2022-05-02 23:21:09

by Stephen Kitt

Subject: [PATCH v3] ASoC: tpa6130: use i2c_match_id and simple i2c probe

As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.

The i2c id table is moved up before the probe function, as suggested
by Wolfram Sang.

Signed-off-by: Stephen Kitt <[email protected]>
---
Changes since v2: added missing probe_new change.

Changes since v1: two missing files were added (in the overall patch
series).
---
sound/soc/codecs/tpa6130a2.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c
index e2d7ae615c52..8c00db32996b 100644
--- a/sound/soc/codecs/tpa6130a2.c
+++ b/sound/soc/codecs/tpa6130a2.c
@@ -209,13 +209,20 @@ static const struct regmap_config tpa6130a2_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};

-static int tpa6130a2_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static const struct i2c_device_id tpa6130a2_id[] = {
+ { "tpa6130a2", TPA6130A2 },
+ { "tpa6140a2", TPA6140A2 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tpa6130a2_id);
+
+static int tpa6130a2_probe(struct i2c_client *client)
{
struct device *dev;
struct tpa6130a2_data *data;
struct tpa6130a2_platform_data *pdata = client->dev.platform_data;
struct device_node *np = client->dev.of_node;
+ const struct i2c_device_id *id;
const char *regulator;
unsigned int version;
int ret;
@@ -244,6 +251,7 @@ static int tpa6130a2_probe(struct i2c_client *client,

i2c_set_clientdata(client, data);

+ id = i2c_match_id(tpa6130a2_id, client);
data->id = id->driver_data;

if (data->power_gpio >= 0) {
@@ -297,13 +305,6 @@ static int tpa6130a2_probe(struct i2c_client *client,
&tpa6130a2_component_driver, NULL, 0);
}

-static const struct i2c_device_id tpa6130a2_id[] = {
- { "tpa6130a2", TPA6130A2 },
- { "tpa6140a2", TPA6140A2 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, tpa6130a2_id);
-
#if IS_ENABLED(CONFIG_OF)
static const struct of_device_id tpa6130a2_of_match[] = {
{ .compatible = "ti,tpa6130a2", },
@@ -318,7 +319,7 @@ static struct i2c_driver tpa6130a2_i2c_driver = {
.name = "tpa6130a2",
.of_match_table = of_match_ptr(tpa6130a2_of_match),
},
- .probe = tpa6130a2_probe,
+ .probe_new = tpa6130a2_probe,
.id_table = tpa6130a2_id,
};


base-commit: 180e66c028cbce98f297962db188965efc7546d7
--
2.30.2

2022-05-06 16:10:26

by Mark Brown

Subject: Re: [PATCH v3] ASoC: tpa6130: use i2c_match_id and simple i2c probe

On Sun, 1 May 2022 19:10:09 +0200, Stephen Kitt wrote:
> As part of the ongoing i2c transition to the simple probe
> ("probe_new"), this patch uses i2c_match_id to retrieve the
> driver_data for the probed device. The id parameter is thus no longer
> necessary and the simple probe can be used instead.
>
> The i2c id table is moved up before the probe function, as suggested
> by Wolfram Sang.
>
> [...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: tpa6130: use i2c_match_id and simple i2c probe
commit: 55d2a66cfec6a4196243940f754f5b34dd2106bf

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark