Add GSC support for XeHP SDV and DG2 platforms.
The series includes changes for the mei driver:
- add ability to use polling instead of interrupts
- add ability to use extended timeouts
- setup extended operational memory for GSC
The series includes changes for the i915 driver:
- allocate extended operational memory for GSC
- GSC on XeHP SDV offsets and definitions
Greg KH, please review and ACK the MEI patches.
We are pushing these patches through gfx tree as
the auxiliary device belongs there.
V2: rebase over merged DG1 series and DG2 enablement patch,
fix commit messages
Alexander Usyskin (5):
drm/i915/gsc: add slow_fw flag to the mei auxiliary device
drm/i915/gsc: add slow_fw flag to the gsc device definition
drm/i915/gsc: add GSC XeHP SDV platform definition
mei: gsc: wait for reset thread on stop
mei: extend timeouts on slow devices.
Daniele Ceraolo Spurio (1):
HAX: drm/i915: force INTEL_MEI_GSC on for CI
Tomas Winkler (5):
mei: gsc: use polling instead of interrupts
mei: mkhi: add memory ready command
mei: gsc: setup gsc extended operational memory
mei: debugfs: add pxp mode to devstate in debugfs
drm/i915/gsc: allocate extended operational memory in LMEM
Vitaly Lubart (3):
drm/i915/gsc: skip irq initialization if using polling
mei: bus: export common mkhi definitions into a separate header
mei: gsc: add transition to PXP mode in resume flow
drivers/gpu/drm/i915/Kconfig.debug | 1 +
drivers/gpu/drm/i915/gt/intel_gsc.c | 119 +++++++++++++++++++++++++---
drivers/gpu/drm/i915/gt/intel_gsc.h | 3 +
drivers/misc/mei/bus-fixup.c | 105 ++++++++++++++++--------
drivers/misc/mei/client.c | 14 ++--
drivers/misc/mei/debugfs.c | 17 ++++
drivers/misc/mei/gsc-me.c | 77 +++++++++++++++---
drivers/misc/mei/hbm.c | 12 +--
drivers/misc/mei/hw-me-regs.h | 7 ++
drivers/misc/mei/hw-me.c | 116 ++++++++++++++++++++++-----
drivers/misc/mei/hw-me.h | 14 +++-
drivers/misc/mei/hw-txe.c | 2 +-
drivers/misc/mei/hw.h | 5 ++
drivers/misc/mei/init.c | 21 ++++-
drivers/misc/mei/main.c | 2 +-
drivers/misc/mei/mei_dev.h | 26 ++++++
drivers/misc/mei/mkhi.h | 57 +++++++++++++
drivers/misc/mei/pci-me.c | 2 +-
include/linux/mei_aux.h | 2 +
19 files changed, 511 insertions(+), 91 deletions(-)
create mode 100644 drivers/misc/mei/mkhi.h
--
2.32.0
From: Tomas Winkler <[email protected]>
1. Retrieve extended operational memory physical pointers from the
auxiliary device info.
2. Setup memory registers.
3. Notify firmware that the memory is ready by sending the memory
ready command.
4. Disable PXP device if GSC is not in PXP mode.
CC: Daniele Ceraolo Spurio <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: Alexander Usyskin <[email protected]>
---
drivers/misc/mei/bus-fixup.c | 70 ++++++++++++++++++++++++++++++++++-
drivers/misc/mei/gsc-me.c | 16 ++++++++
drivers/misc/mei/hw-me-regs.h | 7 ++++
drivers/misc/mei/hw-me.c | 28 +++++++++++++-
drivers/misc/mei/mei_dev.h | 10 +++++
include/linux/mei_aux.h | 1 +
6 files changed, 129 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c
index 190691abddc9..d2929f68604d 100644
--- a/drivers/misc/mei/bus-fixup.c
+++ b/drivers/misc/mei/bus-fixup.c
@@ -189,6 +189,19 @@ static int mei_fwver(struct mei_cl_device *cldev)
return ret;
}
+static int mei_gfx_memory_ready(struct mei_cl_device *cldev)
+{
+ struct mkhi_gfx_mem_ready req = {0};
+ unsigned int mode = MEI_CL_IO_TX_INTERNAL;
+
+ req.hdr.group_id = MKHI_GROUP_ID_GFX;
+ req.hdr.command = MKHI_GFX_MEMORY_READY_CMD_REQ;
+ req.flags = MKHI_GFX_MEM_READY_PXP_ALLOWED;
+
+ dev_dbg(&cldev->dev, "Sending memory ready command\n");
+ return __mei_cl_send(cldev->cl, (u8 *)&req, sizeof(req), 0, mode);
+}
+
static void mei_mkhi_fix(struct mei_cl_device *cldev)
{
int ret;
@@ -235,6 +248,39 @@ static void mei_gsc_mkhi_ver(struct mei_cl_device *cldev)
dev_err(&cldev->dev, "FW version command failed %d\n", ret);
mei_cldev_disable(cldev);
}
+
+static void mei_gsc_mkhi_fix_ver(struct mei_cl_device *cldev)
+{
+ int ret;
+
+ /* No need to enable the client if nothing is needed from it */
+ if (!cldev->bus->fw_f_fw_ver_supported &&
+ (cldev->bus->pxp_mode != MEI_DEV_PXP_INIT))
+ return;
+
+ ret = mei_cldev_enable(cldev);
+ if (ret)
+ return;
+
+ if (cldev->bus->pxp_mode == MEI_DEV_PXP_INIT) {
+ ret = mei_gfx_memory_ready(cldev);
+ if (ret < 0)
+ dev_err(&cldev->dev, "memory ready command failed %d\n", ret);
+ else
+ dev_dbg(&cldev->dev, "memory ready command sent\n");
+ /* we go to reset after that */
+ cldev->bus->pxp_mode = MEI_DEV_PXP_SETUP;
+ goto out;
+ }
+
+ ret = mei_fwver(cldev);
+ if (ret < 0)
+ dev_err(&cldev->dev, "FW version command failed %d\n",
+ ret);
+out:
+ mei_cldev_disable(cldev);
+}
+
/**
* mei_wd - wd client on the bus, change protocol version
* as the API has changed.
