.17.1