This adds the efuse node. This will be required by the thermal driver
to get the calibration data.
Signed-off-by: Alexandre Bailon <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 416d37e07324..12887fb4d0d1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
#include <dt-bindings/power/mt8195-power.h>
#include <dt-bindings/reset/ti-syscon.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "mediatek,mt8195";
@@ -1248,6 +1249,23 @@ nor_flash: spi@1132c000 {
status = "disabled";
};
+ efuse: efuse@11c10000 {
+ compatible = "mediatek,efuse";
+ reg = <0 0x11c10000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ lvts_e_data1: data1 {
+ reg = <0x1bc 0x14>;
+ };
+ lvts_e_data2: data1-1 {
+ reg = <0x1d0 0x38>;
+ };
+ svs_calibration: calib@580 {
+ reg = <0x580 0x64>;
+ };
+ };
+
u3phy2: t-phy@11c40000 {
compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
#address-cells = <1>;
--
2.35.1