@@ -474,6 +520,26 @@ static void vt_support(struct mei_cl_device *cldev)
cldev->do_match = 1;
}
+/**
+ * pxp_isready - enable bus client if pxp is ready
+ *
+ * @cldev: me clients device
+ */
+static void pxp_isready(struct mei_cl_device *cldev)
+{
+ struct mei_device *bus = cldev->bus;
+
+ switch (bus->pxp_mode) {
+ case MEI_DEV_PXP_READY:
+ case MEI_DEV_PXP_DEFAULT:
+ cldev->do_match = 1;
+ break;
+ default:
+ cldev->do_match = 0;
+ break;
+ }
+}
+
#define MEI_FIXUP(_uuid, _hook) { _uuid, _hook }
static struct mei_fixup {
@@ -487,10 +553,10 @@ static struct mei_fixup {
MEI_FIXUP(MEI_UUID_WD, mei_wd),
MEI_FIXUP(MEI_UUID_MKHIF_FIX, mei_mkhi_fix),
MEI_FIXUP(MEI_UUID_IGSC_MKHI, mei_gsc_mkhi_ver),
- MEI_FIXUP(MEI_UUID_IGSC_MKHI_FIX, mei_gsc_mkhi_ver),
+ MEI_FIXUP(MEI_UUID_IGSC_MKHI_FIX, mei_gsc_mkhi_fix_ver),
MEI_FIXUP(MEI_UUID_HDCP, whitelist),
MEI_FIXUP(MEI_UUID_ANY, vt_support),
- MEI_FIXUP(MEI_UUID_PAVP, whitelist),
+ MEI_FIXUP(MEI_UUID_PAVP, pxp_isready),
};
/**
diff --git a/drivers/misc/mei/gsc-me.c b/drivers/misc/mei/gsc-me.c
index 4f6c916282b7..c8a167b57cc9 100644
--- a/drivers/misc/mei/gsc-me.c
+++ b/drivers/misc/mei/gsc-me.c
@@ -32,6 +32,17 @@ static int mei_gsc_read_hfs(const struct mei_device *dev, int where, u32 *val)
return 0;
}
+static void mei_gsc_set_ext_op_mem(const struct mei_me_hw *hw, struct resource *mem)
+{
+ u32 low = lower_32_bits(mem->start);
+ u32 hi = upper_32_bits(mem->start);
+ u32 limit = (resource_size(mem) / SZ_4K) | GSC_EXT_OP_MEM_VALID;
+
+ iowrite32(low, hw->mem_addr + H_GSC_EXT_OP_MEM_BASE_ADDR_LO_REG);
+ iowrite32(hi, hw->mem_addr + H_GSC_EXT_OP_MEM_BASE_ADDR_HI_REG);
+ iowrite32(limit, hw->mem_addr + H_GSC_EXT_OP_MEM_LIMIT_REG);
+}
+
static int mei_gsc_probe(struct auxiliary_device *aux_dev,
const struct auxiliary_device_id *aux_dev_id)
{
@@ -67,6 +78,11 @@ static int mei_gsc_probe(struct auxiliary_device *aux_dev,
dev_set_drvdata(device, dev);
+ if (adev->ext_op_mem.start) {
+ mei_gsc_set_ext_op_mem(hw, &adev->ext_op_mem);
+ dev->pxp_mode = MEI_DEV_PXP_INIT;
+ }
+
/* use polling */
if (mei_me_hw_use_polling(hw)) {
mei_disable_interrupts(dev);
diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
index 64ce3f830262..8bbe3e9f1269 100644
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -125,6 +125,8 @@
# define PCI_CFG_HFS_3_FW_SKU_SPS 0x00000060
#define PCI_CFG_HFS_4 0x64
#define PCI_CFG_HFS_5 0x68
+# define GSC_CFG_HFS_5_BOOT_TYPE_MSK 0x00000003
+# define GSC_CFG_HFS_5_BOOT_TYPE_PXP 3
#define PCI_CFG_HFS_6 0x6C
/* MEI registers */
@@ -141,6 +143,11 @@
/* H_D0I3C - D0I3 Control */
#define H_D0I3C 0x800
+#define H_GSC_EXT_OP_MEM_BASE_ADDR_LO_REG 0x100
+#define H_GSC_EXT_OP_MEM_BASE_ADDR_HI_REG 0x104
+#define H_GSC_EXT_OP_MEM_LIMIT_REG 0x108
+#define GSC_EXT_OP_MEM_VALID BIT(31)
+
/* register bits of H_CSR (Host Control Status register) */
/* Host Circular Buffer Depth - maximum number of 32-bit entries in CB */
#define H_CBD 0xFF000000
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
index 93d8b6dcedda..b70a36021fc4 100644
--- a/drivers/misc/mei/hw-me.c
+++ b/drivers/misc/mei/hw-me.c
@@ -433,6 +433,29 @@ static bool mei_me_hw_is_resetting(struct mei_device *dev)
return (mecsr & ME_RST_HRA) == ME_RST_HRA;
}
+/**
+ * mei_gsc_pxp_check - check for gsc firmware entering pxp mode
+ *
+ * @dev: the device structure
+ */
+static void mei_gsc_pxp_check(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 fwsts5 = 0;
+
+ if (dev->pxp_mode == MEI_DEV_PXP_DEFAULT)
+ return;
+
+ hw->read_fws(dev, PCI_CFG_HFS_5, &fwsts5);
+ trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_5", PCI_CFG_HFS_5, fwsts5);
+ if ((fwsts5 & GSC_CFG_HFS_5_BOOT_TYPE_MSK) == GSC_CFG_HFS_5_BOOT_TYPE_PXP) {
+ dev_dbg(dev->dev, "pxp mode is ready 0x%08x\n", fwsts5);
+ dev->pxp_mode = MEI_DEV_PXP_READY;
+ } else {
+ dev_dbg(dev->dev, "pxp mode is not ready 0x%08x\n", fwsts5);
+ }
+}
+
/**
* mei_me_hw_ready_wait - wait until the me(hw) has turned ready
* or timeout is reached
@@ -452,6 +475,8 @@ static int mei_me_hw_ready_wait(struct mei_device *dev)
return -ETIME;
}
+ mei_gsc_pxp_check(dev);
+
mei_me_hw_reset_release(dev);
dev->recvd_hw_ready = false;
return 0;
@@ -1268,7 +1293,8 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
/* check if ME wants a reset */
if (!mei_hw_is_ready(dev) && dev->dev_state != MEI_DEV_RESETTING) {
- dev_warn(dev->dev, "FW not ready: resetting.\n");
+ dev_warn(dev->dev, "FW not ready: resetting: dev_state = %d pxp = %d\n",
+ dev->dev_state, dev->pxp_mode);
if (dev->dev_state == MEI_DEV_POWERING_DOWN ||
dev->dev_state == MEI_DEV_POWER_DOWN)
mei_cl_all_disconnect(dev);
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index 16f59b3a45fc..7c508bca9a00 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -62,6 +62,14 @@ enum mei_dev_state {
MEI_DEV_POWER_UP
};
+/* MEI PXP mode state */
+enum mei_dev_pxp_mode {
+ MEI_DEV_PXP_DEFAULT = 0,
+ MEI_DEV_PXP_INIT = 1,
+ MEI_DEV_PXP_SETUP = 2,
+ MEI_DEV_PXP_READY = 3,
+};
+
const char *mei_dev_state_str(int state);
enum mei_file_transaction_states {
@@ -454,6 +462,7 @@ struct mei_dev_timeouts {
* @reset_count : number of consecutive resets
* @dev_state : device state
* @hbm_state : state of host bus message protocol
+ * @pxp_mode : PXP device mode
* @init_clients_timer : HBM init handshake timeout
*
* @pg_event : power gating event
@@ -537,6 +546,7 @@ struct mei_device {
unsigned long reset_count;
enum mei_dev_state dev_state;
enum mei_hbm_state hbm_state;
+ enum mei_dev_pxp_mode pxp_mode;
u16 init_clients_timer;
/*
diff --git a/include/linux/mei_aux.h b/include/linux/mei_aux.h
index a29f4064b9c0..c3fc137a2aba 100644
--- a/include/linux/mei_aux.h
+++ b/include/linux/mei_aux.h
@@ -11,6 +11,7 @@ struct mei_aux_device {
struct auxiliary_device aux_dev;
int irq;
struct resource bar;
+ struct resource ext_op_mem;
bool slow_fw;
};
--
2.32.0
Define GSC on XeHP SDV (Intel(R) dGPU without display)
XeHP SDV uses the same hardware settings as DG1, but uses polling
instead of interrupts and runs the firmware in slow pace due to
hardware limitations.
Signed-off-by: Vitaly Lubart <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: Alexander Usyskin <[email protected]>
---
drivers/gpu/drm/i915/gt/intel_gsc.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/gpu/drm/i915/gt/intel_gsc.c b/drivers/gpu/drm/i915/gt/intel_gsc.c
index f963c220bbff..bfc307e49bf9 100644
--- a/drivers/gpu/drm/i915/gt/intel_gsc.c
+++ b/drivers/gpu/drm/i915/gt/intel_gsc.c
@@ -56,6 +56,19 @@ static const struct gsc_def gsc_def_dg1[] = {
}
};
+static const struct gsc_def gsc_def_xehpsdv[] = {
+ {
+ /* HECI1 not enabled on the device. */
+ },
+ {
+ .name = "mei-gscfi",
+ .bar = DG1_GSC_HECI2_BASE,
+ .bar_size = GSC_BAR_LENGTH,
+ .use_polling = true,
+ .slow_fw = true,
+ }
+};
+
static const struct gsc_def gsc_def_dg2[] = {
{
.name = "mei-gsc",
@@ -107,6 +120,8 @@ static void gsc_init_one(struct drm_i915_private *i915,
if (IS_DG1(i915)) {
def = &gsc_def_dg1[intf_id];
+ } else if (IS_XEHPSDV(i915)) {
+ def = &gsc_def_xehpsdv[intf_id];
} else if (IS_DG2(i915)) {
def = &gsc_def_dg2[intf_id];
} else {
--
2.32.0
From: Daniele Ceraolo Spurio <[email protected]>
After the new config option is merged we'll enable it by default in the
CI config, but for now just force it on via the i915 Kconfig so we can
get pre-merge CI results for it.
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
---
drivers/gpu/drm/i915/Kconfig.debug | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/i915/Kconfig.debug b/drivers/gpu/drm/i915/Kconfig.debug
index e7fd3e76f8a2..be4ef485d6c1 100644
--- a/drivers/gpu/drm/i915/Kconfig.debug
+++ b/drivers/gpu/drm/i915/Kconfig.debug
@@ -48,6 +48,7 @@ config DRM_I915_DEBUG
select DRM_I915_DEBUG_RUNTIME_PM
select DRM_I915_SW_FENCE_DEBUG_OBJECTS
select DRM_I915_SELFTEST
+ select INTEL_MEI_GSC
select BROKEN # for prototype uAPI
default n
help
--
2.32.0
Parametrize operational timeouts in order
to support slow firmware on some graphic devices.
