From: Nick Hawkins <[email protected]>
The GXP is the HPE BMC SoC that is used in the majority
of current generation HPE servers. Traditionally the asic will
last multiple generations of server before being replaced.
Info about SoC:
HPE GXP is the name of the HPE Soc. This SoC is used to implement many BMC
features at HPE. It supports ARMv7 architecture based on the Cortex A9
core. It is capable of using an AXI bus to whicha memory controller is
attached. It has multiple SPI interfaces to connect boot flash and BIOS
flash. It uses a 10/100/1000 MAC for network connectivity. It has multiple
i2c engines to drive connectivity with a host infrastructure. There
currently are no public specifications but this process is being worked.
Previously there was a requirement to reset the EHCI controller for the
asic to boot. This functionality has been moved to the u-boot
bootloader.
Signed-off-by: Nick Hawkins <[email protected]>
---
v8:
* No change
v7:
* No change
v6:
* Adjusted title to match log entries
* Reconfigured commit message to be closer to 75 char.
* Add space before comment delimiter.
* Added a more elaborate Kconfig help section and fixed punctuation.
* Fixed l2c_aux_map initialization.
v5:
* Fixed version log
* Removed incorrect statement about reset.
v4:
* Removed unnecessary code: restart, iomap, init_machine
* Reordered Kconfig depends
* Removed SPARSE_IRQ, MULTI_IRQ_HANDLER, IRQ_DOMAIN, PINCTL from
Kconfig
v3:
* Put into proper patchset format
v2:
* No change
---
arch/arm/Kconfig | 2 ++
arch/arm/Makefile | 1 +
arch/arm/mach-hpe/Kconfig | 23 +++++++++++++++++++++++
arch/arm/mach-hpe/Makefile | 1 +
arch/arm/mach-hpe/gxp.c | 16 ++++++++++++++++
5 files changed, 43 insertions(+)
create mode 100644 arch/arm/mach-hpe/Kconfig
create mode 100644 arch/arm/mach-hpe/Makefile
create mode 100644 arch/arm/mach-hpe/gxp.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2e8091e2d8a8..13f77eec7c40 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -620,6 +620,8 @@ source "arch/arm/mach-highbank/Kconfig"
source "arch/arm/mach-hisi/Kconfig"
+source "arch/arm/mach-hpe/Kconfig"
+
source "arch/arm/mach-imx/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a2391b8de5a5..97a89023c10f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -179,6 +179,7 @@ machine-$(CONFIG_ARCH_FOOTBRIDGE) += footbridge
machine-$(CONFIG_ARCH_GEMINI) += gemini
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_HISI) += hisi
+machine-$(CONFIG_ARCH_HPE) += hpe
machine-$(CONFIG_ARCH_INTEGRATOR) += integrator
machine-$(CONFIG_ARCH_IOP32X) += iop32x
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
diff --git a/arch/arm/mach-hpe/Kconfig b/arch/arm/mach-hpe/Kconfig
new file mode 100644
index 000000000000..3372bbf38d38
--- /dev/null
+++ b/arch/arm/mach-hpe/Kconfig
@@ -0,0 +1,23 @@
+menuconfig ARCH_HPE
+ bool "HPE SoC support"
+ depends on ARCH_MULTI_V7
+ help
+ This enables support for HPE ARM based BMC chips.
+if ARCH_HPE
+
+config ARCH_HPE_GXP
+ bool "HPE GXP SoC"
+ depends on ARCH_MULTI_V7
+ select ARM_VIC
+ select GENERIC_IRQ_CHIP
+ select CLKSRC_MMIO
+ help
+ HPE GXP is the name of the HPE Soc. This SoC is used to implement many
+ BMC features at HPE. It supports ARMv7 architecture based on the Cortex
+ A9 core. It is capable of using an AXI bus to which a memory controller
+ is attached. It has multiple SPI interfaces to connect boot flash and
+ BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It
+ has multiple i2c engines to drive connectivity with a host
+ infrastructure.
+
+endif
diff --git a/arch/arm/mach-hpe/Makefile b/arch/arm/mach-hpe/Makefile
new file mode 100644
index 000000000000..8b0a91234df4
--- /dev/null
+++ b/arch/arm/mach-hpe/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_HPE_GXP) += gxp.o
diff --git a/arch/arm/mach-hpe/gxp.c b/arch/arm/mach-hpe/gxp.c
new file mode 100644
index 000000000000..ef3341373006
--- /dev/null
+++ b/arch/arm/mach-hpe/gxp.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
+
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+
+static const char * const gxp_board_dt_compat[] = {
+ "hpe,gxp",
+ NULL,
+};
+
+DT_MACHINE_START(GXP_DT, "HPE GXP")
+ .dt_compat = gxp_board_dt_compat,
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
+MACHINE_END
--
2.17.1
From: Nick Hawkins <[email protected]>
Enable HPE GXP Architecture and its watchdog for base support for HPE
GXP SoCs.
