The SCP has three memory regions: sram, cfg and l1tcm. While the first
two are required, l1tcm is optional. Fix the dt-binding so that it can
be omitted and update the description. This gets rid of dtbs_check
warnings for devicetrees where the l1tcm reg is missing like mt8183.
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
---
Changes in v3:
- Made the cfg reg required again. After looking again into the mtk-scp
driver, only l1tcm is optional.
- Added mention that a dtbs_check warning gets fixed by patch in commit
message.
Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
index 823a236242de..eeea84379a1e 100644
--- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
@@ -23,11 +23,13 @@ properties:
reg:
description:
- Should contain the address ranges for memory regions SRAM, CFG, and
- L1TCM.
+ Should contain the address ranges for memory regions SRAM, CFG, and,
+ optionally, L1TCM.
+ minItems: 2
maxItems: 3
reg-names:
+ minItems: 2
items:
- const: sram
- const: cfg
--
2.36.0
On 03/05/2022 23:11, Nícolas F. R. A. Prado wrote:
> The SCP has three memory regions: sram, cfg and l1tcm. While the first
> two are required, l1tcm is optional. Fix the dt-binding so that it can
> be omitted and update the description. This gets rid of dtbs_check
> warnings for devicetrees where the l1tcm reg is missing like mt8183.
Please add "if:then:" for this case (need to put all ifs in allOf). I
understand that l1tcm is optional *only* on mt8183.
Best regards,
Krzysztof