Signed-off-by: Alexander Usyskin <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
---
drivers/misc/mei/bus-fixup.c | 3 +--
drivers/misc/mei/client.c | 14 +++++++-------
drivers/misc/mei/gsc-me.c | 2 +-
drivers/misc/mei/hbm.c | 12 ++++++------
drivers/misc/mei/hw-me.c | 30 ++++++++++++++++--------------
drivers/misc/mei/hw-me.h | 2 +-
drivers/misc/mei/hw-txe.c | 2 +-
drivers/misc/mei/hw.h | 5 +++++
drivers/misc/mei/init.c | 19 ++++++++++++++++++-
drivers/misc/mei/main.c | 2 +-
drivers/misc/mei/mei_dev.h | 16 ++++++++++++++++
drivers/misc/mei/pci-me.c | 2 +-
12 files changed, 74 insertions(+), 35 deletions(-)
diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c
index 59506ba6fc48..24e91a9ea558 100644
--- a/drivers/misc/mei/bus-fixup.c
+++ b/drivers/misc/mei/bus-fixup.c
@@ -164,7 +164,6 @@ static int mei_osver(struct mei_cl_device *cldev)
sizeof(struct mkhi_fw_ver))
#define MKHI_FWVER_LEN(__num) (sizeof(struct mkhi_msg_hdr) + \
sizeof(struct mkhi_fw_ver_block) * (__num))
-#define MKHI_RCV_TIMEOUT 500 /* receive timeout in msec */
static int mei_fwver(struct mei_cl_device *cldev)
{
char buf[MKHI_FWVER_BUF_LEN];
@@ -187,7 +186,7 @@ static int mei_fwver(struct mei_cl_device *cldev)
ret = 0;
bytes_recv = __mei_cl_recv(cldev->cl, buf, sizeof(buf), NULL, 0,
- MKHI_RCV_TIMEOUT);
+ cldev->bus->timeouts.mkhi_recv);
if (bytes_recv < 0 || (size_t)bytes_recv < MKHI_FWVER_LEN(1)) {
/*
* Should be at least one version block,
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 31264ab2eb13..e7a16d9b2241 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -870,7 +870,7 @@ static int mei_cl_send_disconnect(struct mei_cl *cl, struct mei_cl_cb *cb)
}
list_move_tail(&cb->list, &dev->ctrl_rd_list);
- cl->timer_count = MEI_CONNECT_TIMEOUT;
+ cl->timer_count = dev->timeouts.connect;
mei_schedule_stall_timer(dev);
return 0;
@@ -945,7 +945,7 @@ static int __mei_cl_disconnect(struct mei_cl *cl)
wait_event_timeout(cl->wait,
cl->state == MEI_FILE_DISCONNECT_REPLY ||
cl->state == MEI_FILE_DISCONNECTED,
- mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+ dev->timeouts.cl_connect);
mutex_lock(&dev->device_lock);
rets = cl->status;
@@ -1065,7 +1065,7 @@ static int mei_cl_send_connect(struct mei_cl *cl, struct mei_cl_cb *cb)
}
list_move_tail(&cb->list, &dev->ctrl_rd_list);
- cl->timer_count = MEI_CONNECT_TIMEOUT;
+ cl->timer_count = dev->timeouts.connect;
mei_schedule_stall_timer(dev);
return 0;
}
@@ -1164,7 +1164,7 @@ int mei_cl_connect(struct mei_cl *cl, struct mei_me_client *me_cl,
cl->state == MEI_FILE_DISCONNECTED ||
cl->state == MEI_FILE_DISCONNECT_REQUIRED ||
cl->state == MEI_FILE_DISCONNECT_REPLY),
- mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+ dev->timeouts.cl_connect);
mutex_lock(&dev->device_lock);
if (!mei_cl_is_connected(cl)) {
@@ -1562,7 +1562,7 @@ int mei_cl_notify_request(struct mei_cl *cl,
cl->notify_en == request ||
cl->status ||
!mei_cl_is_connected(cl),
- mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+ dev->timeouts.cl_connect);
mutex_lock(&dev->device_lock);
if (cl->notify_en != request && !cl->status)
@@ -2336,7 +2336,7 @@ int mei_cl_dma_alloc_and_map(struct mei_cl *cl, const struct file *fp,
mutex_unlock(&dev->device_lock);
wait_event_timeout(cl->wait,
cl->dma_mapped || cl->status,
- mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+ dev->timeouts.cl_connect);
mutex_lock(&dev->device_lock);
if (!cl->dma_mapped && !cl->status)
@@ -2415,7 +2415,7 @@ int mei_cl_dma_unmap(struct mei_cl *cl, const struct file *fp)
mutex_unlock(&dev->device_lock);
wait_event_timeout(cl->wait,
!cl->dma_mapped || cl->status,
- mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+ dev->timeouts.cl_connect);
mutex_lock(&dev->device_lock);
if (cl->dma_mapped && !cl->status)
diff --git a/drivers/misc/mei/gsc-me.c b/drivers/misc/mei/gsc-me.c
index 2caba3a9ac35..4f6c916282b7 100644
--- a/drivers/misc/mei/gsc-me.c
+++ b/drivers/misc/mei/gsc-me.c
@@ -48,7 +48,7 @@ static int mei_gsc_probe(struct auxiliary_device *aux_dev,
device = &aux_dev->dev;
- dev = mei_me_dev_init(device, cfg);
+ dev = mei_me_dev_init(device, cfg, adev->slow_fw);
if (!dev) {
ret = -ENOMEM;
goto err;
diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c
index cebcca6d6d3e..4ff4dbfd07c0 100644
--- a/drivers/misc/mei/hbm.c
+++ b/drivers/misc/mei/hbm.c
@@ -232,7 +232,7 @@ int mei_hbm_start_wait(struct mei_device *dev)
mutex_unlock(&dev->device_lock);
ret = wait_event_timeout(dev->wait_hbm_start,
dev->hbm_state != MEI_HBM_STARTING,
- mei_secs_to_jiffies(MEI_HBM_TIMEOUT));
+ dev->timeouts.hbm);
mutex_lock(&dev->device_lock);
if (ret == 0 && (dev->hbm_state <= MEI_HBM_STARTING)) {
@@ -275,7 +275,7 @@ int mei_hbm_start_req(struct mei_device *dev)
}
dev->hbm_state = MEI_HBM_STARTING;
- dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
+ dev->init_clients_timer = dev->timeouts.client_init;
mei_schedule_stall_timer(dev);
return 0;
}
@@ -316,7 +316,7 @@ static int mei_hbm_dma_setup_req(struct mei_device *dev)
}
dev->hbm_state = MEI_HBM_DR_SETUP;
- dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
+ dev->init_clients_timer = dev->timeouts.client_init;
mei_schedule_stall_timer(dev);
return 0;
}
@@ -351,7 +351,7 @@ static int mei_hbm_capabilities_req(struct mei_device *dev)
}
dev->hbm_state = MEI_HBM_CAP_SETUP;
- dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
+ dev->init_clients_timer = dev->timeouts.client_init;
mei_schedule_stall_timer(dev);
return 0;
}
@@ -385,7 +385,7 @@ static int mei_hbm_enum_clients_req(struct mei_device *dev)
return ret;
}
dev->hbm_state = MEI_HBM_ENUM_CLIENTS;
- dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
+ dev->init_clients_timer = dev->timeouts.client_init;
mei_schedule_stall_timer(dev);
return 0;
}
@@ -751,7 +751,7 @@ static int mei_hbm_prop_req(struct mei_device *dev, unsigned long start_idx)
return ret;
}
- dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
+ dev->init_clients_timer = dev->timeouts.client_init;
mei_schedule_stall_timer(dev);
return 0;
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
index 959b3329af60..93d8b6dcedda 100644
--- a/drivers/misc/mei/hw-me.c
+++ b/drivers/misc/mei/hw-me.c
@@ -445,7 +445,7 @@ static int mei_me_hw_ready_wait(struct mei_device *dev)
mutex_unlock(&dev->device_lock);
wait_event_timeout(dev->wait_hw_ready,
dev->recvd_hw_ready,
- mei_secs_to_jiffies(MEI_HW_READY_TIMEOUT));
+ dev->timeouts.hw_ready);
mutex_lock(&dev->device_lock);
if (!dev->recvd_hw_ready) {
dev_err(dev->dev, "wait hw ready failed\n");
@@ -707,7 +707,6 @@ static void mei_me_pg_unset(struct mei_device *dev)
static int mei_me_pg_legacy_enter_sync(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
- unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
int ret;
dev->pg_event = MEI_PG_EVENT_WAIT;
@@ -718,7 +717,8 @@ static int mei_me_pg_legacy_enter_sync(struct mei_device *dev)
mutex_unlock(&dev->device_lock);
wait_event_timeout(dev->wait_pg,
- dev->pg_event == MEI_PG_EVENT_RECEIVED, timeout);
+ dev->pg_event == MEI_PG_EVENT_RECEIVED,
+ dev->timeouts.pgi);
mutex_lock(&dev->device_lock);
if (dev->pg_event == MEI_PG_EVENT_RECEIVED) {
@@ -744,7 +744,6 @@ static int mei_me_pg_legacy_enter_sync(struct mei_device *dev)
static int mei_me_pg_legacy_exit_sync(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
- unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
int ret;
if (dev->pg_event == MEI_PG_EVENT_RECEIVED)
@@ -756,7 +755,8 @@ static int mei_me_pg_legacy_exit_sync(struct mei_device *dev)
mutex_unlock(&dev->device_lock);
wait_event_timeout(dev->wait_pg,
- dev->pg_event == MEI_PG_EVENT_RECEIVED, timeout);
+ dev->pg_event == MEI_PG_EVENT_RECEIVED,
+ dev->timeouts.pgi);
mutex_lock(&dev->device_lock);
reply:
@@ -772,7 +772,8 @@ static int mei_me_pg_legacy_exit_sync(struct mei_device *dev)
mutex_unlock(&dev->device_lock);
wait_event_timeout(dev->wait_pg,
- dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, timeout);
+ dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED,
+ dev->timeouts.pgi);
mutex_lock(&dev->device_lock);
if (dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED)
@@ -887,8 +888,6 @@ static u32 mei_me_d0i3_unset(struct mei_device *dev)
static int mei_me_d0i3_enter_sync(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
- unsigned long d0i3_timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT);
- unsigned long pgi_timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
int ret;
u32 reg;
@@ -910,7 +909,8 @@ static int mei_me_d0i3_enter_sync(struct mei_device *dev)
mutex_unlock(&dev->device_lock);
wait_event_timeout(dev->wait_pg,
- dev->pg_event == MEI_PG_EVENT_RECEIVED, pgi_timeout);
+ dev->pg_event == MEI_PG_EVENT_RECEIVED,
+ dev->timeouts.pgi);
mutex_lock(&dev->device_lock);
if (dev->pg_event != MEI_PG_EVENT_RECEIVED) {
@@ -930,7 +930,8 @@ static int mei_me_d0i3_enter_sync(struct mei_device *dev)
mutex_unlock(&dev->device_lock);
wait_event_timeout(dev->wait_pg,
- dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, d0i3_timeout);
+ dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED,
+ dev->timeouts.d0i3);
mutex_lock(&dev->device_lock);
if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) {
@@ -990,7 +991,6 @@ static int mei_me_d0i3_enter(struct mei_device *dev)
static int mei_me_d0i3_exit_sync(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
- unsigned long timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT);
int ret;
u32 reg;
@@ -1013,7 +1013,8 @@ static int mei_me_d0i3_exit_sync(struct mei_device *dev)
mutex_unlock(&dev->device_lock);
wait_event_timeout(dev->wait_pg,
- dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, timeout);
+ dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED,
+ dev->timeouts.pgi);
mutex_lock(&dev->device_lock);
if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) {
@@ -1684,11 +1685,12 @@ EXPORT_SYMBOL_GPL(mei_me_get_cfg);
*
* @parent: device associated with physical device (pci/platform)
* @cfg: per device generation config
+ * @slow_fw: configure longer timeouts as FW is slow
*
* Return: The mei_device pointer on success, NULL on failure.