Signed-off-by: Nick Hawkins <[email protected]>
---
v8:
* No change
v7:
* No change
v6:
* Changed the title to match others in log
* Changed the patch description
* Ran savedefconfig to place GXP configs in file correctly
v5:
* Fix version log
v4:
* No change
v3:
* Put into proper patch format
* Modified the multi_v7_defconfig instead of creating a gxp_defconfig
v2:
* Created gxp_defconfig
---
arch/arm/configs/multi_v7_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 6e0c8c19b35c..bdbb1c90e65d 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -42,6 +42,8 @@ CONFIG_ARCH_HI3xxx=y
CONFIG_ARCH_HIP01=y
CONFIG_ARCH_HIP04=y
CONFIG_ARCH_HIX5HD2=y
+CONFIG_ARCH_HPE=y
+CONFIG_ARCH_HPE_GXP=y
CONFIG_ARCH_MXC=y
CONFIG_SOC_IMX50=y
CONFIG_SOC_IMX51=y
@@ -562,6 +564,7 @@ CONFIG_BCM47XX_WDT=y
CONFIG_BCM2835_WDT=y
CONFIG_BCM_KONA_WDT=y
CONFIG_BCM7038_WDT=m
+CONFIG_GXP_WATCHDOG=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
--
2.17.1
From: Nick Hawkins <[email protected]>
Create a section in MAINTAINERS for the GXP HPE architecture.
Signed-off-by: Nick Hawkins <[email protected]>
---
v8:
* No change
v7:
* Changed arch/arm/boot/dts/hpe-bmc-dl360gen10.dts to
arch/arm/boot/hpe-bmc*
* Changed arch/arm/boot/dts/hpe-gxp.dtsi to arch/arm/boot/dts/hpe-gxp*
* Changed arch/arm/mach-hpe/gxp.c to arch/arm/mach-hpe/
v6:
* Fixed subject to match other commits
* Removed hpe,gxp-wdt.yaml from file list
v5:
* Fixed commit message to list all previous changes
v4:
* Added ARM/ before HPE Title
* Changed MAINTAINED to Maintained
* Renamed gxp-timer.c to timer-gxp.c
* Renamed gxp.yaml to hpe,gxp.yaml
v3:
* Removed uncessary files
* Used proper patch-set format
v2:
* Fixed email address
* Removed multiple entries in favor of one
---
MAINTAINERS | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 40fa1955ca3f..ce28eb2843c6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2130,6 +2130,18 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
F: arch/arm/mach-sa1100/include/mach/jornada720.h
F: arch/arm/mach-sa1100/jornada720.c
+ARM/HPE GXP ARCHITECTURE
+M: Jean-Marie Verdun <[email protected]>
+M: Nick Hawkins <[email protected]>
+S: Maintained
+F: Documentation/devicetree/bindings/arm/hpe,gxp.yaml
+F: Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
+F: arch/arm/boot/dts/hpe-bmc*
+F: arch/arm/boot/dts/hpe-gxp*
+F: arch/arm/mach-hpe/
+F: drivers/clocksource/timer-gxp.c
+F: drivers/watchdog/gxp-wdt.c
+
ARM/IGEP MACHINE SUPPORT
M: Enric Balletbo i Serra <[email protected]>
M: Javier Martinez Canillas <[email protected]>
--
2.17.1
From: Nick Hawkins <[email protected]>
Add support for HPE GXP. The GXP is based on the cortex a9 processor and
supports arm7.
Signed-off-by: Nick Hawkins <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
v8:
* No change
v7:
* Resubmission to keep the patch series self contained. No change.
* Copied Reviewed-by tags from previous patch.
v6:
* Changed subject to match others in log.
* Changed the commit description.
* Changed the title in the .yaml from HPE BMC GXP SoC Driver to HPE BMC
GXP platforms.
