2022-05-14 00:32:45

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.9 0/7] 4.9.314-rc1 review

This is the start of the stable review cycle for the 4.9.314 release.
There are 7 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun, 15 May 2022 14:22:19 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.314-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>
Linux 4.9.314-rc1

Muchun Song <[email protected]>
mm: userfaultfd: fix missing cache flush in mcopy_atomic_pte() and __mcopy_atomic()

Ricky WU <[email protected]>
mmc: rtsx: add 74 Clocks in power on flow

Itay Iellin <[email protected]>
Bluetooth: Fix the creation of hdev->name

Andreas Larsson <[email protected]>
can: grcan: only use the NAPI poll budget for RX

Andreas Larsson <[email protected]>
can: grcan: grcan_probe(): fix broken system id check for errata workaround needs

Lee Jones <[email protected]>
block: drbd: drbd_nl: Make conversion to 'enum drbd_ret_code' explicit

Nathan Chancellor <[email protected]>
MIPS: Use address-of operator on section symbols


-------------

Diffstat:

Makefile | 4 ++--
arch/mips/bmips/setup.c | 2 +-
arch/mips/lantiq/prom.c | 2 +-
arch/mips/pic32/pic32mzda/init.c | 2 +-
drivers/block/drbd/drbd_nl.c | 13 ++++++++-----
drivers/mmc/host/rtsx_pci_sdmmc.c | 30 ++++++++++++++++++++----------
drivers/net/can/grcan.c | 38 ++++++++++++++++++--------------------
include/net/bluetooth/hci_core.h | 3 +++
mm/userfaultfd.c | 3 +++
net/bluetooth/hci_core.c | 6 +++---
10 files changed, 60 insertions(+), 43 deletions(-)




2022-05-14 00:51:55

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.9 2/7] block: drbd: drbd_nl: Make conversion to enum drbd_ret_code explicit

From: Lee Jones <[email protected]>

commit 1f1e87b4dc4598eac57a69868534b92d65e47e82 upstream.

Fixes the following W=1 kernel build warning(s):

from drivers/block/drbd/drbd_nl.c:24:
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_set_role’:
drivers/block/drbd/drbd_nl.c:793:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
drivers/block/drbd/drbd_nl.c:795:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’:
drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_connect’:
drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_disconnect’:
drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]

Cc: Philipp Reisner <[email protected]>
Cc: Lars Ellenberg <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/drbd/drbd_nl.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)

--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -774,9 +774,11 @@ int drbd_adm_set_role(struct sk_buff *sk
mutex_lock(&adm_ctx.resource->adm_mutex);

if (info->genlhdr->cmd == DRBD_ADM_PRIMARY)
- retcode = drbd_set_role(adm_ctx.device, R_PRIMARY, parms.assume_uptodate);
+ retcode = (enum drbd_ret_code)drbd_set_role(adm_ctx.device,
+ R_PRIMARY, parms.assume_uptodate);
else
- retcode = drbd_set_role(adm_ctx.device, R_SECONDARY, 0);
+ retcode = (enum drbd_ret_code)drbd_set_role(adm_ctx.device,
+ R_SECONDARY, 0);

mutex_unlock(&adm_ctx.resource->adm_mutex);
genl_lock();
@@ -1933,7 +1935,7 @@ int drbd_adm_attach(struct sk_buff *skb,
drbd_flush_workqueue(&connection->sender_work);

rv = _drbd_request_state(device, NS(disk, D_ATTACHING), CS_VERBOSE);
- retcode = rv; /* FIXME: Type mismatch. */
+ retcode = (enum drbd_ret_code)rv;
drbd_resume_io(device);
if (rv < SS_SUCCESS)
goto fail;
@@ -2684,7 +2686,8 @@ int drbd_adm_connect(struct sk_buff *skb
}
rcu_read_unlock();

