Add reset assertion/deassertion for Aspeed MDIO. There are 4 MDIO
controllers embedded in Aspeed AST2600 SOC and share one reset control
register SCU50[3]. To work with old DT blobs which don't have the reset
property, devm_reset_control_get_optional_shared is used in this change.
Signed-off-by: Dylan Hung <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Andrew Jeffery <[email protected]>
---
drivers/net/mdio/mdio-aspeed.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/net/mdio/mdio-aspeed.c b/drivers/net/mdio/mdio-aspeed.c
index 7aa49827196f..944d005d2bd1 100644
--- a/drivers/net/mdio/mdio-aspeed.c
+++ b/drivers/net/mdio/mdio-aspeed.c
@@ -3,6 +3,7 @@
#include <linux/bitfield.h>
#include <linux/delay.h>
+#include <linux/reset.h>
#include <linux/iopoll.h>
#include <linux/mdio.h>
#include <linux/module.h>
@@ -41,6 +42,7 @@
struct aspeed_mdio {
void __iomem *base;
+ struct reset_control *reset;
};
static int aspeed_mdio_op(struct mii_bus *bus, u8 st, u8 op, u8 phyad, u8 regad,
@@ -174,6 +176,12 @@ static int aspeed_mdio_probe(struct platform_device *pdev)
if (IS_ERR(ctx->base))
return PTR_ERR(ctx->base);
+ ctx->reset = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
+ if (IS_ERR(ctx->reset))
+ return PTR_ERR(ctx->reset);
+
+ reset_control_deassert(ctx->reset);
+
bus->name = DRV_NAME;
snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id);
bus->parent = &pdev->dev;
@@ -184,6 +192,7 @@ static int aspeed_mdio_probe(struct platform_device *pdev)
rc = of_mdiobus_register(bus, pdev->dev.of_node);
if (rc) {
dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
+ reset_control_assert(ctx->reset);
return rc;
}
@@ -194,7 +203,11 @@ static int aspeed_mdio_probe(struct platform_device *pdev)
static int aspeed_mdio_remove(struct platform_device *pdev)
{
- mdiobus_unregister(platform_get_drvdata(pdev));
+ struct mii_bus *bus = (struct mii_bus *)platform_get_drvdata(pdev);
+ struct aspeed_mdio *ctx = bus->priv;
+
+ reset_control_assert(ctx->reset);
+ mdiobus_unregister(bus);
return 0;
}
--
2.25.1