* Added the oneOf attribute
* Fixed commit description to be close to 75 characters per line
v5:
* Fix version log
v4:
* Removed gxp.yaml
* Created hpe,gxp.yaml based on reviewer input
v3:
* Created gxp.yaml
v2:
* No change
---
.../devicetree/bindings/arm/hpe,gxp.yaml | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/hpe,gxp.yaml
diff --git a/Documentation/devicetree/bindings/arm/hpe,gxp.yaml b/Documentation/devicetree/bindings/arm/hpe,gxp.yaml
new file mode 100644
index 000000000000..224bbcb93f95
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hpe,gxp.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hpe,gxp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE BMC GXP platforms
+
+maintainers:
+ - Nick Hawkins <[email protected]>
+ - Jean-Marie Verdun <[email protected]>
+
+properties:
+ compatible:
+ oneOf:
+ - description: GXP Based Boards
+ items:
+ - enum:
+ - hpe,gxp-dl360gen10
+ - const: hpe,gxp
+
+required:
+ - compatible
+
+additionalProperties: true
+
+...
--
2.17.1
From: Nick Hawkins <[email protected]>
Add support for the HPE GXP SOC timer. The GXP supports several different
kinds of timers but for the purpose of this driver there is only support
for the General Timer. The timer has a 1us resolution and is 32 bits. The
timer also creates a child watchdog device as the register region is the
same.
Signed-off-by: Nick Hawkins <[email protected]>
---
v8:
* No change
v7:
* Changed Kconfig conditional statements around COMPILE_TEST
* Added select TIMER_OF if OF
v6:
* Changed global variable name from local_gxp_timer to gxp_timer while
removing the requirement for a local variable.
* Changed static void __iomem *system_clock to __ro_after_init from
__read_mostly
* Changed subject to match the format from the logs
* Removed stray tab in the argument for gxp_time_set_next_event
* Made the commit description fit to 75 characters per line
* Created watchdog child dynamically with platform_device_alloc
* Fixed spacing in comments
v5:
* Corrected version log
* Removed uncessary include file
v4:
* Made watchdog a child of timer as they share the same register
region
* Fixed watchdog init timeout call
* Fixed variable usage u32/u64
* Removed Read Once
* fixed error that should have been debug
v3:
* Put into proper patchset form
v2:
* No change
---
drivers/clocksource/Kconfig | 8 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-gxp.c | 209 ++++++++++++++++++++++++++++++++
3 files changed, 218 insertions(+)
create mode 100644 drivers/clocksource/timer-gxp.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 1589ae7d5abb..be4dab9c1345 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -617,6 +617,14 @@ config CLKSRC_ST_LPC
Enable this option to use the Low Power controller timer
as clocksource.
+config GXP_TIMER
+ bool "GXP timer driver" if COMPILE_TEST && !ARCH_HPE
+ default ARCH_HPE
+ select TIMER_OF if OF
+ help
+ Provides a driver for the timer control found on HPE
+ GXP SOCs. This is required for all GXP SOCs.
+
config RISCV_TIMER
bool "Timer for the RISC-V platform" if COMPILE_TEST
depends on GENERIC_SCHED_CLOCK && RISCV && RISCV_SBI
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 9c85ee2bb373..98017abf6c03 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -88,3 +88,4 @@ obj-$(CONFIG_GX6605S_TIMER) += timer-gx6605s.o
obj-$(CONFIG_HYPERV_TIMER) += hyperv_timer.o
obj-$(CONFIG_MICROCHIP_PIT64B) += timer-microchip-pit64b.o
obj-$(CONFIG_MSC313E_TIMER) += timer-msc313e.o
+obj-$(CONFIG_GXP_TIMER) += timer-gxp.o
diff --git a/drivers/clocksource/timer-gxp.c b/drivers/clocksource/timer-gxp.c
new file mode 100644
index 000000000000..8b38b3212388
--- /dev/null
+++ b/drivers/clocksource/timer-gxp.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/sched_clock.h>
+
+#define TIMER0_FREQ 1000000