- retcode = conn_request_state(connection, NS(conn, C_UNCONNECTED), CS_VERBOSE);
+ retcode = (enum drbd_ret_code)conn_request_state(connection,
+ NS(conn, C_UNCONNECTED), CS_VERBOSE);

conn_reconfig_done(connection);
mutex_unlock(&adm_ctx.resource->adm_mutex);
@@ -2790,7 +2793,7 @@ int drbd_adm_disconnect(struct sk_buff *
mutex_lock(&adm_ctx.resource->adm_mutex);
rv = conn_try_disconnect(connection, parms.force_disconnect);
if (rv < SS_SUCCESS)
- retcode = rv; /* FIXME: Type mismatch. */
+ retcode = (enum drbd_ret_code)rv;
else
retcode = NO_ERROR;
mutex_unlock(&adm_ctx.resource->adm_mutex);



2022-05-14 01:21:56

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.9 6/7] mmc: rtsx: add 74 Clocks in power on flow

From: Ricky WU <[email protected]>

commit 1f311c94aabdb419c28e3147bcc8ab89269f1a7e upstream.

SD spec definition:
"Host provides at least 74 Clocks before issuing first command"
After 1ms for the voltage stable then start issuing the Clock signals

if POWER STATE is
MMC_POWER_OFF to MMC_POWER_UP to issue Clock signal to card
MMC_POWER_UP to MMC_POWER_ON to stop issuing signal to card

Signed-off-by: Ricky Wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Ricky Wu <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Christian Loehle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/rtsx_pci_sdmmc.c | 30 ++++++++++++++++++++----------
1 file changed, 20 insertions(+), 10 deletions(-)

--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -49,10 +49,7 @@ struct realtek_pci_sdmmc {
bool double_clk;
bool eject;
bool initial_mode;
- int power_state;
-#define SDMMC_POWER_ON 1
-#define SDMMC_POWER_OFF 0
-
+ int prev_power_state;
int sg_count;
s32 cookie;
int cookie_sg_count;
@@ -914,14 +911,21 @@ static int sd_set_bus_width(struct realt
return err;
}

-static int sd_power_on(struct realtek_pci_sdmmc *host)
+static int sd_power_on(struct realtek_pci_sdmmc *host, unsigned char power_mode)
{
struct rtsx_pcr *pcr = host->pcr;
int err;

- if (host->power_state == SDMMC_POWER_ON)
+ if (host->prev_power_state == MMC_POWER_ON)
return 0;

+ if (host->prev_power_state == MMC_POWER_UP) {
+ rtsx_pci_write_register(pcr, SD_BUS_STAT, SD_CLK_TOGGLE_EN, 0);
+ goto finish;
+ }
+
+ msleep(100);
+
rtsx_pci_init_cmd(pcr);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SELECT, 0x07, SD_MOD_SEL);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SHARE_MODE,
@@ -940,11 +944,17 @@ static int sd_power_on(struct realtek_pc
if (err < 0)
return err;

+ mdelay(1);
+
err = rtsx_pci_write_register(pcr, CARD_OE, SD_OUTPUT_EN, SD_OUTPUT_EN);
if (err < 0)
return err;

- host->power_state = SDMMC_POWER_ON;
+ /* send at least 74 clocks */
+ rtsx_pci_write_register(pcr, SD_BUS_STAT, SD_CLK_TOGGLE_EN, SD_CLK_TOGGLE_EN);
+
+finish:
+ host->prev_power_state = power_mode;
return 0;
}

@@ -953,7 +963,7 @@ static int sd_power_off(struct realtek_p
struct rtsx_pcr *pcr = host->pcr;
int err;

- host->power_state = SDMMC_POWER_OFF;
+ host->prev_power_state = MMC_POWER_OFF;

rtsx_pci_init_cmd(pcr);

@@ -979,7 +989,7 @@ static int sd_set_power_mode(struct real
if (power_mode == MMC_POWER_OFF)
err = sd_power_off(host);
else
- err = sd_power_on(host);
+ err = sd_power_on(host, power_mode);

return err;
}
@@ -1417,7 +1427,7 @@ static int rtsx_pci_sdmmc_drv_probe(stru
host->mmc = mmc;
host->pdev = pdev;
host->cookie = -1;
- host->power_state = SDMMC_POWER_OFF;
+ host->prev_power_state = MMC_POWER_OFF;
INIT_WORK(&host->work, sd_request);
platform_set_drvdata(pdev, host);
pcr->slots[RTSX_SD_CARD].p_dev = pdev;



2022-05-14 01:23:51

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.9 3/7] can: grcan: grcan_probe(): fix broken system id check for errata workaround needs

From: Andreas Larsson <[email protected]>

commit 1e93ed26acf03fe6c97c6d573a10178596aadd43 upstream.