*/
struct mei_device *mei_me_dev_init(struct device *parent,
- const struct mei_cfg *cfg)
+ const struct mei_cfg *cfg, bool slow_fw)
{
struct mei_device *dev;
struct mei_me_hw *hw;
@@ -1703,7 +1705,7 @@ struct mei_device *mei_me_dev_init(struct device *parent,
for (i = 0; i < DMA_DSCR_NUM; i++)
dev->dr_dscr[i].size = cfg->dma_size[i];
- mei_device_init(dev, parent, &mei_me_hw_ops);
+ mei_device_init(dev, parent, slow_fw, &mei_me_hw_ops);
hw->cfg = cfg;
dev->fw_f_fw_ver_supported = cfg->fw_ver_supported;
diff --git a/drivers/misc/mei/hw-me.h b/drivers/misc/mei/hw-me.h
index ca09274ac299..0e9d90808bcf 100644
--- a/drivers/misc/mei/hw-me.h
+++ b/drivers/misc/mei/hw-me.h
@@ -131,7 +131,7 @@ enum mei_cfg_idx {
const struct mei_cfg *mei_me_get_cfg(kernel_ulong_t idx);
struct mei_device *mei_me_dev_init(struct device *parent,
- const struct mei_cfg *cfg);
+ const struct mei_cfg *cfg, bool slow_fw);
int mei_me_pg_enter_sync(struct mei_device *dev);
int mei_me_pg_exit_sync(struct mei_device *dev);
diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c
index 00652c137cc7..fccfa806bd63 100644
--- a/drivers/misc/mei/hw-txe.c
+++ b/drivers/misc/mei/hw-txe.c
@@ -1201,7 +1201,7 @@ struct mei_device *mei_txe_dev_init(struct pci_dev *pdev)
if (!dev)
return NULL;
- mei_device_init(dev, &pdev->dev, &mei_txe_hw_ops);
+ mei_device_init(dev, &pdev->dev, false, &mei_txe_hw_ops);
hw = to_txe_hw(dev);
diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h
index b46077b17114..9381e5c13b4f 100644
--- a/drivers/misc/mei/hw.h
+++ b/drivers/misc/mei/hw.h
@@ -16,11 +16,16 @@
#define MEI_CONNECT_TIMEOUT 3 /* HPS: at least 2 seconds */
#define MEI_CL_CONNECT_TIMEOUT 15 /* HPS: Client Connect Timeout */
+#define MEI_CL_CONNECT_TIMEOUT_SLOW 30 /* HPS: Client Connect Timeout, slow FW */
#define MEI_CLIENTS_INIT_TIMEOUT 15 /* HPS: Clients Enumeration Timeout */
#define MEI_PGI_TIMEOUT 1 /* PG Isolation time response 1 sec */
#define MEI_D0I3_TIMEOUT 5 /* D0i3 set/unset max response time */
#define MEI_HBM_TIMEOUT 1 /* 1 second */
+#define MEI_HBM_TIMEOUT_SLOW 5 /* 5 second, slow FW */
+
+#define MKHI_RCV_TIMEOUT 500 /* receive timeout in msec */
+#define MKHI_RCV_TIMEOUT_SLOW 10000 /* receive timeout in msec, slow FW */
/*
* FW page size for DMA allocations
diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c
index 5bb6ba662cc0..ce030a882d0c 100644
--- a/drivers/misc/mei/init.c
+++ b/drivers/misc/mei/init.c
@@ -359,14 +359,16 @@ bool mei_write_is_idle(struct mei_device *dev)
EXPORT_SYMBOL_GPL(mei_write_is_idle);
/**
- * mei_device_init -- initialize mei_device structure
+ * mei_device_init - initialize mei_device structure
*
* @dev: the mei device
* @device: the device structure
+ * @slow_fw: configure longer timeouts as FW is slow
* @hw_ops: hw operations
*/
void mei_device_init(struct mei_device *dev,
struct device *device,
+ bool slow_fw,
const struct mei_hw_ops *hw_ops)
{
/* setup our list array */
@@ -404,6 +406,21 @@ void mei_device_init(struct mei_device *dev,
dev->pg_event = MEI_PG_EVENT_IDLE;
dev->ops = hw_ops;
dev->dev = device;
+
+ dev->timeouts.hw_ready = mei_secs_to_jiffies(MEI_HW_READY_TIMEOUT);
+ dev->timeouts.connect = MEI_CONNECT_TIMEOUT;
+ dev->timeouts.client_init = MEI_CLIENTS_INIT_TIMEOUT;
+ dev->timeouts.pgi = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
+ dev->timeouts.d0i3 = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT);
+ if (slow_fw) {
+ dev->timeouts.cl_connect = mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT_SLOW);
+ dev->timeouts.hbm = mei_secs_to_jiffies(MEI_HBM_TIMEOUT_SLOW);
+ dev->timeouts.mkhi_recv = msecs_to_jiffies(MKHI_RCV_TIMEOUT_SLOW);
+ } else {
+ dev->timeouts.cl_connect = mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT);
+ dev->timeouts.hbm = mei_secs_to_jiffies(MEI_HBM_TIMEOUT);
+ dev->timeouts.mkhi_recv = msecs_to_jiffies(MKHI_RCV_TIMEOUT);
+ }
}
EXPORT_SYMBOL_GPL(mei_device_init);
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index 786f7c8f7f61..261939b945ef 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -571,7 +571,7 @@ static int mei_ioctl_connect_vtag(struct file *file,
cl->state == MEI_FILE_DISCONNECTED ||
cl->state == MEI_FILE_DISCONNECT_REQUIRED ||
cl->state == MEI_FILE_DISCONNECT_REPLY),
- mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+ dev->timeouts.cl_connect);
mutex_lock(&dev->device_lock);
}
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index 694f866f87ef..16f59b3a45fc 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -415,6 +415,17 @@ struct mei_fw_version {
#define MEI_MAX_FW_VER_BLOCKS 3
+struct mei_dev_timeouts {
+ unsigned long hw_ready; /* Timeout on ready message, in jiffies */
+ int connect; /* HPS: at least 2 seconds, in seconds */
+ unsigned long cl_connect; /* HPS: Client Connect Timeout, in jiffies */
+ int client_init; /* HPS: Clients Enumeration Timeout, in seconds */
+ unsigned long pgi; /* PG Isolation time response, in jiffies */
+ unsigned int d0i3; /* D0i3 set/unset max response time, in jiffies */
+ unsigned long hbm; /* HBM operation timeout, in jiffies */
+ unsigned long mkhi_recv; /* receive timeout, in jiffies */
+};
+
/**
* struct mei_device - MEI private device struct
*
@@ -480,6 +491,8 @@ struct mei_fw_version {
* @allow_fixed_address: allow user space to connect a fixed client
* @override_fixed_address: force allow fixed address behavior
*
+ * @timeouts: actual timeout values
+ *
* @reset_work : work item for the device reset
* @bus_rescan_work : work item for the bus rescan
*
@@ -568,6 +581,8 @@ struct mei_device {
bool allow_fixed_address;
bool override_fixed_address;
+ struct mei_dev_timeouts timeouts;
+
struct work_struct reset_work;
struct work_struct bus_rescan_work;
@@ -632,6 +647,7 @@ static inline u32 mei_slots2data(int slots)
*/
void mei_device_init(struct mei_device *dev,
struct device *device,
+ bool slow_fw,
const struct mei_hw_ops *hw_ops);
int mei_reset(struct mei_device *dev);
int mei_start(struct mei_device *dev);
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 33e58821e478..0288784f8ffd 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -201,7 +201,7 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
/* allocates and initializes the mei dev structure */
- dev = mei_me_dev_init(&pdev->dev, cfg);
+ dev = mei_me_dev_init(&pdev->dev, cfg, false);
if (!dev) {
err = -ENOMEM;
goto end;
--
2.32.0
From: Vitaly Lubart <[email protected]>
Exported common mkhi definitions from bus-fixup.c into a separate
header file mkhi.h for other driver usage.
Signed-off-by: Vitaly Lubart <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
---
drivers/misc/mei/bus-fixup.c | 32 ++-----------------------
drivers/misc/mei/mkhi.h | 45 ++++++++++++++++++++++++++++++++++++
2 files changed, 47 insertions(+), 30 deletions(-)
create mode 100644 drivers/misc/mei/mkhi.h
diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c
index 24e91a9ea558..190691abddc9 100644
--- a/drivers/misc/mei/bus-fixup.c
+++ b/drivers/misc/mei/bus-fixup.c
@@ -15,6 +15,7 @@
#include "mei_dev.h"
#include "client.h"
+#include "mkhi.h"
#define MEI_UUID_NFC_INFO UUID_LE(0xd2de1625, 0x382d, 0x417d, \
0x48, 0xa4, 0xef, 0xab, 0xba, 0x8a, 0x12, 0x06)
@@ -80,6 +81,7 @@ static void whitelist(struct mei_cl_device *cldev)
}
#define OSTYPE_LINUX 2
+
struct mei_os_ver {
__le16 build;
__le16 reserved1;
@@ -89,20 +91,6 @@ struct mei_os_ver {
u8 reserved2;
} __packed;
-#define MKHI_FEATURE_PTT 0x10
-
-struct mkhi_rule_id {
- __le16 rule_type;
- u8 feature_id;
- u8 reserved;
-} __packed;
-
-struct mkhi_fwcaps {
- struct mkhi_rule_id id;
- u8 len;
- u8 data[];
-} __packed;
-
struct mkhi_fw_ver_block {
u16 minor;
u8 major;
@@ -115,22 +103,6 @@ struct mkhi_fw_ver {
struct mkhi_fw_ver_block ver[MEI_MAX_FW_VER_BLOCKS];
} __packed;
-#define MKHI_FWCAPS_GROUP_ID 0x3
-#define MKHI_FWCAPS_SET_OS_VER_APP_RULE_CMD 6
-#define MKHI_GEN_GROUP_ID 0xFF
-#define MKHI_GEN_GET_FW_VERSION_CMD 0x2
-struct mkhi_msg_hdr {
- u8 group_id;
- u8 command;
- u8 reserved;
- u8 result;
-} __packed;
-
-struct mkhi_msg {
- struct mkhi_msg_hdr hdr;
- u8 data[];
-} __packed;
-
#define MKHI_OSVER_BUF_LEN (sizeof(struct mkhi_msg_hdr) + \
sizeof(struct mkhi_fwcaps) + \
sizeof(struct mei_os_ver))
diff --git a/drivers/misc/mei/mkhi.h b/drivers/misc/mei/mkhi.h
new file mode 100644
index 000000000000..27a9b476904e
--- /dev/null
+++ b/drivers/misc/mei/mkhi.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003-2020, Intel Corporation. All rights reserved.
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ */
+
+#ifndef _MEI_MKHI_H_
+#define _MEI_MKHI_H_
+
+#include "mei_dev.h"
+
+#define MKHI_FEATURE_PTT 0x10
+
+#define MKHI_FWCAPS_GROUP_ID 0x3
+#define MKHI_FWCAPS_SET_OS_VER_APP_RULE_CMD 6
+#define MKHI_GEN_GROUP_ID 0xFF
+#define MKHI_GEN_GET_FW_VERSION_CMD 0x2
+
+#define MCHI_GROUP_ID 0xA
+
+struct mkhi_rule_id {
+ __le16 rule_type;
+ u8 feature_id;
+ u8 reserved;
+} __packed;
+
+struct mkhi_fwcaps {
+ struct mkhi_rule_id id;
+ u8 len;
+ u8 data[];
+} __packed;
+
+struct mkhi_msg_hdr {
+ u8 group_id;
+ u8 command;
+ u8 reserved;
+ u8 result;
+} __packed;
+
+struct mkhi_msg {
+ struct mkhi_msg_hdr hdr;
+ u8 data[];
+} __packed;
+
+#endif /* _MEI_MKHI_H_ */
--
2.32.0
From: Tomas Winkler <[email protected]>
Add GSC memory ready command.
The command indicates to the firmware that
extend operation memory was setup and
the firmware may enter PXP mode.
CC: Daniele Ceraolo Spurio <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
---
drivers/misc/mei/mkhi.h | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/mei/mkhi.h b/drivers/misc/mei/mkhi.h
index 27a9b476904e..ea9fe487cb0f 100644
--- a/drivers/misc/mei/mkhi.h
+++ b/drivers/misc/mei/mkhi.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Copyright (c) 2003-2020, Intel Corporation. All rights reserved.
+ * Copyright (c) 2003-2021, Intel Corporation. All rights reserved.
* Intel Management Engine Interface (Intel MEI) Linux driver
*/
@@ -18,6 +18,13 @@
#define MCHI_GROUP_ID 0xA
+#define MKHI_GROUP_ID_GFX 0x30
+#define MKHI_GFX_RESET_WARN_CMD_REQ 0x0
+#define MKHI_GFX_MEMORY_READY_CMD_REQ 0x1
+
+/* Allow transition to PXP mode without approval */
+#define MKHI_GFX_MEM_READY_PXP_ALLOWED 0x1
+
struct mkhi_rule_id {
__le16 rule_type;
u8 feature_id;
@@ -42,4 +49,9 @@ struct mkhi_msg {
u8 data[];
} __packed;
+struct mkhi_gfx_mem_ready {
+ struct mkhi_msg_hdr hdr;
+ uint32_t flags;
+} __packed;
+
#endif /* _MEI_MKHI_H_ */
--
2.32.0
> Subject: [PATCH v2 00/14] GSC support for XeHP SDV and DG2 platforms
>
> Add GSC support for XeHP SDV and DG2 platforms.
>
> The series includes changes for the mei driver:
> - add ability to use polling instead of interrupts
> - add ability to use extended timeouts
> - setup extended operational memory for GSC
>
> The series includes changes for the i915 driver:
> - allocate extended operational memory for GSC
> - GSC on XeHP SDV offsets and definitions
>
> Greg KH, please review and ACK the MEI patches.
> We are pushing these patches through gfx tree as
> the auxiliary device belongs there.
Hi Greg,
Are there any problems with these patches?
Or I did something wrong with this series publishing?
--
Thanks,
Sasha
>
> V2: rebase over merged DG1 series and DG2 enablement patch,
> fix commit messages
>
> Alexander Usyskin (5):
> drm/i915/gsc: add slow_fw flag to the mei auxiliary device
> drm/i915/gsc: add slow_fw flag to the gsc device definition
> drm/i915/gsc: add GSC XeHP SDV platform definition
> mei: gsc: wait for reset thread on stop
> mei: extend timeouts on slow devices.
>
> Daniele Ceraolo Spurio (1):
> HAX: drm/i915: force INTEL_MEI_GSC on for CI
>
> Tomas Winkler (5):
> mei: gsc: use polling instead of interrupts
> mei: mkhi: add memory ready command
> mei: gsc: setup gsc extended operational memory
> mei: debugfs: add pxp mode to devstate in debugfs
> drm/i915/gsc: allocate extended operational memory in LMEM
>
> Vitaly Lubart (3):
> drm/i915/gsc: skip irq initialization if using polling
> mei: bus: export common mkhi definitions into a separate header
> mei: gsc: add transition to PXP mode in resume flow
>
> drivers/gpu/drm/i915/Kconfig.debug | 1 +
> drivers/gpu/drm/i915/gt/intel_gsc.c | 119 +++++++++++++++++++++++++--
> -
> drivers/gpu/drm/i915/gt/intel_gsc.h | 3 +
> drivers/misc/mei/bus-fixup.c | 105 ++++++++++++++++--------
> drivers/misc/mei/client.c | 14 ++--
> drivers/misc/mei/debugfs.c | 17 ++++
> drivers/misc/mei/gsc-me.c | 77 +++++++++++++++---
> drivers/misc/mei/hbm.c | 12 +--
> drivers/misc/mei/hw-me-regs.h | 7 ++
> drivers/misc/mei/hw-me.c | 116 ++++++++++++++++++++++-----
> drivers/misc/mei/hw-me.h | 14 +++-
> drivers/misc/mei/hw-txe.c | 2 +-
> drivers/misc/mei/hw.h | 5 ++
> drivers/misc/mei/init.c | 21 ++++-
> drivers/misc/mei/main.c | 2 +-
> drivers/misc/mei/mei_dev.h | 26 ++++++
> drivers/misc/mei/mkhi.h | 57 +++++++++++++
> drivers/misc/mei/pci-me.c | 2 +-
> include/linux/mei_aux.h | 2 +
> 19 files changed, 511 insertions(+), 91 deletions(-)
> create mode 100644 drivers/misc/mei/mkhi.h
>
> --
> 2.32.0