+#define GXP_TIMER_CNT_OFS 0x00
+#define GXP_TIMESTAMP_OFS 0x08
+#define GXP_TIMER_CTRL_OFS 0x14
+
+/* TCS Stands for Timer Control/Status: these are masks to be used in */
+/* the Timer Count Registers */
+#define MASK_TCS_ENABLE 0x01
+#define MASK_TCS_PERIOD 0x02
+#define MASK_TCS_RELOAD 0x04
+#define MASK_TCS_TC 0x80
+
+struct gxp_timer {
+ void __iomem *counter;
+ void __iomem *control;
+ struct clock_event_device evt;
+};
+
+static struct gxp_timer *gxp_timer;
+
+static void __iomem *system_clock __ro_after_init;
+
+static inline struct gxp_timer *to_gxp_timer(struct clock_event_device *evt_dev)
+{
+ return container_of(evt_dev, struct gxp_timer, evt);
+}
+
+static u64 notrace gxp_sched_read(void)
+{
+ return readl_relaxed(system_clock);
+}
+
+static int gxp_time_set_next_event(unsigned long event, struct clock_event_device *evt_dev)
+{
+ struct gxp_timer *timer = to_gxp_timer(evt_dev);
+
+ /* Stop counting and disable interrupt before updating */
+ writeb_relaxed(MASK_TCS_TC, timer->control);
+ writel_relaxed(event, timer->counter);
+ writeb_relaxed(MASK_TCS_TC | MASK_TCS_ENABLE, timer->control);
+
+ return 0;
+}
+
+static irqreturn_t gxp_timer_interrupt(int irq, void *dev_id)
+{
+ struct gxp_timer *timer = (struct gxp_timer *)dev_id;
+
+ if (!(readb_relaxed(timer->control) & MASK_TCS_TC))
+ return IRQ_NONE;
+
+ writeb_relaxed(MASK_TCS_TC, timer->control);
+
+ timer->evt.event_handler(&timer->evt);
+
+ return IRQ_HANDLED;
+}
+
+static int __init gxp_timer_init(struct device_node *node)
+{
+ void __iomem *base;
+ struct clk *clk;
+ u32 freq;
+ int ret, irq;
+
+ gxp_timer = kzalloc(sizeof(*gxp_timer), GFP_KERNEL);
+ if (!gxp_timer) {
+ ret = -ENOMEM;
+ pr_err("Can't allocate gxp_timer");
+ return ret;
+ }
+
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ ret = (int)PTR_ERR(clk);
+ pr_err("%pOFn clock not found: %d\n", node, ret);
+ goto err_free;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("%pOFn clock enable failed: %d\n", node, ret);
+ goto err_clk_enable;
+ }
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ ret = -ENXIO;
+ pr_err("Can't map timer base registers");
+ goto err_iomap;
+ }
+
+ /* Set the offsets to the clock register and timer registers */
+ gxp_timer->counter = base + GXP_TIMER_CNT_OFS;
+ gxp_timer->control = base + GXP_TIMER_CTRL_OFS;
+ system_clock = base + GXP_TIMESTAMP_OFS;
+
+ gxp_timer->evt.name = node->name;
+ gxp_timer->evt.rating = 300;
+ gxp_timer->evt.features = CLOCK_EVT_FEAT_ONESHOT;
+ gxp_timer->evt.set_next_event = gxp_time_set_next_event;
+ gxp_timer->evt.cpumask = cpumask_of(0);
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0) {
+ ret = -EINVAL;
+ pr_err("GXP Timer Can't parse IRQ %d", irq);
+ goto err_exit;
+ }
+
+ freq = clk_get_rate(clk);
+
+ ret = clocksource_mmio_init(system_clock, node->name, freq,
+ 300, 32, clocksource_mmio_readl_up);
+ if (ret) {
+ pr_err("%pOFn init clocksource failed: %d", node, ret);
+ goto err_exit;
+ }
+
+ sched_clock_register(gxp_sched_read, 32, freq);
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0) {
+ ret = -EINVAL;
+ pr_err("%pOFn Can't parse IRQ %d", node, irq);
+ goto err_exit;
+ }
+
+ clockevents_config_and_register(&gxp_timer->evt, TIMER0_FREQ,
+ 0xf, 0xffffffff);
+
+ ret = request_irq(irq, gxp_timer_interrupt, IRQF_TIMER | IRQF_SHARED,
+ node->name, gxp_timer);
+ if (ret) {
+ pr_err("%pOFn request_irq() failed: %d", node, ret);
+ goto err_exit;
+ }
+
+ pr_debug("gxp: system timer (irq = %d)\n", irq);
+ return 0;
+
+err_exit:
+ iounmap(base);
+err_iomap:
+ clk_disable_unprepare(clk);
+err_clk_enable:
+ clk_put(clk);
+err_free:
+ kfree(gxp_timer);
+ return ret;
+}
+
+/*
+ * This probe gets called after the timer is already up and running. This will create
+ * the watchdog device as a child since the registers are shared.
