Add USB2.0 device controller(udc) node to device tree
for AST2600.
Signed-off-by: Neal Liu <[email protected]>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 3d5ce9da42c3..5517313eb2b5 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -298,6 +298,16 @@ vhub: usb-vhub@1e6a0000 {
status = "disabled";
};
+ udc: udc@1e6a2000 {
+ compatible = "aspeed,ast2600-udc";
+ reg = <0x1e6a2000 0x300>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2bd_default>;
+ status = "disabled";
+ };
+
apb {
compatible = "simple-bus";
#address-cells = <1>;
--
2.25.1