Eliminate the follow smatch warning:
drivers/block/paride/on26.c:158 on26_test_port() warn: inconsistent
indenting.
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Jiapeng Chong <[email protected]>
---
drivers/block/paride/on26.c | 85 +++++++++++++++++++------------------
1 file changed, 44 insertions(+), 41 deletions(-)
diff --git a/drivers/block/paride/on26.c b/drivers/block/paride/on26.c
index 95ba256921f2..d2ee74dbee29 100644
--- a/drivers/block/paride/on26.c
+++ b/drivers/block/paride/on26.c
@@ -125,61 +125,64 @@ static void on26_disconnect ( PIA *pi )
#define RESET_WAIT 200
static int on26_test_port( PIA *pi) /* hard reset */
+{
+ int i, m, d, x = 0, y = 0;
-{ int i, m, d, x=0, y=0;
-
- pi->saved_r0 = r0();
- pi->saved_r2 = r2();
+ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
- d = pi->delay;
- m = pi->mode;
- pi->delay = 5;
- pi->mode = 0;
+ d = pi->delay;
+ m = pi->mode;
+ pi->delay = 5;
+ pi->mode = 0;
- w2(0xc);
+ w2(0xc);
- CCP(0x30); CCP(0);
+ CCP(0x30); CCP(0);
- w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);
- i = ((r1() & 0xf0) << 4); w0(0x87);
- i |= (r1() & 0xf0); w0(0x78);
- w0(0x20);w2(4);w2(5);
- i |= ((r1() & 0xf0) >> 4);
- w2(4);w0(0xff);
+ w0(0xfe); w0(0xaa); w0(0x55); w0(0); w0(0xff);
+ i = ((r1() & 0xf0) << 4); w0(0x87);
+ i |= (r1() & 0xf0); w0(0x78);
+ w0(0x20); w2(4); w2(5);
+ i |= ((r1() & 0xf0) >> 4);
+ w2(4); w0(0xff);
- if (i == 0xb5f) {
+ if (i == 0xb5f) {
- w0(2); P1; w0(0); P2;
- w0(3); P1; w0(0); P2;
- w0(2); P1; w0(8); P2; udelay(100);
- w0(2); P1; w0(0xa); P2; udelay(100);
- w0(2); P1; w0(8); P2; udelay(1000);
+ w0(2); P1; w0(0); P2;
+ w0(3); P1; w0(0); P2;
+ w0(2); P1; w0(8); P2; udelay(100);
+ w0(2); P1; w0(0xa); P2; udelay(100);
+ w0(2); P1; w0(8); P2; udelay(1000);
- on26_write_regr(pi,0,6,0xa0);
+ on26_write_regr(pi, 0, 6, 0xa0);
- for (i=0;i<RESET_WAIT;i++) {
- on26_write_regr(pi,0,6,0xa0);
- x = on26_read_regr(pi,0,7);
- on26_write_regr(pi,0,6,0xb0);
- y = on26_read_regr(pi,0,7);
- if (!((x&0x80)||(y&0x80))) break;
- mdelay(100);
- }
+ for (i = 0; i < RESET_WAIT; i++) {
+ on26_write_regr(pi, 0, 6, 0xa0);
+ x = on26_read_regr(pi, 0, 7);
- if (i == RESET_WAIT)
- printk("on26: Device reset failed (%x,%x)\n",x,y);
+ on26_write_regr(pi, 0, 6, 0xb0);
+ y = on26_read_regr(pi, 0, 7);
- w0(4); P1; w0(4); P1;
- }
+ if (!((x & 0x80) || (y & 0x80)))
+ break;
+ mdelay(100);
+ }
- CCP(0x30);
+ if (i == RESET_WAIT)
+ printk("on26: Device reset failed (%x,%x)\n", x, y);
- pi->delay = d;
- pi->mode = m;
- w0(pi->saved_r0);
- w2(pi->saved_r2);
+ w0(4); P1; w0(4); P1;
+ }
+
+ CCP(0x30);
+
+ pi->delay = d;
+ pi->mode = m;
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
- return 5;
+ return 5;
}
--
2.20.1.7.g153144c