A couple of the SX volume controls specify 0x84 as the lowest volume
value, however the correct value from the datasheet is 0x44. The
datasheet don't include spaces in the value it displays as binary so
this was almost certainly just a typo reading 1000100.
Signed-off-by: Charles Keepax <[email protected]>
---
sound/soc/codecs/cs42l56.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/cs42l56.c b/sound/soc/codecs/cs42l56.c
index dc23007336c58..510c94265b1f0 100644
--- a/sound/soc/codecs/cs42l56.c
+++ b/sound/soc/codecs/cs42l56.c
@@ -391,9 +391,9 @@ static const struct snd_kcontrol_new cs42l56_snd_controls[] = {
SOC_DOUBLE("ADC Boost Switch", CS42L56_GAIN_BIAS_CTL, 3, 2, 1, 1),
SOC_DOUBLE_R_SX_TLV("Headphone Volume", CS42L56_HPA_VOLUME,
- CS42L56_HPB_VOLUME, 0, 0x84, 0x48, hl_tlv),
+ CS42L56_HPB_VOLUME, 0, 0x44, 0x48, hl_tlv),
SOC_DOUBLE_R_SX_TLV("LineOut Volume", CS42L56_LOA_VOLUME,
- CS42L56_LOB_VOLUME, 0, 0x84, 0x48, hl_tlv),
+ CS42L56_LOB_VOLUME, 0, 0x44, 0x48, hl_tlv),
SOC_SINGLE_TLV("Bass Shelving Volume", CS42L56_TONE_CTL,
0, 0x00, 1, tone_tlv),
--
2.30.2