+ */
+
+static int gxp_timer_probe(struct platform_device *pdev)
+{
+ struct platform_device *gxp_watchdog_device;
+ struct device *dev = &pdev->dev;
+
+ if (!gxp_timer) {
+ pr_err("Gxp Timer not initialized, cannot create watchdog");
+ return -ENOMEM;
+ }
+
+ gxp_watchdog_device = platform_device_alloc("gxp-wdt", -1);
+ if (!gxp_watchdog_device) {
+ pr_err("Timer failed to allocate gxp-wdt");
+ return -ENOMEM;
+ }
+
+ /* Pass the base address (counter) as platform data and nothing else */
+ gxp_watchdog_device->dev.platform_data = gxp_timer->counter;
+ gxp_watchdog_device->dev.parent = dev;
+
+ return platform_device_add(gxp_watchdog_device);
+}
+
+static const struct of_device_id gxp_timer_of_match[] = {
+ { .compatible = "hpe,gxp-timer", },
+ {},
+};
+
+static struct platform_driver gxp_timer_driver = {
+ .probe = gxp_timer_probe,
+ .driver = {
+ .name = "gxp-timer",
+ .of_match_table = gxp_timer_of_match,
+ .suppress_bind_attrs = true,
+ },
+};
+
+builtin_platform_driver(gxp_timer_driver);
+
+TIMER_OF_DECLARE(gxp, "hpe,gxp-timer", gxp_timer_init);
--
2.17.1
From: Nick Hawkins <[email protected]>
The HPE SoC is new to linux. A basic device tree layout with minimum
required for linux to boot including a timer and watchdog support has
been created.
The dts file is empty at this point but will be updated in subsequent
updates as board specific features are enabled.
Signed-off-by: Nick Hawkins <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
---
v8:
* No change
v7:
* Changed cache register area length from 0xFFC to 0x1000
* Added space between "," in compatible list for the
hpe-bmc-dl360gen10.dts
* Added aliases, chosen, and memory to hpe-bmc-dl360gen10.dts
* Removed memory from hpe-gxp.dtsi
v6:
* Added cache-controller to CPU
* Removed hpe,gxp-wdt and removed simple-mfd from hpe,gxp-timer
* Added space after ',' in compatible lists in the dtsi containing more
than one item
* Switched clock name iopclk to iop based on feedback from
hpe,gxp-timer.yaml
* Added clock labels clock-0 and clock-1
* Added dma-ranges to ahb
* Changed subject to better match ones in the log
* Changed description to fit 75 characters per line
v5:
* Fixed commit message to show previous changes
* Fixed typo ehci -> echi
v4:
* Removed hpe,gxp-cpu-init as it was no longer necessary
* Removed bootargs as requested
* Removed empty ahb node
* Moved reg after compatible, everywhere
* Removed osc and memclk
* Removed syscon@c00000f8 as it was not necessary for boot
* Fixed Alphabetical issue in dts/Makefile
* Added specific board binding for dl360gen10
* Removed empty node
* Added Accurate Clock Architecture
* Fixed generic-echi and generic-ochi issues
* Removed i2cg
v3:
* Fixed issues with warnings
* Used proper patchset format
v2:
* Reduced size of dtsi to essential components
* Followed the proper format for having a dtsi and
dts
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/hpe-bmc-dl360gen10.dts | 26 +++++
arch/arm/boot/dts/hpe-gxp.dtsi | 127 +++++++++++++++++++++++
3 files changed, 155 insertions(+)
create mode 100644 arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
create mode 100644 arch/arm/boot/dts/hpe-gxp.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7c16f8a2b738..293717719c70 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -255,6 +255,8 @@ dtb-$(CONFIG_ARCH_HISI) += \
hi3519-demb.dtb
dtb-$(CONFIG_ARCH_HIX5HD2) += \
hisi-x5hd2-dkb.dtb
+dtb-$(CONFIG_ARCH_HPE_GXP) += \
+ hpe-bmc-dl360gen10.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += \
integratorap.dtb \
integratorap-im-pd1.dtb \
diff --git a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
new file mode 100644
index 000000000000..3a7382ce40ef
--- /dev/null
+++ b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE DL360Gen10
+ */
+
+/include/ "hpe-gxp.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "hpe,gxp-dl360gen10", "hpe,gxp";
+ model = "Hewlett Packard Enterprise ProLiant dl360 Gen10";
+
+ aliases {
+ serial0 = &uartc;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x20000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe-gxp.dtsi
new file mode 100644
index 000000000000..cf735b3c4f35
--- /dev/null
+++ b/arch/arm/boot/dts/hpe-gxp.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE GXP
