Some of the SBI PMU calls does not pass 64bit arguments
correctly and not under RV32 compile time flags. Currently,
this doesn't create any incorrect results as RV64 ignores
any value in the additional register and qemu doesn't support
raw events.
Fix those SBI calls in order to set correct values for RV32.
Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension")
Signed-off-by: Atish Patra <[email protected]>
---
drivers/perf/riscv_pmu_sbi.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index 7ad92039a718..fab0dd497393 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -274,8 +274,13 @@ static int pmu_sbi_ctr_get_idx(struct perf_event *event)
cflags |= SBI_PMU_CFG_FLAG_SET_UINH;
/* retrieve the available counter index */
+#if defined(CONFIG_32BIT)
+ ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase, cmask,
+ cflags, hwc->event_base, hwc->config, hwc->config >> 32);
+#else
ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase, cmask,
cflags, hwc->event_base, hwc->config, 0);
+#endif
if (ret.error) {
pr_debug("Not able to find a counter for event %lx config %llx\n",
hwc->event_base, hwc->config);
@@ -417,8 +422,13 @@ static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival)
struct hw_perf_event *hwc = &event->hw;
unsigned long flag = SBI_PMU_START_FLAG_SET_INIT_VALUE;
+#if defined(CONFIG_32BIT)
ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx,
1, flag, ival, ival >> 32, 0);
+#else
+ ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx,
+ 1, flag, ival, 0, 0);
+#endif
if (ret.error && (ret.error != SBI_ERR_ALREADY_STARTED))
pr_err("Starting counter idx %d failed with error %d\n",
hwc->idx, sbi_err_map_linux_errno(ret.error));
--
2.25.1
On Fri, May 13, 2022 at 7:25 AM Atish Patra <[email protected]> wrote:
>
> Some of the SBI PMU calls does not pass 64bit arguments
> correctly and not under RV32 compile time flags. Currently,
> this doesn't create any incorrect results as RV64 ignores
> any value in the additional register and qemu doesn't support
> raw events.
>
> Fix those SBI calls in order to set correct values for RV32.
>
> Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension")
>
> Signed-off-by: Atish Patra <[email protected]>
Looks good to me.
Reviewed-by: Anup Patel <[email protected]>
Regards,
Anup
> ---
> drivers/perf/riscv_pmu_sbi.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> index 7ad92039a718..fab0dd497393 100644
> --- a/drivers/perf/riscv_pmu_sbi.c
> +++ b/drivers/perf/riscv_pmu_sbi.c
> @@ -274,8 +274,13 @@ static int pmu_sbi_ctr_get_idx(struct perf_event *event)
> cflags |= SBI_PMU_CFG_FLAG_SET_UINH;
>
> /* retrieve the available counter index */
> +#if defined(CONFIG_32BIT)
> + ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase, cmask,
> + cflags, hwc->event_base, hwc->config, hwc->config >> 32);
> +#else
> ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase, cmask,
> cflags, hwc->event_base, hwc->config, 0);
> +#endif
> if (ret.error) {
> pr_debug("Not able to find a counter for event %lx config %llx\n",
> hwc->event_base, hwc->config);
> @@ -417,8 +422,13 @@ static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival)
> struct hw_perf_event *hwc = &event->hw;
> unsigned long flag = SBI_PMU_START_FLAG_SET_INIT_VALUE;
>
> +#if defined(CONFIG_32BIT)
> ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx,
> 1, flag, ival, ival >> 32, 0);
> +#else
> + ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx,
> + 1, flag, ival, 0, 0);
> +#endif
> if (ret.error && (ret.error != SBI_ERR_ALREADY_STARTED))
> pr_err("Starting counter idx %d failed with error %d\n",
> hwc->idx, sbi_err_map_linux_errno(ret.error));
> --
> 2.25.1
>