The systemid property was checked for in the wrong place of the device
tree and compared to the wrong value.

Fixes: 6cec9b07fe6a ("can: grcan: Add device driver for GRCAN and GRHCAN cores")
Link: https://lore.kernel.org/all/[email protected]
Cc: [email protected]
Signed-off-by: Andreas Larsson <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/grcan.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)

--- a/drivers/net/can/grcan.c
+++ b/drivers/net/can/grcan.c
@@ -245,7 +245,7 @@ struct grcan_device_config {
.rxsize = GRCAN_DEFAULT_BUFFER_SIZE, \
}

-#define GRCAN_TXBUG_SAFE_GRLIB_VERSION 0x4100
+#define GRCAN_TXBUG_SAFE_GRLIB_VERSION 4100
#define GRLIB_VERSION_MASK 0xffff

/* GRCAN private data structure */
@@ -1665,6 +1665,7 @@ exit_free_candev:
static int grcan_probe(struct platform_device *ofdev)
{
struct device_node *np = ofdev->dev.of_node;
+ struct device_node *sysid_parent;
struct resource *res;
u32 sysid, ambafreq;
int irq, err;
@@ -1674,10 +1675,15 @@ static int grcan_probe(struct platform_d
/* Compare GRLIB version number with the first that does not
* have the tx bug (see start_xmit)
*/
- err = of_property_read_u32(np, "systemid", &sysid);
- if (!err && ((sysid & GRLIB_VERSION_MASK)
- >= GRCAN_TXBUG_SAFE_GRLIB_VERSION))
- txbug = false;
+ sysid_parent = of_find_node_by_path("/ambapp0");
+ if (sysid_parent) {
+ of_node_get(sysid_parent);
+ err = of_property_read_u32(sysid_parent, "systemid", &sysid);
+ if (!err && ((sysid & GRLIB_VERSION_MASK) >=
+ GRCAN_TXBUG_SAFE_GRLIB_VERSION))
+ txbug = false;
+ of_node_put(sysid_parent);
+ }

err = of_property_read_u32(np, "freq", &ambafreq);
if (err) {



2022-05-14 02:19:48

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.9 4/7] can: grcan: only use the NAPI poll budget for RX

From: Andreas Larsson <[email protected]>

commit 2873d4d52f7c52d60b316ba6c47bd7122b5a9861 upstream.

The previous split budget between TX and RX made it return not using
the entire budget but at the same time not having calling called
napi_complete. This sometimes led to the poll to not be called, and at
the same time having TX and RX interrupts disabled resulting in the
driver getting stuck.

Fixes: 6cec9b07fe6a ("can: grcan: Add device driver for GRCAN and GRHCAN cores")
Link: https://lore.kernel.org/all/[email protected]
Cc: [email protected]
Signed-off-by: Andreas Larsson <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/grcan.c | 22 +++++++---------------
1 file changed, 7 insertions(+), 15 deletions(-)

--- a/drivers/net/can/grcan.c
+++ b/drivers/net/can/grcan.c
@@ -1141,7 +1141,7 @@ static int grcan_close(struct net_device
return 0;
}

-static int grcan_transmit_catch_up(struct net_device *dev, int budget)
+static void grcan_transmit_catch_up(struct net_device *dev)
{
struct grcan_priv *priv = netdev_priv(dev);
unsigned long flags;
@@ -1149,7 +1149,7 @@ static int grcan_transmit_catch_up(struc

spin_lock_irqsave(&priv->lock, flags);

- work_done = catch_up_echo_skb(dev, budget, true);
+ work_done = catch_up_echo_skb(dev, -1, true);
if (work_done) {
if (!priv->resetting && !priv->closing &&
!(priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))
@@ -1163,8 +1163,6 @@ static int grcan_transmit_catch_up(struc
}

spin_unlock_irqrestore(&priv->lock, flags);
-
- return work_done;
}

static int grcan_receive(struct net_device *dev, int budget)
@@ -1246,19 +1244,13 @@ static int grcan_poll(struct napi_struct
struct net_device *dev = priv->dev;
struct grcan_registers __iomem *regs = priv->regs;
unsigned long flags;
- int tx_work_done, rx_work_done;
- int rx_budget = budget / 2;
- int tx_budget = budget - rx_budget;
+ int work_done;

