2022-05-24 18:30:45

by Krishna Kurapati

Subject: [PATCH v17 5/5] usb: dwc3: qcom: Keep power domain on to retain controller status

From: Sandeep Maheswaram <[email protected]>

If dwc3 is wakeup capable, keep the power domain always ON so that
wakeup from system suspend can be supported. Otherwise, keep the
power domain ON only during runtime suspend to support wakeup from
runtime suspend.

Signed-off-by: Sandeep Maheswaram <[email protected]>
Signed-off-by: Krishna Kurapati <[email protected]>
---
drivers/usb/dwc3/dwc3-qcom.c | 24 +++++++++++++++++-------
1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 5d5db62..7bffb31 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -17,6 +17,7 @@
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
+#include <linux/pm_domain.h>
#include <linux/usb/of.h>
#include <linux/reset.h>
#include <linux/iopoll.h>
@@ -760,12 +761,13 @@ dwc3_qcom_create_urs_usb_platdev(struct device *dev)

static int dwc3_qcom_probe(struct platform_device *pdev)
{
- struct device_node *np = pdev->dev.of_node;
- struct device *dev = &pdev->dev;
- struct dwc3_qcom *qcom;
- struct resource *res, *parent_res = NULL;
- int ret, i;
- bool ignore_pipe_clk;
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct dwc3_qcom *qcom;
+ struct resource *res, *parent_res = NULL;
+ int ret, i;
+ bool ignore_pipe_clk;
+ struct generic_pm_domain *genpd;

qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL);
if (!qcom)
@@ -774,6 +776,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, qcom);
qcom->dev = &pdev->dev;

+ genpd = pd_to_genpd(qcom->dev->pm_domain);
+
if (has_acpi_companion(dev)) {
qcom->acpi_pdata = acpi_device_get_match_data(dev);
if (!qcom->acpi_pdata) {
@@ -881,7 +885,13 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
if (ret)
goto interconnect_exit;

- device_init_wakeup(&pdev->dev, 1);
+ if (device_can_wakeup(&qcom->dwc3->dev)) {
+ genpd->flags |= GENPD_FLAG_ALWAYS_ON;
+ device_init_wakeup(&pdev->dev, true);
+ } else {
+ genpd->flags |= GENPD_FLAG_RPM_ALWAYS_ON;
+ }
+
qcom->is_suspended = false;
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
--
2.7.4

2022-05-24 19:57:04

by Pavan Kondeti

Subject: Re: [PATCH v17 5/5] usb: dwc3: qcom: Keep power domain on to retain controller status

On Tue, May 24, 2022 at 03:43:48PM +0530, Krishna Kurapati wrote:
> From: Sandeep Maheswaram <[email protected]>
>
> If dwc3 is wakeup capable, keep the power domain always ON so that
> wakeup from system suspend can be supported. Otherwise, keep the
> power domain ON only during runtime suspend to support wakeup from
> runtime suspend.
>
> Signed-off-by: Sandeep Maheswaram <[email protected]>
> Signed-off-by: Krishna Kurapati <[email protected]>
> ---
> drivers/usb/dwc3/dwc3-qcom.c | 24 +++++++++++++++++-------
> 1 file changed, 17 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 5d5db62..7bffb31 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -17,6 +17,7 @@
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> #include <linux/phy/phy.h>
> +#include <linux/pm_domain.h>
> #include <linux/usb/of.h>
> #include <linux/reset.h>
> #include <linux/iopoll.h>
> @@ -760,12 +761,13 @@ dwc3_qcom_create_urs_usb_platdev(struct device *dev)
>
> static int dwc3_qcom_probe(struct platform_device *pdev)
> {
> - struct device_node *np = pdev->dev.of_node;
> - struct device *dev = &pdev->dev;
> - struct dwc3_qcom *qcom;
> - struct resource *res, *parent_res = NULL;
> - int ret, i;
> - bool ignore_pipe_clk;
> + struct device_node *np = pdev->dev.of_node;
> + struct device *dev = &pdev->dev;
> + struct dwc3_qcom *qcom;
> + struct resource *res, *parent_res = NULL;
> + int ret, i;
> + bool ignore_pipe_clk;
> + struct generic_pm_domain *genpd;
>
> qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL);
> if (!qcom)
> @@ -774,6 +776,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
> platform_set_drvdata(pdev, qcom);
> qcom->dev = &pdev->dev;
>
> + genpd = pd_to_genpd(qcom->dev->pm_domain);
> +
> if (has_acpi_companion(dev)) {
> qcom->acpi_pdata = acpi_device_get_match_data(dev);
> if (!qcom->acpi_pdata) {
> @@ -881,7 +885,13 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
> if (ret)
> goto interconnect_exit;
>
> - device_init_wakeup(&pdev->dev, 1);
> + if (device_can_wakeup(&qcom->dwc3->dev)) {
> + genpd->flags |= GENPD_FLAG_ALWAYS_ON;
> + device_init_wakeup(&pdev->dev, true);
> + } else {
> + genpd->flags |= GENPD_FLAG_RPM_ALWAYS_ON;
> + }
> +

Can you please write a comment here explaining why we do this?
commit description has some details already.

Thanks,
Pavan