Add syscon compatible required for tsens driver to correctly probe driver
and access the reg. Also add cxo and pxo tag and declare them as gcc clock
now requires them for the ipq8064 gcc driver that has now been modernized.
Signed-off-by: Ansuel Smith <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 996f4458d9fc..9817448cfa95 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -298,13 +298,13 @@ smem: smem@41000000 {
};
clocks {
- cxo_board {
+ cxo_board: cxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
- pxo_board {
+ pxo_board: pxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
@@ -736,7 +736,9 @@ tsens_calib_backup: calib_backup@410 {
};
gcc: clock-controller@900000 {
- compatible = "qcom,gcc-ipq8064";
+ compatible = "qcom,gcc-ipq8064", "syscon";
+ clocks = <&pxo_board>, <&cxo_board>;
+ clock-names = "pxo", "cxo";
reg = <0x00900000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
--
2.34.1