- /* Half of the budget for receiveing messages */
- rx_work_done = grcan_receive(dev, rx_budget);
+ work_done = grcan_receive(dev, budget);

- /* Half of the budget for transmitting messages as that can trigger echo
- * frames being received
- */
- tx_work_done = grcan_transmit_catch_up(dev, tx_budget);
+ grcan_transmit_catch_up(dev);

- if (rx_work_done < rx_budget && tx_work_done < tx_budget) {
+ if (work_done < budget) {
napi_complete(napi);

/* Guarantee no interference with a running reset that otherwise
@@ -1275,7 +1267,7 @@ static int grcan_poll(struct napi_struct
spin_unlock_irqrestore(&priv->lock, flags);
}

- return rx_work_done + tx_work_done;
+ return work_done;
}

/* Work tx bug by waiting while for the risky situation to clear. If that fails,



2022-05-14 02:29:24

by Shuah Khan

[permalink] [raw]
Subject: Re: [PATCH 4.9 0/7] 4.9.314-rc1 review

On 5/13/22 8:23 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.314 release.
> There are 7 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 15 May 2022 14:22:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.314-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <[email protected]>

thanks,
-- Shuah


2022-05-14 03:42:29

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.9 1/7] MIPS: Use address-of operator on section symbols

From: Nathan Chancellor <[email protected]>

commit d422c6c0644bccbb1ebeefffa51f35cec3019517 upstream.

When building xway_defconfig with clang:

arch/mips/lantiq/prom.c:82:23: error: array comparison always evaluates
to true [-Werror,-Wtautological-compare]
else if (__dtb_start != __dtb_end)
^
1 error generated.

These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning
and does not change the resulting assembly with either clang/ld.lld
or gcc/ld (tested with diff + objdump -Dr). Do the same thing across
the entire MIPS subsystem to ensure there are no more warnings around
this type of comparison.

Link: https://github.com/ClangBuiltLinux/linux/issues/1232
Signed-off-by: Nathan Chancellor <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Cc: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/bmips/setup.c | 2 +-
arch/mips/lantiq/prom.c | 2 +-
arch/mips/pic32/pic32mzda/init.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)

--- a/arch/mips/bmips/setup.c
+++ b/arch/mips/bmips/setup.c
@@ -174,7 +174,7 @@ void __init plat_mem_setup(void)
dtb = phys_to_virt(fw_arg2);
else if (fw_passed_dtb) /* UHI interface */
dtb = (void *)fw_passed_dtb;
- else if (__dtb_start != __dtb_end)
+ else if (&__dtb_start != &__dtb_end)
dtb = (void *)__dtb_start;
else
panic("no dtb found");
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -76,7 +76,7 @@ void __init plat_mem_setup(void)

if (fw_passed_dtb) /* UHI interface */
dtb = (void *)fw_passed_dtb;
- else if (__dtb_start != __dtb_end)
+ else if (&__dtb_start != &__dtb_end)
dtb = (void *)__dtb_start;
else
panic("no dtb found");
--- a/arch/mips/pic32/pic32mzda/init.c
+++ b/arch/mips/pic32/pic32mzda/init.c
@@ -36,7 +36,7 @@ static ulong get_fdtaddr(void)
if (fw_passed_dtb && !fw_arg2 && !fw_arg3)
return (ulong)fw_passed_dtb;

- if (__dtb_start < __dtb_end)
+ if (&__dtb_start < &__dtb_end)
ftaddr = (ulong)__dtb_start;

return ftaddr;



2022-05-14 03:43:56

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.9 5/7] Bluetooth: Fix the creation of hdev->name

From: Itay Iellin <[email protected]>

commit 103a2f3255a95991252f8f13375c3a96a75011cd upstream.

Set a size limit of 8 bytes of the written buffer to "hdev->name"
including the terminating null byte, as the size of "hdev->name" is 8
bytes. If an id value which is greater than 9999 is allocated,
then the "snprintf(hdev->name, sizeof(hdev->name), "hci%d", id)"
function call would lead to a truncation of the id value in decimal
notation.

Set an explicit maximum id parameter in the id allocation function call.
The id allocation function defines the maximum allocated id value as the
maximum id parameter value minus one. Therefore, HCI_MAX_ID is defined
as 10000.

Signed-off-by: Itay Iellin <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/bluetooth/hci_core.h | 3 +++
net/bluetooth/hci_core.c | 6 +++---
2 files changed, 6 insertions(+), 3 deletions(-)

--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -32,6 +32,9 @@
/* HCI priority */
#define HCI_PRIO_MAX 7

+/* HCI maximum id value */
+#define HCI_MAX_ID 10000
+
/* HCI Core structures */
struct inquiry_data {
bdaddr_t bdaddr;
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3064,10 +3064,10 @@ int hci_register_dev(struct hci_dev *hde
*/
switch (hdev->dev_type) {
case HCI_PRIMARY:
- id = ida_simple_get(&hci_index_ida, 0, 0, GFP_KERNEL);
+ id = ida_simple_get(&hci_index_ida, 0, HCI_MAX_ID, GFP_KERNEL);
break;
case HCI_AMP:
- id = ida_simple_get(&hci_index_ida, 1, 0, GFP_KERNEL);
+ id = ida_simple_get(&hci_index_ida, 1, HCI_MAX_ID, GFP_KERNEL);
break;
default:
return -EINVAL;
@@ -3076,7 +3076,7 @@ int hci_register_dev(struct hci_dev *hde
if (id < 0)
return id;

- sprintf(hdev->name, "hci%d", id);
+ snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
hdev->id = id;

BT_DBG("%p name %s bus %d", hdev, hdev->name, hdev->bus);



2022-05-14 03:53:06

by Pavel Machek

[permalink] [raw]
Subject: Re: [PATCH 4.9 0/7] 4.9.314-rc1 review

Hi!

> This is the start of the stable review cycle for the 4.9.314 release.
> There are 7 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.9.y

Tested-by: Pavel Machek (CIP) <[email protected]>

Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


Attachments:
(No filename) (658.00 B)
signature.asc (201.00 B)
Download all attachments

2022-05-14 04:33:54

by Florian Fainelli

[permalink] [raw]
Subject: Re: [PATCH 4.9 0/7] 4.9.314-rc1 review

On 5/13/22 07:23, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.314 release.
> There are 7 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 15 May 2022 14:22:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.314-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <[email protected]>
--
Florian

2022-05-14 16:25:49

by Guenter Roeck

[permalink] [raw]
Subject: Re: [PATCH 4.9 0/7] 4.9.314-rc1 review

On Fri, May 13, 2022 at 04:23:15PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.314 release.
> There are 7 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 15 May 2022 14:22:19 +0000.
> Anything received after that time might be too late.
>

Build results:
total: 163 pass: 163 fail: 0
Qemu test results:
total: 397 pass: 397 fail: 0

Tested-by: Guenter Roeck <[email protected]>

Guenter

2022-05-15 21:02:13

by Naresh Kamboju

[permalink] [raw]
Subject: Re: [PATCH 4.9 0/7] 4.9.314-rc1 review

On Fri, 13 May 2022 at 19:54, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.9.314 release.
> There are 7 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 15 May 2022 14:22:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.314-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <[email protected]>

## Build
* kernel: 4.9.314-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.9.y
* git commit: 0d0d580b3778c2a438b6315b8f80b87835d1f3e1
* git describe: v4.9.313-8-g0d0d580b3778
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.9.y/build/v4.9.313-8-g0d0d580b3778

## Test Regressions (compared to v4.9.312-67-gbc7a724ac0ce)
No test regressions found.

## Metric Regressions (compared to v4.9.312-67-gbc7a724ac0ce)
No metric regressions found.

## Test Fixes (compared to v4.9.312-67-gbc7a724ac0ce)
No test fixes found.

## Metric Fixes (compared to v4.9.312-67-gbc7a724ac0ce)
No metric fixes found.

## Test result summary
total: 64906, pass: 51271, fail: 739, skip: 11179, xfail: 1717

## Build Summary
* arm: 238 total, 238 passed, 0 failed
* arm64: 32 total, 32 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 22 total, 22 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 31 total, 31 passed, 0 failed

## Test suites summary
* fwts
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kselftest-zram[
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* ssuite
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org