This driver specified the maximum value rather than the number of volume
levels on the SX controls, this is incorrect, so correct them.
Reported-by: David Rhodes <[email protected]>
Signed-off-by: Charles Keepax <[email protected]>
---
sound/soc/codecs/cs53l30.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/sound/soc/codecs/cs53l30.c b/sound/soc/codecs/cs53l30.c
index 703545273900f..360ca2ffd5069 100644
--- a/sound/soc/codecs/cs53l30.c
+++ b/sound/soc/codecs/cs53l30.c
@@ -348,22 +348,22 @@ static const struct snd_kcontrol_new cs53l30_snd_controls[] = {
SOC_ENUM("ADC2 NG Delay", adc2_ng_delay_enum),
SOC_SINGLE_SX_TLV("ADC1A PGA Volume",
- CS53L30_ADC1A_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
+ CS53L30_ADC1A_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
SOC_SINGLE_SX_TLV("ADC1B PGA Volume",
- CS53L30_ADC1B_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
+ CS53L30_ADC1B_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
SOC_SINGLE_SX_TLV("ADC2A PGA Volume",
- CS53L30_ADC2A_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
+ CS53L30_ADC2A_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
SOC_SINGLE_SX_TLV("ADC2B PGA Volume",
- CS53L30_ADC2B_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
+ CS53L30_ADC2B_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
SOC_SINGLE_SX_TLV("ADC1A Digital Volume",
- CS53L30_ADC1A_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
+ CS53L30_ADC1A_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
SOC_SINGLE_SX_TLV("ADC1B Digital Volume",
- CS53L30_ADC1B_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
+ CS53L30_ADC1B_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
SOC_SINGLE_SX_TLV("ADC2A Digital Volume",
- CS53L30_ADC2A_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
+ CS53L30_ADC2A_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
SOC_SINGLE_SX_TLV("ADC2B Digital Volume",
- CS53L30_ADC2B_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
+ CS53L30_ADC2B_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
};
static const struct snd_soc_dapm_widget cs53l30_dapm_widgets[] = {
--
2.30.2