From: Frank Wunderlich <[email protected]>
Change DTS-Property from bifurcation to the new lane-map.
The lane-map is more generic but PCIe controller driver
converts it back to the bifurcation-bool.
Signed-off-by: Frank Wunderlich <[email protected]>
---
changes in v2:
- new patch
---
arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 86506d7896c6..9acd85db3a3a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -477,14 +477,14 @@ &pcie30phy {
};
&pcie3x1 {
- bifurcation;
+ lane-map = <0 1>;
reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_ngff>;
status = "okay";
};
&pcie3x2 {
- bifurcation;
+ lane-map = <1 0>;
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_minipcie>;
status = "okay";
--
2.25.1