From: Max Krummenacher <[email protected]>
Adapt the brightness steps as the backlight doesn't light up
for very low duty cycles.
Signed-off-by: Max Krummenacher <[email protected]>
---
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 49669caac8b7..62d9d907432c 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -20,8 +20,8 @@
backlight: backlight {
compatible = "pwm-backlight";
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <6>;
+ brightness-levels = <0 45 63 88 119 158 203 255>;
+ default-brightness-level = <4>;
enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_bl_on>;
--
2.20.1