From: Michael Kao <[email protected]>
Add Mediatek proprietary folder to upstream more thermal zone and cooler
drivers. Relocate the original thermal controller driver to it and rename
as soc_temp.c to show its purpose more clearly.
Signed-off-by: Michael Kao <[email protected]>
Signed-off-by: Ben Tseng <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
---
drivers/thermal/Kconfig | 14 ++++-------
drivers/thermal/Makefile | 2 +-
drivers/thermal/mediatek/Kconfig | 23 +++++++++++++++++++
drivers/thermal/mediatek/Makefile | 1 +
.../{mtk_thermal.c => mediatek/soc_temp.c} | 0
5 files changed, 29 insertions(+), 11 deletions(-)
create mode 100644 drivers/thermal/mediatek/Kconfig
create mode 100644 drivers/thermal/mediatek/Makefile
rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (100%)
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index e37691e0bf20..8669d7278055 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -410,16 +410,10 @@ config DA9062_THERMAL
zone.
Compatible with the DA9062 and DA9061 PMICs.
-config MTK_THERMAL
- tristate "Temperature sensor driver for mediatek SoCs"
- depends on ARCH_MEDIATEK || COMPILE_TEST
- depends on HAS_IOMEM
- depends on NVMEM || NVMEM=n
- depends on RESET_CONTROLLER
- default y
- help
- Enable this option if you want to have support for thermal management
- controller present in Mediatek SoCs
+menu "Mediatek thermal drivers"
+depends on ARCH_MEDIATEK || COMPILE_TEST
+source "drivers/thermal/mediatek/Kconfig"
+endmenu
config AMLOGIC_THERMAL
tristate "Amlogic Thermal Support"
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index f0c36a1530d5..9ade39bdb525 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -55,7 +55,7 @@ obj-y += st/
obj-$(CONFIG_QCOM_TSENS) += qcom/
obj-y += tegra/
obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
-obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
+obj-$(CONFIG_MTK_THERMAL) += mediatek/
obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o
obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o
diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
new file mode 100644
index 000000000000..592c849b9fed
--- /dev/null
+++ b/drivers/thermal/mediatek/Kconfig
@@ -0,0 +1,23 @@
+config MTK_THERMAL
+ tristate "MediaTek thermal drivers"
+ depends on THERMAL_OF
+ help
+ This is the option for MediaTek thermal software
+ solutions. Please enable corresponding options to
+ get temperature information from thermal sensors or
+ turn on throttle mechaisms for thermal mitigation.
+
+if MTK_THERMAL
+
+config MTK_SOC_THERMAL
+ tristate "Temperature sensor driver for MediaTek SoCs"
+ depends on HAS_IOMEM
+ depends on NVMEM
+ depends on RESET_CONTROLLER
+ help
+ Enable this option if you want to get SoC temperature
+ information for MediaTek platforms. This driver
+ configures thermal controllers to collect temperature
+ via AUXADC interface.
+
+endif
diff --git a/drivers/thermal/mediatek/Makefile b/drivers/thermal/mediatek/Makefile
new file mode 100644
index 000000000000..f75313ddce5e
--- /dev/null
+++ b/drivers/thermal/mediatek/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MTK_SOC_THERMAL) += soc_temp.o
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mediatek/soc_temp.c
similarity index 100%
rename from drivers/thermal/mtk_thermal.c
rename to drivers/thermal/mediatek/soc_temp.c
--
2.35.1
Il 24/05/22 17:25, Alexandre Bailon ha scritto:
> From: Michael Kao <[email protected]>
>
> Add Mediatek proprietary folder to upstream more thermal zone and cooler
> drivers. Relocate the original thermal controller driver to it and rename
> as soc_temp.c to show its purpose more clearly.
>
> Signed-off-by: Michael Kao <[email protected]>
> Signed-off-by: Ben Tseng <[email protected]>
> Reviewed-by: Matthias Brugger <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>