2022-05-04 22:42:10

by Markuss Broks

[permalink] [raw]
Subject: [PATCH RESEND v6 1/2] dt-bindings: leds: convert ktd2692 bindings to yaml

This patch converts the leds-ktd2692.txt bindings to modern yaml
style device-tree bindings.

Reviewed-by: Andy Shevchenko <[email protected]>

Signed-off-by: Markuss Broks <[email protected]>
---
.../bindings/leds/kinetic,ktd2692.yaml | 87 +++++++++++++++++++
.../devicetree/bindings/leds/leds-ktd2692.txt | 50 -----------
2 files changed, 87 insertions(+), 50 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
delete mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt

diff --git a/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
new file mode 100644
index 000000000000..bac95a51afa1
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/kinetic,ktd2692.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: KTD2692 Flash LED Driver from Kinetic Technologies
+
+maintainers:
+ - Markuss Broks <[email protected]>
+
+description: |
+ KTD2692 is the ideal power solution for high-power flash LEDs.
+ It uses ExpressWire single-wire programming for maximum flexibility.
+
+ The ExpressWire interface through CTRL pin can control LED on/off and
+ enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
+ Flash timeout, LVP(low voltage protection).
+
+ Also, When the AUX pin is pulled high while CTRL pin is high,
+ LED current will be ramped up to the flash-mode current level.
+
+properties:
+ compatible:
+ const: kinetic,ktd2692
+
+ ctrl-gpios:
+ maxItems: 1
+ description: Specifier of the GPIO connected to CTRL pin.
+
+ aux-gpios:
+ maxItems: 1
+ description: Specifier of the GPIO connected to CTRL pin.
+
+ vin-supply:
+ description: LED supply (2.7V to 5.5V).
+
+ led:
+ type: object
+ $ref: common.yaml#
+ description: Properties for the LED.
+ properties:
+ function: true
+ color: true
+ flash-max-timeout-us:
+ description: Flash LED maximum timeout.
+
+ led-max-microamp:
+ maximum: 300000
+ description: Minimum Threshold for Timer protection
+ is defined internally (Maximum 300mA).
+
+ flash-max-microamp:
+ maximum: 300000
+ description: Flash LED maximum current
+ Formula - I(uA) = 15000000 / Rset.
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - ctrl-gpios
+ - led
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+
+ ktd2692 {
+ compatible = "kinetic,ktd2692";
+ ctrl-gpios = <&gpc0 1 0>;
+ aux-gpios = <&gpc0 2 0>;
+ vin-supply = <&vbat>;
+
+ led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ flash-max-timeout-us = <250000>;
+ flash-max-microamp = <150000>;
+ led-max-microamp = <25000>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
deleted file mode 100644
index 853737452580..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Kinetic Technologies - KTD2692 Flash LED Driver
-
-KTD2692 is the ideal power solution for high-power flash LEDs.
-It uses ExpressWire single-wire programming for maximum flexibility.
-
-The ExpressWire interface through CTRL pin can control LED on/off and
-enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
-Flash timeout, LVP(low voltage protection).
-
-Also, When the AUX pin is pulled high while CTRL pin is high,
-LED current will be ramped up to the flash-mode current level.
-
-Required properties:
-- compatible : Should be "kinetic,ktd2692".
-- ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
-- aux-gpios : Specifier of the GPIO connected to AUX pin.
-
-Optional properties:
-- vin-supply : "vin" LED supply (2.7V to 5.5V).
- See Documentation/devicetree/bindings/regulator/regulator.txt
-
-A discrete LED element connected to the device must be represented by a child
-node - See Documentation/devicetree/bindings/leds/common.txt
-
-Required properties for flash LED child nodes:
- See Documentation/devicetree/bindings/leds/common.txt
-- led-max-microamp : Minimum Threshold for Timer protection
- is defined internally (Maximum 300mA).
-- flash-max-microamp : Flash LED maximum current
- Formula : I(mA) = 15000 / Rset.
-- flash-max-timeout-us : Flash LED maximum timeout.
-
-Optional properties for flash LED child nodes:
-- label : See Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-ktd2692 {
- compatible = "kinetic,ktd2692";
- ctrl-gpios = <&gpc0 1 0>;
- aux-gpios = <&gpc0 2 0>;
- vin-supply = <&vbat>;
-
- flash-led {
- label = "ktd2692-flash";
- led-max-microamp = <300000>;
- flash-max-microamp = <1500000>;
- flash-max-timeout-us = <1835000>;
- };
-};
--
2.35.1