+ */
+
+/dts-v1/;
+/ {
+ model = "Hewlett Packard Enterprise GXP BMC";
+ compatible = "hpe,gxp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ device_type = "cpu";
+ next-level-cache = <&L2>;
+ };
+ };
+
+ clocks {
+ pll: clock-0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1600000000>;
+ };
+
+ iopclk: clock-1 {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clocks = <&pll>;
+ };
+ };
+
+ axi {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ dma-ranges;
+
+ L2: cache-controller@b0040000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xb0040000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ ahb@c0000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc0000000 0x30000000>;
+ dma-ranges;
+
+ vic0: interrupt-controller@eff0000 {
+ compatible = "arm,pl192-vic";
+ reg = <0xeff0000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ vic1: interrupt-controller@80f00000 {
+ compatible = "arm,pl192-vic";
+ reg = <0x80f00000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ uarta: serial@e0 {
+ compatible = "ns16550a";
+ reg = <0xe0 0x8>;
+ interrupts = <17>;
+ interrupt-parent = <&vic0>;
+ clock-frequency = <1846153>;
+ reg-shift = <0>;
+ };
+
+ uartb: serial@e8 {
+ compatible = "ns16550a";
+ reg = <0xe8 0x8>;
+ interrupts = <18>;
+ interrupt-parent = <&vic0>;
+ clock-frequency = <1846153>;
+ reg-shift = <0>;
+ };
+
+ uartc: serial@f0 {
+ compatible = "ns16550a";
+ reg = <0xf0 0x8>;
+ interrupts = <19>;
+ interrupt-parent = <&vic0>;
+ clock-frequency = <1846153>;
+ reg-shift = <0>;
+ };
+
+ usb0: usb@efe0000 {
+ compatible = "hpe,gxp-ehci", "generic-ehci";
+ reg = <0xefe0000 0x100>;
+ interrupts = <7>;
+ interrupt-parent = <&vic0>;
+ };
+
+ st: timer@80 {
+ compatible = "hpe,gxp-timer";
+ reg = <0x80 0x16>;
+ interrupts = <0>;
+ interrupt-parent = <&vic0>;
+ clocks = <&iopclk>;
+ clock-names = "iop";
+ };
+
+ usb1: usb@efe0100 {
+ compatible = "hpe,gxp-ohci", "generic-ohci";
+ reg = <0xefe0100 0x110>;
+ interrupts = <6>;
+ interrupt-parent = <&vic0>;
+ };
+ };
+ };
+};
--
2.17.1
From: Nick Hawkins <[email protected]>
Add support for the HPE GXP Timer and Watchdog. There are multiple
timers on the SoC but only one is enabled at this time.
Signed-off-by: Nick Hawkins <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
v8:
* No change
v7:
* Resubmission to fix subject from
dt-bindings: timer: hpe,gxp-timer: Creation to
dt-bindings: timer: hpe,gxp-timer: Add HPE GXP Timer and Watchdog
based on comment: 'The subject after prefixes does not match it better.
What is "creation"? "Add HPE GXP Timer and Watchdog"'
* Copied over Reviewed-by tags from previous patch.
v6:
* Removed simple-mfd compatible, timer will create watchdog without
watchdog node.
* Removed timer0 label
* Changed title from HPE GXP TIMER to HPE GXP Timer
* Changed clock name iopclk to iop
* Set additionalProperties to false
* Added space after ',' in the compatible list
* Changed subject to match the log better
* Altered description to take up 75 characters per line
* Changed description to better describe the patch
v5:
* Fix versioning
* Fixed typo time -> timer
v4:
* Made watchdog a child of timer
* Added reference clock
v3:
* Removed maintainer change from patch
* Verified there was no compilation errors
* Added reference code in separate patch of patchset
v2:
* Converted from txt to yaml
---
.../bindings/timer/hpe,gxp-timer.yaml | 47 +++++++++++++++++++
1 file changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
diff --git a/Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml b/Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
new file mode 100644
index 000000000000..d33d90f44d28
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/hpe,gxp-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP Timer
+
+maintainers:
+ - Nick Hawkins <[email protected]>
+ - Jean-Marie Verdun <[email protected]>
+
+properties:
+ compatible:
+ const: hpe,gxp-timer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: iop
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ timer@c0000000 {
+ compatible = "hpe,gxp-timer";
+ reg = <0x80 0x16>;
+ interrupts = <0>;
+ interrupt-parent = <&vic0>;
+ clocks = <&iopclk>;
+ clock-names = "iop";
+ };
--
2.17.1